Preliminary CBC-EVAL-12-34813 EnerChip™ RTC Evaluation Kit CBC34813 Real-Time Clock with Integrated Backup Power System Features and Overview CBC-EVAL-12-34813 is a demonstration kit featuring the Cymbet CBC34813 EnerChip RTC - an integrated surface mount device combining an Ambiq Micro AM0813 Real-Time Clock (RTC), power management circuit, and solid state rechargeable EnerChip providing up to 100 hours of backup power to the RTC. The kit demonstrates just how compact an RTC with integrated backup power can be using the low profile surface mount device from Cymbet. The combined solution occupies only 0.25 cm2 of board space. CBC-EVAL-12-34813 has the following elements: • • • • • • Low power RTC with SPI-interface bus Solid state rechargeable energy storage for realtime clock backup power Power fail detect with automatic switchover from main power to integrated backup power source Integrated battery management that controls battery charging and discharge cutoff, ensuring maximum service life of the on-board storage cell USB connector for easy demonstration and application development on personal computer Input/output access to board for easy connection to external microcontroller Figure 2 shows the USB Interface Board to the left, and the CBC34813 EnerChip RTC Tab Board to the right. Figure 2: CBC-EVAL-12-34813 Demo Kit. EVAL-12 Graphical User Interface The CBC-EVAL-12-34813 includes a PC-based software application that communicates with the USB stick. Users can set the time of day, date, and countdown timer values to experiment with RTC power-back-up. The application also allows the user access to the RTC registers for viewing and modification. The software works with Microsoft Windows XP, Windows 7, and Windows 8 operating systems. Once the EVAL-12 USB stick is inserted into the PC, the Connect button is clicked in the GUI to establish communication over the USB port. The entire USB stick or just the CBC34813 Tab Board can then be removed from the PC and the RTC will be powered by the EnerChip rechargeable solid state battery that is integrated within the CBC34813 5mm x 5mm QFN package on the CBC34813 Tab Board. Smallest RTC Power Backup Footprint Graphical User Interface for Easy Application Development! The block diagram of Figure 1 illustrates the CBCEVAL-12-34813, an extremely compact low power RTC with integrated backup power source. Cymbet EnerChip and Power Management Solid state backup power source with integrated power management 5-pin computer interface to CBC34813 CBC34813 EnerChip RTC AM0813 Real-Time Clock USB interface circuit and connector Figure 1: CBC-EVAL-12-34813 Block Diagram. Full Access to RTC Registers! ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 1 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit CBC-EVAL-12 Module Connector, Jumpers, and Test Points J5 J3 J6 J4 Figure 3: Locations of Jumpers. JUMPERS AND CONNECTORS Jumper J3 J4 J5 J6 Pin Number Designation 1 EXT ENERCHIP (+) 2 EXT ENERCHIP (-) PCB Trace RTC PWR - Cut jumper to disable RTC ‘PWR’ LED 1 GND 2 POWER 3 SPI-SCL 4 INT/ 5 SPI-SDI 6 NC 7 SPI-SDO 8 NC 9 SPI-CE 10 NC 11 RESET/ 12 EN 13 NC 14 FOUT 15 GND 16 POWER PCB Trace ENABLE - Cut jumper to enable/disable the CBC34813 charge pump ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 2 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit Getting Started BEFORE inserting the USB dongle into the USB port, proceed with the file downloads as described below. For first time users who have not installed the demonstration software, follow these steps: 1. Download the CBC-EVAL-12-34813 files from the web site and save them to your computer: The directory structure loaded to your computer will look like the following: 2. Do not yet insert any hardware into the USB port. Launch the application by clicking on CDM20830_Setup. 3. A dialog box will appear, asking: “Do you want to allow the following program to make changes to this computer?” Click the ‘Yes’ option. 4. The following window will appear. Click ‘Extract.’ ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 3 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit 5. When the following window appears click ‘Next.’ 6. Once the files have loaded, the following window will appear. Click ‘Finish.’ This installs the files pertaining to the USB interface. 7. Next, launch the application by opening the setup file - as highlighted in the following diagram - located in the directory. ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 4 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit 8. When the following window appears, click ‘Next.’ ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 5 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit 9. When the following window appears, select an installation folder destination on your computer and click ‘Next.’ 10. The following window will appear. Again, click ‘Next.’ ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 6 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit 11. The following window will appear. Allow the installation to continue and when the message “Do you want to allow the following program from an unknown publisher to make changes to this computer?” appears, answer ‘Yes.’ 12. Once the installation is complete, the following window will appear. Click ‘Close.’ ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 7 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit 13. There should now be an EVAL12 Demo Shortcut icon on your desktop, as shown below. Double-click on the icon to launch the Graphical User Interface (GUI). GUI installation is now complete. The following window should appear. 14. Insert the CBC-EVAL-12-34813 dongle into the USB port. It can take up to a minute for the computer to recognize the new hardware. 