Astrodyne AHP3201-07 30w medical grade switching power supply Datasheet

medical
HPU32A series
30W External Medical Grade Power Supply
The HPU32A series of AC/DC switching mode power supplies
AHP3201
FEATURES:
output power . All supplies are
Operating
30Wprovide
Me30min
dWatts
icompliant.
c aofl continuous
GrAllade
S wFCCi tPart-18
c hi ng
ow er* Wide
S up
p lieVoltage,
s 80 to 275 VAC, 47 to 63 Hz
UL94V-1
models meet
class BP
and
CISPR-11 EN55011 class B emission Limits and are designed to
comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN
60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements.
All units are 100% burned in and tested.
RoHS2
2011/65/EU
* IEC-320-C18 Input Inlet
* Single Output
* Over Voltage and Over Load protection
* Medical Safety 3rd (IEC60601-1 3rd Edition)
* Input to Output : 2MOPP
* Energy Star 2.0, Efficiency level V
* Class II system
* 3 year warranty
series
Wide 80-275VAC Input, 47 to 63Hz
IEC60601-1 3rd Edition: 2MOPP
APPLICATIONS:
* Home Healthcare Equipment
* Patient Monitor
* Blood Pressure system
* Portable medical devices
* ECG machine
Input Option “A”
APPROVALS:
CB
Input Option “B”
EN 60601-1
IEC 60601-1
RT
PS
E
GENERAL SPECIFICATION:
Single Output
HPU63B series
The HPU63B
series
Efficiency
Level
Vof AC/DC switching mode power supplies
provide 63 Watts of continuous output power . All supplies are
Class II
All units are 100% burned in and tested.
Vins
Safety Approval Input Voltage Range
Safety Approval & Specification in Label
100
Typ. Max. Unit
240 VAC
Vin
Input Operate Voltage Range
Detail to see Fig.1 (Derate linearly from 100% load at 90VAC to 80% load at 80VAC)
80
275
Fi
Input Frequency
Sine wave
47
Po
Output Power Range
See Rating Chart
Iih
High Line Input Current
Full Load, Vin=240VAC
Low Line Input Inrush Current
5VDC
4.0
Full Load,
Vin=230VAC,
Detail
to
see
Rating
6VDC
3.83Chart
Full Load, Vin=100~120VAC or 200~240VAC
10VDC
2.7
Recovers
automatically
after
fault
condition
12VDC
2.5 is removed
Full Load, Vin=110VAC
15VDC
2.0
Full Load, Vin=100VAC
18VDC
1.66
Full Load, Vin=100~240VAC
All Condition
24VDC
1.25
Primary to Secondary, limit current <10mA
30VDC
1.0
Compliance to EN55011 (CISPR11), EN61000-3-2,-3
36VDC
0.83
48VDC
0.625
Condition
Symbol
Low Line Input Current
Full Load, Vin=100VAC
Iil
Model
Number
Output Watts
Output Voltage
Irl
To
Note:Ts
Min.
Condition
Characteristic
*AHP3201(A,B)-02
20Current
High Line Input Inrush
Irh
Efficiency
*AHP3201(A,B)-03
23
Line Regulation
△Voi
*AHP3201(A,B)-04
27
Over Voltage Protection
OVP
OLP
Over
Load
Protection
*AHP3201(A,B)-05
30
Time of Transient Response
ttr
*AHP3201(A,B)-06
30
Hold-Up Time
thu
*AHP3201(A,B)-07
30
Start-up
time
ts
Temperature Coefficient
Tc
*AHP3201(A,B)-08
30
Dielectric Withstanding Voltage (P-S)
HV
*AHP3201(A,B)-09
30
EMC Emission
EMI
*AHP3201(A,B)-10
30
Environmental:
*AHP3201(A,B)-11
30
Symbol
Characteristic
63
* Short Circuit Protection: Auto Recovery
UL94V-1 min compliant. All models meet FCC Part-18 class B and
* Cooling: Free Air Convection
CISPR-11 EN55011 class B emission Limits and are designed to
* Flammability Rating: UL94V-1
* Protection Classes: Double insulated, Classcomply
II
with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN
* Safety: ANSI/AAMI ES 60601-1:2005(UL/cUL 3rd Edition), EN 60601-1:2006
60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements.
