Taychipst EGP10K Glass passivated high efficient plastic rectifier Datasheet

EGP10A THRU EGP10M
50V-1000V 1.0A
Glass Passivated High Efficient Plastic Rectifiers
FEATURES
• Superectifier structure for high reliability condition
• Cavity-free glass-passivated junction
• Ultrafast reverse recovery time
• Low forward voltage drop
• Low leakage current
• Low switching losses, high efficiency
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
MECHANICAL DATA
Case: DO-204AL, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Symbol EGP EGP EGP
Type Number
10A 10B 10D
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200
Maximum RMS Voltage
VRMS 35 70 140
Maximum DC Blocking Voltage
VDC 50 100 200
EGP EGP EGP EGP EGP Units
10F 10G 10J 10K 10M
300 400 600 800 1000
210 280 420 560 700
300 400 600 800 1000
V
V
V
Maximum Average Forward Rectified
Current .375” (9.5mm) Lead Length
@TA = 55℃
I(AV)
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
IFSM
30.0
A
Maximum Instantaneous Forward Voltage
@ 1.0A
VF
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=125℃
IR
Maximum Reverse Recovery Time ( Note 1 )
TJ=25℃
Trr
Typical Junction Capacitance ( Note 2 )
Typical Thermal Resistance (Note 3)
Operating Temperature Range
Cj
RθJA
0.95
1.25
5.0
100.0
75
20
15
70
-65 to + 150
-65 to + 150
TJ
TSTG
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Cu-Pad Size 5mm x 5mm on P.C.B.
1 of 2
V
uA
uA
50
Storage Temperature Range
E-mail: [email protected]
1.7
nS
pF
°C/W
°C
°C
Web Site: www.taychipst.com
EGP10A THRU EGP10M
50V-1000V 1.0A
Glass Passivated High Efficient Plastic Rectifiers
RATINGS AND CHARACTERISTICS CURVES
EGP10A THRU EGP10M
30
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
1.0
0.5
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
25
20
15
10
5
0
0
0
25
50
75
100
125
150
1
175
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
1000
Pulse Width = 300 μs
1 % Duty Cycle
Instantaneous Reverse Leakage
Current (μA)
Instantaneous Forward Current (A)
100
Number of Cycles at 60 Hz
100
TJ = 150 °C
10
1
TJ = 25 °C
0.1
EGP10A thru EGP10D
EGP10F and EGP10G
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
100
TJ = 150 °C
10
TJ = 100 °C
1
0.1
TJ = 25 °C
0.01
0
1.8
20
40
60
80
100
Instantaneous Forward Voltage (V)
Percent of Rated Peak Reverse Voltage (%)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 4 - Typical Reverse Leakage Characteristics
100
Transient Thermal Impedance (°C/W)
70
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
60
Junction Capacitance (pF)
10
Lead Temperature (°C)
50
40
30
20
10
EGP10A thru EGP10D
EGP10F and EGP10G
0
0.1
1
10
10
1
0.1
0.01
100
0.1
1
10
100
Reverse Voltage (V)
t - Pulse Duration (s)
Fig. 5 - Typical Junction Capacitance
Fig. 6 - Typical Transient Thermal Impedance
E-mail: [email protected]
2 of 2
Web Site: www.taychipst.com
Similar pages