Wall ELANC4805UW6 Single and dual output Datasheet

TECHNICAL DATASHEET
Rev. D
ELANC SERIES
4:1 Input Voltage Ranges
Single and Dual Outputs
“Economy” Version of LANC Series
6 Watt DC/DC Power Converters
FEATURES
• 6 Watts
• Single and Dual Outputs
• 4:1 Wide Input Voltage Range
• Meets IEC/EN60950 and UL60950 Safety Standards
• RoHS Compliant
• High Efficiency up to 83%
• Industry Standard Footprint: 1.25” x 0.8” x 0.4”
• Low Output Ripple & Noise
• MTBF > 2,000,000 Hours
• Economy Version of the LANC Series
DESCRIPTION
The ELANC series of DC/DC power converters provides 6 watts of output power in an industry standard 1.25" x
0.80" x 0.40" package and footprint. This series has single and dual output models with 4:1 input voltage ranges
of 9-36VDC and 18-75VDC. Some features include high efficiency, low ripple and noise, and an MTBF >
2,000,000 hours. All models are RoHS compliant and meet IEC/EN60950 and UL60950 safety standards. The
ELANC series is the "Economy" version of the LANC series.
03/13/2013
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 1 of 4
ELANC Series
Single and Dual Outputs
6 Watt DC/DC Power Converters
“Economy” Version of the LANC Series
Rev. D
SPECIFICATIONS: ELANC SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
12VDC nominal input models
48VDC nominal input models
Input Voltage Range
OUTPUT SPECIFICATIONS
Output Voltage
Line Regulation
Single Output Models
Load Regulation
Dual Output Models
Voltage Setpoint Accuracy
Voltage Adjustment
Output Current
Output Power
Single Output Models
Ripple & Noise
Dual Output Models
Temperature Coefficient
DYNAMIC RESPONSE
Single Output Models
Load Step / ∆ V
Dual Output Models
Single Output Models
Recovery Time
Dual Output Models
ISOLATION VOLTAGE
Single Output Models
Input to Output
Dual Output Models
Single Output Models
Input to Case
Dual Output Models
Single Output Models
Output to Case
Dual Output Models
GENERAL SPECIFICATIONS
Efficiency
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature Range
Operating Board Temperature Range
Storage Temperature Range
MTBF
PHYSICAL SPECIFICATIONS
Min
Nom
Max
Unit
9
18
12
48
36
75
VDC
-3.0
20MHz Bandwidth
-0.02
See Table
0.5
1.0
2.0
+3.0
none
See Table
See Table
60
0.5
+0.02
%Vo
%Vo
%Vo
mVp-p
%Vo
%/°C
200
5%
200
< 300
50%~75%~50% Io, di/dt=1A/10µS
mV
Vo
µS
µS
500
1500
500
1500
500
1500
For 1 minute
For 1 minute
For 1 minute
VDC
VDC
VDC
See Table
-40
-40
-55
+85
+100
+125
> 2,000,000 hours
°C
°C
°C
1.25 x 0.8 x 0.4 inches
(31.80 x 20.30 x 10.16 mm)
Dimensions (L x W x H)
SAFETY
Safety Approvals
IEC/EN60950, UL60950
*Due to advances in technology, specifications subject to change without notice.
03/13/2013
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 4
ELANC Series
Single and Dual Outputs
6 Watt DC/DC Power Converters
“Economy” Version of the LANC Series
Rev. D
MODEL SELECTION TABLES
SINGLE OUTPUT MODELS
Model
Input Voltage
ELANC1233UW6
Output Voltage
Output Current
Output Power
Efficiency
3.3 VDC
2A
6.6W
78%
ELANC1205UW6
12 VDC
5 VDC
1.2 A
6W
80%
ELANC1212UW6
(9 – 36 VDC)
12 VDC
0.5 A
6W
82%
ELANC1215UW6
15 VDC
0.4 A
6W
82%
ELANC4833UW5
3.3 VDC
1.5 A
5W
76%
ELANC4805UW6
48 VDC
5 VDC
1.2 A
6W
80%
ELANC4812UW6
(18 – 75 VDC)
12 VDC
0.5 A
6W
82%
15 VDC
0.4 A
6W
83%
ELANC4815UW6
DUAL OUTPUT MODELS
Model
ELANC1205DUW6
ELANC1212DUW6
ELANC1215DUW6
ELANC4805DUW6
ELANC4812DUW6
ELANC4815DUW6
Input Voltage
12 VDC
(9 – 36 VDC)
48 VDC
(18 – 75 VDC)
Output Voltage
Output Current
Output Power
Efficiency
±5 VDC
±0.6 A
6W
80%
±12 VDC
±0.25 A
6W
82%
±15 VDC
±0.2 A
6W
83%
±5 VDC
±0.6 A
6W
81%
±12 VDC
±0.25 A
6W
82%
±15 VDC
±0.2 A
6W
82%
MECHANICAL DRAWING
Pin
2
3
9
11
14
16
22
23
03/13/2013
PIN CONNECTIONS
Single
Dual
-Vin
-Vin
-Vin
-Vin
No Pin
COM
No Connect
-Vo
+Vo
+Vo
-Vo
COM
+Vin
+Vin
+Vin
+Vin
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 3 of 4
Rev. D
ELANC Series
Single and Dual Outputs
6 Watt DC/DC Power Converters
“Economy” Version of the LANC Series
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to
provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss
your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
03/13/2013
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. 37 Industrial Drive Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 4 of 4
Similar pages