Vishay CS20118D1C392MSP Capacitor networks, single-in-line,conformal coated sip, Datasheet

CS201
Vishay Dale
Capacitor Networks, Single-In-Line,
Conformal Coated SIP, "D" Profile
FEATURES
• X7R and COG capacitors available
Available
• Multiple isolated capacitors
e1
• Multiple capacitors, common ground
• Custom design capability
• “D” 0.300" [7.62 mm] package height (maximum)
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
DALE
MODEL
PROFILE
CS201
D
CS201
D
SCHEMATIC
CAPACITANCE
RANGE
CAPACITANCE
TOLERANCE
(- 55 °C to + 125 °C)
%
CAPACITOR
VOLTAGE
at 85 °C
VDC
COG (1)
X7R
1
33 pF - 3900 pF
470 pF - 0.1 µF
± 10 (K), ± 20 (M)
50 (5)
3
33 pF - 3900 pF
470 pF - 0.1 µF
± 10 (K), ± 20 (M)
50 (5)
CS201
D
4
33 pF - 3900 pF
Note
(1) COG capacitors may be substituted for X7R capacitors
470 pF - 0.1 µF
± 10 (K), ± 20 (M)
50 (5)
MECHANICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
PARAMETER
CS201
UNIT
Temperature Coefficient
(- 55 °C to +125 °C)
COG
ppm/°C
or
%
Dissipation Factor
(Maximum)
X7R
± 30
ppm/°C
±%
± 15 %
0.15
2.5
Marking Resistance
to Solvents
Permanency testing per MIL-STD202, Method 215
Solderability
Per MIL-STD-202, Method 208E
Body
High alumina, epoxy coated
(Flammability UL94 V-0)
Terminals
Phosphorus-bronze, solder plated
Marking
Pin #1 identifier, DALE or D, Part
number (abbreviated as space
allows), Date code
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: 20108D1C103K5P (preferred part numbering format)
2
0
1
0
GLOBAL
MODEL
PIN
COUNT
PACKAGE
HEIGHT
201 = CS201
04 = 4 Pin
08 = 8 Pin
18 = 18 Pin
D = “D”
Profile
8
D
1
C
1
SCHEMATIC CHARACTERISTIC
1
3
4
0 = Special
C = COG
X = X7R
S = Special
0
3
CAPACITANCE
VALUE
(in picofarads) 2
digit significant
figure, followed
by a multiplier
330 = 33 pF
392 = 3900 pF
104 = 0.1 µF
K
5
P
_
_
_
P
TOLERANCE
VOLTAGE
PACKAGING
SPECIAL
K = ± 10 %
M = ± 20 %
S = Special
5 = 50V
S = Special
E = Lead (Pb)-free,
Bulk
P = Tin/Lead, Bulk
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999 as
applicable
Historical Part Number example: CS20108D1C103K5 (will continue to be accepted)
CS201
08
D
1
C
103
K
5
P03
HISTORICAL
MODEL
PIN COUNT
PACKAGE
HEIGHT
SCHEMATIC
CHARACTERISTIC
CAPACITANCE VALUE
TOLERANCE
VOLTAGE
PACKAGING
www.vishay.com
1
For technical questions, contact: [email protected]
Document Number: 31522
Revision: 07-Aug-08
CS201
Capacitor Networks, Single-In-Line,
Conformal Coated SIP, "D" Profile
Vishay Dale
DIMENSIONS in inches [millimeters]
0.085 [2.160]
Typ.
L
Max.
0.050 [1.27]
Typ.
0.135 [3.43]
Max.
0.300
[7.62]
Seating Plane
for 0.040 [1.016] Ø Hole
0.010
[0.254]
0.020
[0.508]
0.050 [1.27]
0.100 ± 0.005 [2.54 ± 0.127]
Non-Cumulative
at Point of Egress
0.007 [0.178] Ref.
0.135 + 0.015 - 0.010
[3.43 + 0.381 - 0.254]
Pin #1 is extreme left-hand terminal on side with marking.
NUMBER
OF PINS
L
MAXIMUM
NUMBER
OF PINS
L
MAXIMUM
NUMBER
OF PINS
L
MAXIMUM
4 pin
0.400 [10.16]
9 pin
0.900 [22.86]
14 pin
1.400 [35.56]
5 pin
0.500 [12.70]
10 pin
1.000 [25.40]
15 pin
1.500 [38.10]
6 pin
0.600 [15.24]
11 pin
1.100 [27.94]
16 pin
1.600 [40.64]
7 pin
0.700 [17.78]
12 pin
1.200 [30.48]
17 pin
1.700 [43.18]
8 pin
0.800 [20.32]
13 pin
1.300 [33.02]
18 pin
1.800 [45.72]
SCHEMATICS
Schematic 1
1
2
3
4
5
6
Schematic 3
n-1
n
Common Bus - 1 Ground Lead
Document Number: 31522
Revision: 07-Aug-08
1
2
3
4
5
6
7
Schematic 4
8
n-1
n
Isolated Capacitor Sections
For technical questions, contact: [email protected]
1
2
3
4
n-1
n
Common Bus - 2 Ground Leads
www.vishay.com
2
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages