D, DT Series C A L I B E R Lead-Free RoHS Compliant 4 Pin Plastic SMD Microprocessor Crystals PART NUMBERING GUIDE Electronics Inc. Environmental/Mechanical Specifications on page F5 DT A 32 C 1 - 30.000MHz Package DT=4 Pad Plastic SMD D=4 Pad Plastic SMD (MG3A Equivalent) Tolerance/Stability A=±50/100 B=±50/50 C=±30/50 D=±30/30 Mode of Operation 1=Fundamental 3=Third Overtone Operating Temperature Range C=0°C to 70°C E=-20°C to 70°C F=-40°C to 85°C Load Capacitance S=Series, XX=XXpF (Pico Farads) ELECTRICAL SPECIFICATIONS Revision: 1994-B Frequency Range 3.579545MHz to 70.000MHz Frequency Tolerance/Stability A, B, C, D See above for details! Other Combinations Available. Contact Factory for Custom Specifications. Operating Temperature Range “C” Option, “E” Option, “F” Option 0°C to 70°C, -20°C to 70°C (D Series Only), -40°C to 85°C (D Series Only) Aging @ 25°C ±5ppm / year Maximum Storage Temperature Range -55°C to 125°C Load Capacitance “S” Option “XX” Option Series 8pF to 50pF Shunt Capacitance 7pF Maximum Insulation Resistance 500 Megaohms Minimum at 100Vdc Drive Level 1mW Maximum, 100uW correlation EQUIVALENT SERIES RESISTANCE (ESR) Frequency (MHz) ESR (ohms) 3.579545 to 3.999 200 4.000 to 4.999 150 5.000 to 6.999 120 7.000 to 8.999 80 MARKING GUIDE Line 1: Line 2: Line 3: Line 4: Caliber Part Number Frequency Date Code Frequency (MHz) ESR (ohms) 10.000 to 12.999 60 13.000 to 19.999 35 20.000 to 30.000 25 30.000 to 70.000 100 MECHANICAL DIMENSIONS “D” Series “DT” Series D Series are marked “Frequency/Date Code”. DT Series are marked “Frequency/Date Code”. 1.20 ±0.50 (X4) 1.20 ±0.50 (X4) 1 1.60±0.127 (X2) 13.20 MAX TEL 949-366-8700 2.000±0.127 (X4) 9.40 ±0.127 2 3.00 ±0.127 (X2) 5.08 MAX 4 5.08 MAX 3 All Dimensions in mm. FAX 949-366-8707 4 2 3 9.40 ±0.127 12.80 MAX 4.30 MAX 1 5.08 MAX All Dimensions in mm. WEB http://www.caliberelectronics.com