BZT52-C2V4-AU SERIES SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volts POWER 410 mWatts FEATURES 0.154(3.90) 0.141(3.60) • Planar Die construction 0.110(2.80) 0.098(2.50) • 410mW Power Dissipation • Zener Voltages from 2.4~75V • Ideally Suited for Automated Assembly Processes 0.028(0.70) 0.019(0.50) • Acqire quality system certificate : TS16949 0.071(1.80) 0.055(1.40) • AEC-Q101 qualified • Lead free in comply with EU RoHS 2011/65/EU directives. • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.008(0.20)MAX. MECHANICAL DATA • Case: SOD-123, Molded Plastic 0.053(1.35) 0.037(0.95) 0.016(0.40)MIN. 0.005(0.12)MAX. • Terminals: Solderable per MIL-STD-750, Method 2026 • Polarity: See Diagram Below • Approx. Weight: 0.0004 ounces, 0.01 grams • Mounting Position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL VALUE UNITS Maximum Power Dissipation (Note A) at 25oC PD 410 mW Operating Junction Temperature and StorageTemperature Range TJ -55 to +150 C O NOTES: A. Mounted on 5.0mm2(.013mm thick) land areas. 1 C a th o d e October 06,2011-REV.02 2 A node PAGE . 1 BZT52-C2V4-AU SERIES Nominal Zener Voltage Part Number V Z @ IZT No m. V Mi n. V Max Reverse Leakage Current Max. Zener Impedance Z ZT @ I ZT Z ZK @ I ZK IR @ V R Ma x. V Ω mA Ω mA μA V Marking Code 410 mWatts Zener Diodes BZT52-C2V4-AU 2.4 2.28 2.52 85 5.0 600 1.00 100 1.0 W1 BZT52-C2V7-AU 2.7 2.57 2.84 83 5.0 600 1.00 75 1.0 W2 BZT52-C3-AU 3.0 2.85 3.15 95 5.0 600 1.00 50 1.0 W3 BZT52-C3V3-AU 3.3 3.14 3.47 95 5.0 600 1.00 25 1.0 W4 BZT52-C3V6-AU 3.6 3.42 3.78 95 5.0 600 1.00 15 1.0 W5 BZT52-C3V9-AU 3.9 3.71 4.10 95 5.0 600 1.00 10 1.0 W6 BZT52-C4V3-AU 4.3 4.09 4.52 95 5.0 600 1.00 5.0 1.0 W7 BZT52-C4V7-AU 4.7 4.47 4.94 78 5.0 500 1.00 5.0 1.0 W8 BZT52-C5V1-AU 5.1 4.85 5.36 60 5.0 480 1.00 0.1 0.8 W9 BZT52-C5V6-AU 5.6 5.32 5.88 40 5.0 400 1.00 0.1 1.0 WA BZT52-C6V2-AU 6.2 5.89 6.51 10 5.0 150 1.00 0.1 2.0 WB BZT52-C6V8-AU 6.8 6.46 7.14 8 5.0 80 1.00 0.1 3.0 WC BZT52-C7V5-AU 7.5 7.13 7.88 7 5.0 80 1.00 0.1 5.0 WD BZT52-C8V2-AU 8.2 7.79 8.61 7 5.0 80 1.00 0.1 6.0 WE BZT52-C8V7-AU 8.7 8.27 9.14 7 5.0 100 1.00 0.1 6.5 87C BZT52-C9V1-AU 9.1 8.65 9.56 10 5.0 100 1.00 0.1 7.0 WF BZT52-C10-AU 10 9.50 10.50 15 5.0 150 1.00 0.1 7.5 WG BZT52-C11-AU 11 10.45 11.55 20 5.0 150 1.00 0.1 8.5 WH BZT52-C12-AU 12 11.40 12.60 20 5.0 150 1.00 0.1 9.0 WI BZT52-C13-AU 13 12.35 13.65 25 5.0 170 1.00 0.1 10.0 WK BZT52-C14-AU 