T-3 Special Service Halogen Lamp T-3 Special Service Halogen Lamp CONFIGURATION .497 .500 MAX. .497 .500 MAX. .836 MAX. .285 LC L .901 ..2 85 LC L .2 50 .2 47 S E E COMME NTS S E C T I ON S E E COMME NTS S E C T I ON A B All dimensions in inches. Description: These industry standard Halogen Lamps are used in a variety of applications from Aircraft Navigation lights to Medical work lights. The unique compact design, rugged construction and exceptionally high light output make these lamps the ideal light source for many applications. Part No. CM1974 CM1974D CM1962 CM1962B CM1962DZ CM1962DX CM1962TY Design Volts 6.0 6.0 8.5 8.5 8.5 8.5 8.5 Materials: Globe: Base: Lead Connections: Lead Wires: Atmosphere: Design Watts 20 20 62 62 62 62 62 Filament Shape C-6 C-6 C-6 C-6 C-6 C-6 C-6 Nominal MSCP Laboratory Configuration Life Hours 10 10000 B 10 10000 A 110 50 B 110 50 B 80 150 A 80 150 A 110 50 B Comments 3" Bare Leads 3" Bare Leads 3" Bare Leads 9" Teflon Insulated 12" Teflon Insulated 4" Bare Leads 4" Teflon Insulated Quartz Glass Brass Special Bayonet Brazed 18 AWG Bare or Teflon Insulated Gas Caution: These halogen cycle lamps may shatter if scratched or damaged. Use these lamps in fixtures designed for their high operating temperature. Always turn power off when changing these lamps. For satisfactory performance limit the seal and wire lead temperature to 350°C to avoid deterioration. Maintain a minimum lamp wall temperature of 250°C to assure the halogen cycle occurs. Remove all grease and fingerprints from these lamps before operation. Never exceed the design voltage of these lamps. America: CML Innovative Technologies,Inc. 147 Central Avenue Hackensack -NJ 07601 -USA Tel:1-201-489 -8989 Fax:1-201-489 -6911 e-mail:[email protected] Europe: CML Technologies GmbH &Co.KG Robert-Bunsen-Str.1 67098 Bad Dürkheim -GERMANY Tel:+49 (0)6322 9567-0 Fax:+49 (0)6322 9567-88 e-mail:[email protected] Asia: CML Innovative Technologies,Inc. 61 Aida Street Singapore 459975 Tel:(65)9630 -5003 e-mail:[email protected] CML-IT reserves the right to make specification revisions that enhance the design and/or performance of the product