(TUV/T-mark 3rd Edition)
Electrical Characteristics:
*
medical
Choice of 2 Input Configurations
Output Amps
Full Load, 25°C, Cool start, Vin=100VAC
Full Load, 25°C, Cool start, Vin=240VAC
63
30
Efficiency
VAC
Hz
W
A
A
A
A
0.6
Total
Regulation
0.4
28
80%
±5%
67
See
Rating
Chart
80%
±5%
1
%
81% 112
±5%
132
%
%
150
81% 110
±5%
ms
4
83% 12
±5% ms
APPROVALS:
83% 0.3
±5%2 %/°C
s
±0.04
85%
±3%
4000
VAC
85%
±3% Class
B
86%
±3%
Electrical
Characteristics:
86%
Max.
SymbolMin. Typ.±3%
Unit
Characteristic
CB
Operating Temperature
Detail to see Fig.2 (Derate linearly from 100% load at 40°C to 50% load at 70°C)
-10
Safety
Storage Temperature
10 ~ 95% RH
-40
Vins
RoHS2
2011/65/EU
Ripple & Noise
50mV pk-pk
60mV pk-pk
80mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
100mV pk-pk
EN 60601-1
IEC 60601-1
°C
70
Approval
Input Voltage Range
85
°C
Input
Operate
Voltage Range
0
95% RH
PS
E
FEATU
* Wide O
* IEC-32
* Single
* Over V
* Medic
* Input t
* Energy
* Class II
* 3 year
APPLIC
* Home
* Patien
* Blood
* Portab
* ECG m
GENER
* Short C
* Coolin
* Flamm
* Protec
* Safety
(TUV/T-m
Safety Approval & Specification i
Detail to see Fig.1 (Derate linearly
Ho
Operating Humidity
non-condensing
Vin
ESDc
Electro Static Discharge
Contact Discharge, IEC61000-4-2
Iil
MTBF
Mean Time Between Failure
Operating Temperature at 25°C, Calculated per MIL-HDBK-217F
Iih
ELEV
Operating Altitude (Elevation)
All condition
3000 m
Low Line Input
Inrush Current
VBR
Vibration
10 ~ 500Hz, 10min./1cycle, 60min. each along X, Y, Z axes
Irl
Irh
High Line Input Inrush Current
Efficiency
Full Load, Vin=230VAC, Detail to
△Voi
Line Regulation
Full Load, Vin=100~120VAC or 20
OVP
Over Voltage Protection
The Asterisk
* denotes a choice of receivingSeethis
product with an IEC-320-C18, 2 Prong Input Receptacle
(A) orFrequency
with
an IEC-320-C8, 2 Pole InputSine
Receptacle
(B).
Rating Chart
Storage Humidity
0
95% RH
Input
Hs
wave
Fi
See the
files at the end of this specification
for clarity. Simply add the letter “A” or “B” after “AHP3201”
in the kV
model number (i.e. “AHP3201A-05” for C18
VsgMechanical
Surge Voltage
2
All Condition
Output Power Range
See Rating Chart
Po
or “AHP3201B-05”
for C8)
when ordering toAirreceive
the
desired version.
Discharge,
IEC61000-4-2
Discharge
8
ESDa Electro Static
kV
WWW.ASTRODYNETDI.COM
Low
Line Input Current
6
kV
100k
High
h
Line Input Current
G
5
Full Load, Vin=100VAC
Full Load, Vin=240VAC
Full Load, 25°C, Cool start, Vin=1
Full Load, 25°C, Cool start, Vin=2
OLP
Over Load Protection
Recovers automatically after fau
ttr
Time of Transient Response
Full Load, Vin=110VAC
thu
Hold-Up Time
Full Load, Vin=100VAC
ts
Start-up time
Full Load, Vin=100~240VAC
Tc
Temperature Coefficient
All Condition
HV
Dielectric Withstanding Voltage (P-S)
Primary to Secondary, limit curre
EMI
EMC Emission
Compliance to EN55011 (CISPR1
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Environmental:
Symbol
Characteristic
AHP3201
30W Me d i c a l Gr ade S w i t c hi ng P ow er S up p lie s
INPUT SPECIFICATIONS
Input Voltage Range
Frequency Range
Input Current
Inrush Current, typ (Cold Start)
No Load Power Consumption
PHYSICAL SPECIFICATIONS
80-275 VAC (100-240 Nominal)
47-63 Hz
Low Line (100VAC)
0.6A max.
High Line (240VAC)
0.4A max.
Low Line (100VAC)
28A max.
High Line (240VAC)
67A max.
0.3 Watts
OUTPUT SPECIFICATIONS
Voltage and Current
Output Power Range
Total Regulation
Line Regulation (FL) (Note 3)
Over Load Protection*
Over Voltage Protection*
Short Circuit Protection
Transient Response
Temperature Coefficient
Ripple/Noise (Note 1)
Hold Up Time (Note 2)
Start Up Time
See Selection Chart
0 to FL Rating
See Selection Chart
±1%, max.
110-150%, Auto-Recovery
112-132%
Auto Recovery
110Vin, FL
4mS
±0.04%/°C, typ
See Selection Chart
100~240Vin, FL
12mS min.
100~240Vin, FL 0.3S typ., 2S max.
GENERAL SPECIFICATIONS
Input-Out Isolation
Input-GND
Isolation Resistance
Efficiency
Safety
Class
series
4000 VAC, Limit Current <10mA
2800 VDC
50MΩ
(FL, 230Vin) See Selection Chart
ANSI/AAMI ES 60601-1:2005
(UL/cUL 3rd Edition),
EN 60601-1:2006
(TUV/T-mark 3rd Edition)
Class II
Size
Construction
Weight
Flammability Rating
4.21” x 1.85” x 1.17”
(107 x 47 x 29.6mm)
Desktop Style
9.87 oz (280g)
UL94V-1
ENVIRONMENTAL SPECIFICATIONS
Oper. Temperature
Cooling
Storage Temperature
Operating Humidity
EMC
MTBF (MIL-HDBK-217F)
Surge Voltage
ESD - Air
ESD - Contact
Operating Altitude (Elevation)
Vibration
-10 to +40°C (FL) *
50% Load @ 70°C
(See Derate Curve Last Page)
Free Air Convection
-40 to +85°C, 10~95% RH *
0% to 95%, non-cond *
Compliance to EN55011 (CISPR11),
EN61000-3-2, -3 Class B
100,000 Hrs
2kV
IEC61000-4-2, 8kV
IEC61000-4-2, 6kV
3000M
5G, 10 ~ 500Hz, 10min./1cycle,
60min. each along X, Y, Z axes
NOTES
1. Ripple & noise is measured by using 20MHz bandwidth limited
oscilloscope and terminated each output with a 0.47uF capacitor at
rated load and nominal line.
2. Hold up time is measured from the end of the last charging pulse to
the time which the main output drops down to low limit of main output at
rated load and nominal line.
3. Full Load, Vin=100~120VAC or 200~240VAC
* These are stress ratings. Exposure of the devices to any of these conditions
All specifications are typical at nominal input, full load, and 25°C unless otherwise noted
WWW.ASTRODYNETDI.COM
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
LOA
nominal line at rated load.
4. Load regulation is defined by changing ±40% of measured output load
from 60% rated load.
5. Ripple & noise is measured by using 20MHz bandwidth limited
oscilloscope and terminated each output with a 0.47uF capacitor at
rated load and nominal line.
6. Hold up time is measured from the end of the last charging pulse to the
time which the main output drops down to low limit of main output at
rated load and nominal line.
