Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type Series : CY, SY (Guaranteed at 85 °C) Features ● Endurance 85 °C 2000 h height (3.0 mm max.) ● High ripple current (5100 mAr.m.s. to 6300 mAr.m.s. max.) ● RoHS compliance, Halogen free ● Product Specifications Series CY / SY Category temp. range –55 °C to +85 °C Rated voltage range 4 V.DC, 6.3 V.DC Nominal cap.range 330 μF to 470 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) DC leakage current I < 0.1 CV (μA) [4 V.DC, 6.3 V.DC, 2 minutes] Dissipation factor (tan d) < 0.06 (120 Hz / + 20 °C) Rated voltage × 1.25 [4 V.DC, 6.3 V.DC] (15 °C to 35 °C) Surge voltage (V.DC) +85 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 2 times of the initial limit DC leakage current < 3 times of the initial limit +60 °C, 90 %, 500 h, No-applied voltage 4 V.DC Capacitance change of initial measurd value +60 %, –20 % tan d < 2 times of the initial limit Damp heat (Steady state) 6.3 V.DC +50 %, –20 % DC leakage current Within the initial limit Marking Dimensions (not to scale) – + H Cap. Polarity bar (Positive) P P L Lot No. W2 W2 W1 R.V. code Unit : mm Rated voltage mark g j 4 V.DC 6.3 V.DC Series CY/SY L±0.2 W1±0.2 W2±0.1 H±0.2 7.3 4.3 2.4 2.8 P±0.3 1.3 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2017 Conductive Polymer Aluminum Electrolytic Capacitors Characteristics list Reflow ✽3 Case size (mm) Series CY SY Rated Capacitance voltage (±20 %) (V.DC) (μF) <Standard> Specification ✽1 L W H Part number Min.✽4 Packaging Q’ty (pcs) ✽2 Ripple ESR current (mAr.m.s.) (mΩ max.) 5100 15 4 470 7.3 4.3 2.8 ECGCY0G471R 2000 6.3 330 7.3 4.3 2.8 5100 15 ECGCY0J331R 2000 4 470 7.3 4.3 2.8 6300 9 ECGSY0G471R 2000 6.3 330 7.3 4.3 2.8 6300 9 ECGSY0J331R 2000 ✽1: Ripple current (100 kHz/ +45°C ) ✽2: ESR (100 kHz/+20 °C) ✽3: Please refer to the page of “Mounting Specifications”. ✽4: Please contact us when 500 pcs packing is necessary. Temperature compensation multipliers for ripple current Temp. T < 45 °C 45 °C < T < 65 °C 65 °C < T < 85 °C Coefficient 1.0 0.7 0.25 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Jul. 2017