14 13.30 14.70 25 5.0 170 1.00 0.1 10.5 WJ BZT52-C15-AU 15 14.25 15.75 30 5.0 200 1.00 0.1 11.0 WL BZT52-C16-AU 16 15.20 16.80 40 5.0 200 1.00 0.1 12.0 WM BZT52-C17-AU 17 16.15 17.85 40 5.0 200 1.00 0.1 13.0 17C BZT52-C18-AU 18 17.10 18.90 50 5.0 225 1.00 0.1 14.0 WN BZT52-C20-AU 20 19.00 21.00 50 5.0 225 1.00 0.1 15.0 WO BZT52-C22-AU 22 20.90 23.10 55 5.0 250 1.00 0.1 17.0 WP BZT52-C24-AU 24 22.80 25.20 80 5.0 250 1.00 0.1 18.0 WR BZT52-C27-AU 27 25.65 28.35 80 5.0 300 1.00 0.1 20.0 WS BZT52-C28-AU 28 26.60 29.40 80 5.0 300 1.00 0.1 22.0 28C BZT52-C30-AU 30 28.50 31.50 80 5.0 300 1.00 0.1 22.5 WT BZT52-C33-AU 33 31.35 34.65 80 5.0 325 1.00 0.1 25.0 WU BZT52-C36-AU 36 34.20 37.80 90 5.0 350 1.00 0.1 27.0 WW BZT52-C39-AU 39 37.05 40.95 90 5.0 350 1.00 0.1 29.0 WX BZT52-C43-AU 43 40.85 45.15 100 5.0 375 1.00 0.1 32.0 WY BZT52-C47-AU 47 44.65 49.35 100 5.0 375 1.00 0.1 35.0 WZ BZT52-C51-AU 51 48.45 53.55 100 5.0 400 1.00 0.1 38.0 XA BZT52-C56-AU 56 53.20 58.80 135 2.5 1000 1.00 0.1 42.0 X2 BZT52-C62-AU 62 58.90 65.10 150 2.5 1000 1.00 0.1 46.0 X3 BZT52-C68-AU 68 64.60 71.40 200 2.5 1000 1.00 0.1 51.0 X4 BZT52-C75-AU 75 71.25 78.75 250 2.5 1000 1.00 0.1 56.0 X5 October 06,2011-REV.02 PAGE . 2 POWER DISSIPATION, Watts 0.6 0.5 O T A =25 C 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 TEMPERATURE COEFFICIENT,(mV/ OC) BZT52-C2V4-AU SERIES 100 10 1 10 100 NOMINAL ZENER VOLTAGE,VOLTS TEMPERATURE ( OC) Fig.2 TEMPERATURE COEFFICENTS Fig.1 STEADY STATE POWER DERATING 1000 100 FORWARD CURRENT,mA LEAKAGE CURRENT,uA 1000 10 1 O +150 C 0.1 0.01 O 0.001 +25 C 0.0001 -55 C O 0.00001 0 10 20 30 40 50 60 70 80 NORMAL ZENER VOLTAGE, VOLTS Fig.3 TYPICAL LEAKAGE CURRENT October 06,2011-REV.02 90 100 150OC 10 O 75 C 25OC 1 0.4 0.5 0.6 0.7 5OC 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE, VOLTS Fig.4 TYPICAL FORWARD VOLTAGE PAGE . 3 BZT52-C2V4-AU SERIES MOUNTING PAD LAYOUT SOD-123 Unit: inch(mm) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel October 06,2011-REV.02 PAGE . 4 BZT52-C2V4-AU SERIES Part No_packing code_Version BZT52-C2V4-AU_R1_000A1 BZT52-C2V4-AU_R2_000A1 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Packing type means T/R Part No. Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING October 06,2011-REV.02 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 BZT52-C2V4-AU SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 06,2011-REV.02 PAGE . 6