7. Efficiency is measured at rated load, and nominal line.
8. The specifics for testing the energy efficiency of this Series are outlined
in a separate document titled "Test Method for Calculating the Energy
Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power
Supplies (August 11, 2004)," which is available on the ENERGY STAR
DIMENSIONSWebsite.
- AHP3101B
70
60
50
80
120
140
160
180
200
220
INPUT VOLTAGE (VAC)
(FIG.1) INPUT VOLTAGE DERATING CURVE
2
110
100
AHP3201
90
30W Me d i c a l Gr ade S w i t c hi ng P ow er S up p lie s
MECHANICAL
100
80
70
series
60
50
40
30
Dimensions are In mm [inches].
20
10
0
-10
0
10
DC OUTPUT CONNECTIONS
MECHANICAL DIMENSIONS: ( UNIT: mm )
-Vout
20
30
40
50
TEMPERATURE (°C)
(FIG.2) TEMPERATURE DERATING CURVE
60
OUTPUT CABLE RECOMMEND :
+Vout
1. Selected output connectors and wire, please refer to Ap
Coaxial
Plug:
2. HPU32A-102~104 are required to use AWG#16/ 4FT out
5.5mm3.outer
diameter
HPU32A-105~111
are required to use AWG#18/ 6FT out
2.1mm4.inner
female
The diameter,
regulation
and efficiency will be changed by modifie
11mm length, center “+”
PACKING :
1. Net weight: 265~280g approx.
2. Optional output connectors available contact sales for d
Rating Chart:
Ripple & Noise
Total Regulation
Typ. Efficiency
No Load
Consumption
(VDC)
(A)
(A)
(W)
(mVp-p)
(%)
(%)
(W)
5.0
5.99
3.33
4.00
20
50
±5
80
0.3
1
HPU32A-103
6.0
8.0
2.87
3.83
23
60
±5
80
0.3
1
HPU32A-104
8.0
11.0
2.45
3.38
27
80
±5
81
0.3
1
HPU32A-105
11.0
13.0
2.30
2.74
30
100
±5
81
0.3
1
HPU32A-106
13.0
16.0
1.88
2.30
30
100
±5
83
0.3
1
HPU32A-107
16.0
21.0
1.43
1.88
30
100
±5
83
0.3
1
HPU32A-108
21.0
27.0
1.11
1.43
30
100
±3
85
0.3
1
HPU32A-109
27.0
33.0
0.91
1.11
30
100
±3
85
0.3
1
HPU32A-110
33.0
40.0
0.75
0.91
30
100
±3
86
0.3
1
HPU32A-111
40.0
48.0
0.63
0.75
30
100
±3
86
0.3
1
If modified, the regulation and efficiency will be affected
MODEL NO.
WWW.ASTRODYNETDI.COM
Output CurrentOutput Cord Length 48”, 16AWG
AHP3201x-02~04
(Based
on the output
volt.) Cord Length 72”, 18AWG
AHP3201x-05~11
Output
min
max
min
max
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Hold-Up Time
Maximum
Output Power
(VDC)
HPU32A-102
Voltage Range
(m
LOA
nominal line at rated load.
4. Load regulation is defined by changing ±40% of measured output load
from 60% rated load.
5. Ripple & noise is measured by using 20MHz bandwidth limited
oscilloscope and terminated each output with a 0.47uF capacitor at
rated load and nominal line.
6. Hold up time is measured from the end of the last charging pulse to the
time which the main output drops down to low limit of main output at
rated load and nominal line.
7. Efficiency is measured at rated load, and nominal line.
8. The specifics for testing the energy efficiency of this Series are outlined
in a separate document titled "Test Method for Calculating the Energy
Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power
Supplies (August 11, 2004)," which is available on the ENERGY STAR
DIMENSIONSWebsite.
- AHP3101B
70
60
50
80
120
140
160
180
200
220
INPUT VOLTAGE (VAC)
(FIG.1) INPUT VOLTAGE DERATING CURVE
2
110
100
AHP3201
90
30W Me d i c a l Gr ade S w i t c hi ng P ow er S up p lie s
MECHANICAL
100
80
70
series
60
50
40
30
Dimensions are In mm [inches].
