[ Obsolete product ] Agilent has a new name Keysight Technologies. Keysight Technologies Inc. is the world's leading electronic measurement company, transforming today's measurement experience through innovations in wireless, modular, and software solutions. With its HP and Agilent legacy, Keysight delivers solutions in wireless communications, aerospace and defense and semiconductor markets with world-class platforms, software and consistent measurement science. Alldatasheet.com Agilent E36XX-Series Manual dc Power Supplies Data Sheet • Linear power supply • Single, dual or triple output • 10-turn voltage and current controls • Digital voltage and current meters • Low noise and excellent regulation Affordable, full-featured benchtop power supplies provide excellent performance and flexibility A whole family of low-cost power supplies to meet your needs The E3600-series of low-cost benchtop power supplies give you the performance of system power supplies without the high price. All E3600 family members give you clean power with dependable regulation and fast transient response. E3600-series single-output models are described on this page. See page 2 for information on dual- and triple-output models. Single-output models All E3600-series single-output power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models except the E3630A also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings. With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur. The low normal-mode noise specification of less than 200µVrms ensures clean power for precision circuitry. These instruments also feature adjustable current limits, letting you set the safest current limit without having to short the output. E3610A, E3611A, and E3612A single-output models These popular 30-watt bench supplies are designed for general laboratory use. The constant-voltage, constantcurrent output allows operation as either a voltage or current source. The changeover occurs automatically, based on the load. Each of these models has two ranges, allowing more current at a lower voltage. For higher output voltages, supplies can be connected in series. In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240V from ground. Agilent Technologies E3614A, E3615A, E3616A and E3617A models feature overvoltage protection These flexible 60-watt, single-range power supplies can be used as either voltage or current sources. When output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) from damage. The overvoltage protection feature is easily monitored and adjusted from the front panel. Using remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you get accurate voltage at the DUT. You can combine multiple units in auto-parallel, auto-series and autotracking configurations for greater output voltage or current capacity. Front and rear output terminals allow flexible configuration. Output voltage and current can be controlled with external 0- to10-volt analog voltage or variable resistance. Multi-output models E3620A dual-output power supply With multiple supplies in a compact unit, the E3620A and E3630A give you excellent performance while saving space on your bench. Both instruments feature tight 0.01 percent line and load regulation and a low normal-mode noise specification of less than 0.35mV to ensure clean power for precision circuitry. With a common-mode current specification of less than 1uA, both multiple-output power supplies minimize power line current injection. The 50-watt E3620A dual-output power supply provides two 0 V to 25 Vdc outputs with the maximum current of 1 A to satisfy most bench requirements. The outputs are completely independent and isolated. Like the single-output models in the E3600 series, the E3620A and E3630A feature separate digital panel meters so you can monitor voltage and current simultaneously. They also protect your DUT against overload and short-circuit damage. Smooth turn-on and turn-off transitions keep power spikes out of your circuits. E3630A triple-output power supply The 35-watt E3630A triple- output power supply provides three dc outputs: 0 to 6 V with a maximum current of 1 to 2.5A and 0 to 20 V and 0 to -20 V with a maximum current of 0.5A. An autotracking feature lets you use one voltage control to adjust the +20 V and -20 V outputs simultaneously. The outputs track each other to within 1 percent, making it easy to adjust the power supply for circuits requiring balanced voltages. 2 Specifications E3610A Features E3611A E3612A Dual range, 10 turn pots, Constant Voltage (CV), Constant Current (CC) modes. E3614A E3615A Number of outputs E3617A E3620A E3630A Isolated dual outputs, 10 turn pots CV, CL Tracking, CV, CL (±20 V) CV, CF (+6 V) 2 3 1 Number of output Ranges dc Output Rating E3616A Adjustable overvoltage protection, voltage & resistance programming, remote sense, rear outputs, ten turn pots, CV, CC modes. Multiple supplies can be connected for tracking or higher power. 