15. Both red LEDs on the EVAL stick - one on the USB board and the other on the Tab Board - should be lit. Click the ‘Connect’ button on the GUI. The computer’s system time should now appear active in the GUI. At the top right of the window, ‘CBC-TAB-34813 Found’ is indicated, along with ‘Messages: RTC Connected’ at the top left. ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 8 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit CBC-TAB-34813 Found 16. Click ‘RTC EC Power’ to disable power from the dongle. The ‘RTC EC Power’ indicator on the GUI will turn off, as will the ‘PWR’ LED on the CBC34813 Tab Board. Click ‘RTC EC Power’ to again apply power to the dongle. 17. There are several configuration options available to the user from the ‘RTC Control’ menu. To view the available options, open the ‘RTC Control’ drop-down menu and select from the 3 options as shown below. ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 9 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit 18. The ‘Set RTC Date/Time’ option allows the user to set a specific date and time. Enter any arbitrary date and time as the starting time, using either the drop-down calendar menu, or by manually entering the data. Click ‘OK’ to execute the command. CBC-TAB-34813 Found The ‘RTC Count Down Timer’ option allows the user to apply a value from 0 to 255 in ‘Secs’ field. CBC-TAB-34813 Found 19. Enter a valid number and click ‘OK’ to execute the command. The timer will then be set and begin to count down to zero. ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 10 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit CBC-TAB-34813 Found 20. The system set-up is now complete. Once the countdown timer or date and time have been set, the integrated EnerChip battery can be used to maintain the timer or real time by either disabling power from the dongle by clicking the ‘RTC EC Power’ button or removing the dongle from the USB port. In the absence of USB power, the EnerChip will provide power to the AM0813 RTC for up to 100 hours. Simply re-insert the dongle or re-apply power to verify that the countdown timer or time and date were maintained while the dongle was not under USB power. RTC Register Access The AM0813 registers are also accessible through the EVAL-12 GUI. Select the ‘Show RTC Registers’ option to view and modify the RTC register settings as shown below. ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 11 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit From this window, click on the ‘Get Registers’ box to reveal the bit settings. An example of the register map is shown in the following window. To adjust the registers, click on either the ‘Bit Set’ or ‘Bit Reset’ box in the lower left corner of the register map, window then click on the field in one of the ‘Bit’ columns to set or reset, respectively, that register bit. When finished setting the register fields, click the ‘Set Register’ button in the lower right corner of the window. When finished using the CBC-EVAL-12-34813, click the ‘RTC EC Power’ button in the main GUI window to turn off power to the module. Then click on the ‘Disconnect’ button and remove the USB dongle from the computer. ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 12 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit Reference Documents CBC34813 EnerChip RTC Data Sheet: http://www.cymbet.com/pdfs/DS-72-38.pdf . Ambiq Micro Real-Time Clock Data Sheet: http://ambiqmicro.com Guidelines for crystal selection and other important information pertaining to the AM0813: http://ambiqmicro. com/resource-center/ CBC-EVAL-12-34813 Circuit Schematic The schematic of Figure 4 depicts the CBC-EVAL-12-34813 RTC board. For the purpose of supporting hardware development, CBC34813 package pins are accessible by way of through-hole vias 1-16 of J5 on the Tab Board. Additional backup run time is supported by connecting external EnerChips to the CBC34813 by way of throughhole vias 1-2 of J3. Figure 4: CBC-EVAL-12-34813 EnerChip RTC Board Circuit Schematic. Table 1: CBC-EVAL-12-34813 EnerChip RTC Board Bill of Materials. ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 13 of 14 CBC-EVAL-12-34813 EnerChip CC RTC Evaluation Kit CBC-EVAL-12 Assembly Diagrams Figure 5: CBC-EVAL-12-34813 EnerChip RTC Board Assembly Diagram (Top View). Figure 6: CBC-EVAL-12-34813 EnerChip RTC Board Assembly Diagram (Bottom View). Ordering Information EnerChip Part Number CBC34813-M5C CBC-EVAL-12-34813 CBC-TAB-34813 Description EnerChip RTC SPI 5uAh 0813 5x5 QFN -20-70C EnerChip RTC CBC34813 Evaluation Kit USB and RTC Tab Board Notes Tube EnerChip EVAL-12 CBC34813 Tab Board Disclaimer of Warranties; As Is The information provided in this data sheet is provided “As Is” and Cymbet Corporation disclaims all representations or warranties of any kind, express or implied, relating to this data sheet and the Cymbet battery product described herein, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, non-infringement, title, or any warranties arising out of course of dealing, course of performance, or usage of trade. Cymbet battery products are not approved for use in life critical applications. Users shall confirm suitability of the Cymbet battery product in any products or applications in which the Cymbet battery product is adopted for use and are solely responsible for all legal, regulatory, and safety-related requirements concerning their products and applications and any use of the Cymbet battery product described herein in any such product or applications. Cymbet, the Cymbet Logo and EnerChip are trademarks of Cymbet Corporation. All Rights Reserved. EnerChip products and technology are covered by one or more patents or patents pending. ©2013 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com DS-72-39 V0.6 Page 14 of 14