20
10
0
-10
0
10
DC OUTPUT CONNECTIONS
MECHANICAL DIMENSIONS: ( UNIT: mm )
-Vout
20
30
40
50
TEMPERATURE (°C)
(FIG.2) TEMPERATURE DERATING CURVE
60
OUTPUT CABLE RECOMMEND :
+Vout
1. Selected
Coaxial
Plug: output connectors and wire, please refer to Ap
2. HPU32B-102~104 are required to use AWG#16 / 4FT out
5.5mm3.outer
diameter
HPU32B-105~111
are required to use AWG#18/ 6FT out
2.1mm4.inner
female
The diameter,
regulation
and efficiency will be changed by modifie
11mm length, center “+”
PACKING :
1. Net weight: 265~280g approx.
2. Optional output connectors available contact sales for d
Rating Chart:
Ripple & Noise
Total Regulation
Typ. Efficiency
No Load
Consumption
(VDC)
(A)
(A)
(W)
(mVp-p)
(%)
(%)
(W)
5.0
5.99
3.33
4.00
20
50
±5
80
0.3
1
HPU32B-103
6.0
8.0
2.87
3.83
23
60
±5
80
0.3
1
HPU32B-104
8.0
11.0
2.45
3.38
27
80
±5
81
0.3
1
HPU32B-105
11.0
13.0
2.30
2.74
30
100
±5
81
0.3
1
HPU32B-106
13.0
16.0
1.88
2.30
30
100
±5
83
0.3
1
HPU32B-107
16.0
21.0
1.43
1.88
30
100
±5
83
0.3
1
HPU32B-108
21.0
27.0
1.11
1.43
30
100
±3
85
0.3
1
HPU32B-109
27.0
33.0
0.91
1.11
30
100
±3
85
0.3
1
HPU32B-110
33.0
40.0
0.75
0.91
30
100
±3
86
0.3
1
HPU32B-111
40.0
48.0
0.63
0.75
30
100
±3
86
0.3
1
If modified, the regulation and efficiency will be affected
MODEL NO.
WWW.ASTRODYNETDI.COM
Output CurrentOutput Cord Length 48”, 16AWG
AHP3201x-02~04
(Based
on the output
volt.) Cord Length 72”, 18AWG
AHP3201x-05~11
Output
min
max
min
max
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Hold-Up Time
Maximum
Output Power
(VDC)
HPU32B-102
Voltage Range
(m
AHP3201
30W Me d i c a l Gr ade S w i t c hi ng P ow er S up p lie s
series
DERATE CURVES
30W External Medical Grade Power Supply
110
100
LOAD (%)
90
80
70
60
50
80
100
-10
0
120
140
160
180
200
220
INPUT VOLTAGE (VAC)
(FIG.1) INPUT VOLTAGE DERATING CURVE
240
260
280
110
100
90
80
70
60
50
40
30
20
10
0
10
20
30
40
50
TEMPERATURE (°C)
(FIG.2) TEMPERATURE DERATING CURVE
60
70
80
OUTPUT CABLE RECOMMEND :
1. Selected output connectors and wire, please refer to Appendix.
2. HPU32B-102~104 are required to use AWG#16 / 4FT output cable.
3. HPU32B-105~111 are required to use AWG#18/ 6FT output cable.
4. The regulation and efficiency will be changed by modified output cable.
PACKING :
1. Net weight: 265~280g approx.
2. Optional output connectors available contact sales for details.
(%)
3.83
(%)
(W)
(ms)
0.3
12
WWW.ASTRODYNETDI.COM
±5
23
60
80
20
50
±5
80
Protection Mode
Total Regulation
(mVp-p)
Hold-Up Time
Ripple & Noise
(W)
No Load
Consumption
Maximum
Output Power
(A)
4.00
Typ. Efficiency
max
ent
put volt.)
OLP
0.3
12
OLP
3.38
27
80
±5
81
0.3
12
OLP
2.74
30
100
±5
81
0.3
12
OLP
0615
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
Similar pages