2 2 2 1 1 1 1 1 1 8 V, 3 A 15 V, 2 A 20 V, 1.5 A 35 V, 0.85 A 60 V, 0.5 A 120 V, 0.25 A 8 V, 6 A 20 V, 3 A 35 V, 1.7 A 60 V, 1 A 25 V, 1 A 25 V, 1 A +6 V, 2.5 A +20 V, 0.5 A -20 V, 0.5 A Load and Line Regulation <0.01% + 2 mV Ripple and Noise (20 Hz to 20 MHz) Normal mode voltage <200 µVrms, <2 mVpp Normal mode current <200 µVrms / 1 mApp <200 µVrms, <1 mVpp <0.02%+ 3 mA Common mode current <0.02%+ 1.5 mA <0.02%+ 1 mA <350 µVrms, <1.5 mVpp <0.02%+ 0.5 mA – not specified Transient Response Time: <1 µArms <50 µsec following change in output current from full load to half load for output to recover to within: 10 mV 15 mV Meter Accuracy ±0.5% + 2 counts at 25°C ±5°C Meter Resolution Voltage 10 mV 100 mV 100 mV 10 mV Current 10 mA 10 mA 1 mA 10 mA 10 mV (0-20 V), 100 mV (>20 V) 10 mA Isolation 1 mA 1 mA 10 mA 1 mA 10 mA CV/CL CV/CL (±20 V) CV/CF (+6 V) 240 Vdc Supplemental Characteristics Control Mode CV/CC Temperature Coefficient per °C Voltage <0.02% + 1 mV Current <0.02% + 2 mA <0.02% + 500 µV <0.02% + 3 mA <0.02% + 1.5 mA <0.02% + 1 mA <0.02% + 1 mV <0.02% + 0.5 mA – Output Drift Voltage Less than 0.1% + 5 mV total drift for 8 hours after an initial warm-up of 30 minutes. Current Less than 0.1% + 10 mA total drift for 8 hours after an initial warm-up of 30 minutes. Temperature Range 0 to 40°C for full rated output. Derate output current 1% per °C between 40°C and 55°C Cooling Convection cooling Isolation ±240 Vdc AC Input 100 Vac ±10%, 47– 63 Hz (opt. 0E9) 115 Vac ±10%, 47– 63 Hz (std) 230 Vac ±10%, 47– 63 Hz (opt. 0E3) Weight Size Warranty Product Regulation 3 Derate output current 3.3% per °C 3.8 kg (8.4 lb.) net, 5.1 kg (11.3 lbs) shipping 5.5 kg (12.1 lb.) net, 6.75 kg (14.9 lbs) shipping 91 mm H x 213 mm W x 319 mm D 3.6” H x 8.4” W x 12.6” D 91 mm H x 213 mm W x 373 mm D 3.6” H x 8.4” W x 14.7” D Same as 1 year Certified to CSA 22.2 No. 231; conforms to IEC 1010-1; carries CE mark; complies with CISPR-11, Group 1, Class A E3610A www.agilent.com Ordering Information E3600-Series Power Supplies E3610A 30-Watt Power Supply E3611A 30-Watt Power Supply E3612A 30-Watt Power Supply E3614A 48-Watt Power Supply E3615A 60-Watt Power Supply E3616A 60-Watt Power Supply E3617A 60-Watt Power Supply E3620A Dual-output Power Supply E3630A Triple-output Power Supply Accessories included Operating and service manuals and AC power cord Power Options Opt. 0E3 230 Vac ±10% Opt. 0EM 115 Vac ±10% Opt. 0E9 100 Vac ±10% Other Options Opt. 1CM Rack-mount kit* (E3614A, E3615A, E3616A, E3617A, E3620A) Opt. 0L2 Extra Manual Extra manual sets E3610A/11A/12A Manual (P/N 5959-5304) E3614A/15A/16A /17A Manual (P/N 5959-5310) E3620A Manual (P/N E3620-90001) E3630A Manual (P/N 5959-5329) Rack Mount Kits* E3610A/11A/12A/30A (P/N 5063-9767) E3614A/15A/16A/17A/20A To rack mount instruments side by side Lock-link Kit (P/N 5061-9694) Flange Kit (P/N 5063-9212) To rack mount one or two instruments in a sliding support shelf Support Shelf (P/N 5063-9255) Slide Kit (P/N 1494-0015) required for support shelf For a single instrument, also order filler panel (P/N 5002-3999) Rackmounting with 1CM or lock-link/flange kit requires * Agilent or customer supplied support rails Agilent Support Rails - E3663AC Agilent Technologies’ Test and Measurement Support, Services, and Assistance Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty. Support is available for at least five years beyond the production life of the product. Two concepts underlie Agilent’s overall support policy: “Our Promise” and “Your Advantage.” By internet, phone, or fax, get assistance with all your test & measurement needs Our Promise Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you use Agilent equipment, we can verify that it works properly, help with product operation, and provide basic measurement assistance for the use of specified capabilities, at no extra cost upon request. Many self-help tools are available. Europe: (tel) (31 20) 547 2323 (fax) (31 20) 547 2390 Your Advantage Your Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-ofwarranty repairs, and on-site education and training, as well as design, system integration, project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, optimize the return on investment of your Agilent instruments and systems, and obtain dependable measurement accuracy for the life of those products. Online assistance: www.agilent.com/find/assist Phone or Fax United States: (tel) 1 800 829 4444 Canada: (tel) 1 877 894 4414 (fax) (905) 282 6495 China: (tel) 800 810 0189 (fax) 800 820 2816 Japan: (tel) (81) 426 56 7832 (fax) (81) 426 56 7840 Korea: (tel) (82 2) 2004 5004 (fax) (82 2) 2004 5115 Latin America: (tel) (305) 269 7500 (fax) (305) 269 7599 Taiwan: (tel) 0800 047 866 (fax) 0800 286 331 Other Asia Pacific Countries: (tel) (65) 6375 8100 (fax) (65) 6836 0252 Email: [email protected] Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2002 Printed in USA May 1, 2004 5968-9727EN Agilent Email Updates www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. Agilent T&M Software and Connectivity Agilent’s Test and Measurement software and connectivity products, solutions and developer network allows you to take time out of connecting your instruments to your computer with tools based on PC standards, so you can focus on your tasks, not on your connections. Visit www.agilent.com/find/connectivity for more information. Agilent Technologies