BAS40-00-G to BAS40-06-G www.vishay.com Vishay Semiconductors Small Signal Schottky Diodes, Single and Dual FEATURES • These diodes feature very low turn-on voltage and fast switching • These devices are protected by a PN junction guardring against excessive voltage, such as electrostatic discharges • AEC-Q101 qualified • Base P/N-G3 - green, commercial grade BAS40-00-G BAS40-04-G 3 3 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: SOT-23 Top View Weight: approx. 8.1 mg 1 2 1 2 BAS40-05-G BAS40-06-G 3 3 Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box Top View 1 1 2 2 PARTS TABLE PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING BAS40-00-G BAS40-00-G3-08 or BAS40-00-G3-18 Single diode 43G BAS40-04-G BAS40-04-G3-08 or BAS40-04-G3-18 Dual diodes serial 44G BAS40-05-G BAS40-05-G3-08 or BAS40-05-G3-18 Dual diodes common cathode 45G BAS40-06-G BAS40-06-G3-08 or BAS40-06-G3-18 Dual diodes common anode 46G REMARKS Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE Repetitive peak reverse voltage TEST CONDITION VRRM = VRWM = VR 40 V Forward continuous current (1) IF 200 mA IFSM 600 mA Ptot 200 mW Surge forward current (1) Power dissipation tp < 1 s (1) UNIT Note (1) Device on fiberglass substrate, see layout on next page. THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE UNIT RthJA 500 K/W Tj 125 °C Storage temperature range Tstg - 65 to + 150 °C Operating temperature range Top - 55 to + 125 °C Thermal resistance junction to ambient air TEST CONDITION (1) Junction temperature Note (1) Device on fiberglass substrate, see layout on next page. Rev. 1.0, 25-Feb-13 Document Number: 85156 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAS40-00-G to BAS40-06-G www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. Reverse breakdown voltage IR = 10 μA (pulsed) V(BR) 40 VR = 30 V IR Leakage current Forward voltage MAX. UNIT 20 100 nA V IF = 1 mA VF 380 mV IF = 40 mA VF 1000 mV VR = 0 V, f = 1 MHz CD 5 pF IF = IR = 10 mA, iR = 1 mA, RL = 100 trr 5 ns Forward voltage (1) Diode capacitance Reverse recovery time TYP. 4 Note (1) Pulse test t < 300 μs p LAYOUT FOR RthJA TEST Thickness: Fiberglass 1.5 mm (0.059 inches) Copper leads 0.3 mm (0.012 inches) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.0, 25-Feb-13 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Document Number: 85156 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000