EPCOS B44066M1303E230 Grid analysis tool Datasheet

Film Capacitors – Power Factor Correction
Grid analysis tool
Series/Type:
Ordering code:
MC7000-3
B44066M7777E230
Date:
Version:
March 2010
1
entered in headers and footers! Please fill in the
Identification/Classification 1
(header 1 + top left bar):
Film Capacitors – Power Factor Correction
Identification/Classification 2
(header 2 + bottom left header bar):
Grid analysis tool
Ordering code: (top right header bar)
B44066M7777E230
Series/Type: (top right header bar)
MC7000-3
Preliminary data (optional):
(if necessary)
Department:
FK PC PM PFC
Date:
March 2010
Version:
1
 EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
Film Capacitors – Power Factor Correction
Grid analysis tool
B44066M7777E230
MC7000-3
Characteristics
 Three-phase measuring, display and storage of numerous electric parameters in LV-grid:














Voltage (3-phase)
Current (3-phase)
Frequency (3-phase)
Active power (3-phase)
Reactive power (3-phase)
Apparent power (3-phase)
Power factor (3-phase)
Active, reactive and apparent energy
Voltage harmonics (up to 51st)
Current harmonics (up to 51st)
THD-V (3-phase)
THD-I (3-phase)
Temperature
Minimum and maximum values with time stamp
 Display and internal storage of maximum values with time stamp
 Display of date and time
 Display of harmonics, bar diagram available
 Large number of display options e.g. rotating display and adjustment of font size
 Oscilloscope mode for graphical display of a complete oscillation incl. the harmonics
 Display of measured values (display editor) and rotating change of selected display values freely
programmable
 Storage of all measured grid parameters on pluggable memory card (SD card), included in
delivery
 Adjustment of font size to large display (max. 3 measuring values in the display)
 Plain-text menu in English, German, Russian, Spanish and Turkish
FK PC PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 7
Film Capacitors – Power Factor Correction
Grid analysis tool
B44066M7777E230
MC7000-3
 PC-Windows software for fast and easy evaluation of measured data included in delivery
 Administration of several projects
 Graphical display
 Several pre-configured graphical displays of standard values
 Graphical display of selected grid values, large number of configuration options
 Convenient editing of parameters and time interval
 Display as line graph or bar diagram
 Copy into clipboard and print function available
 Mathematical evaluation of measured values
 Automatic calculation of required kvar (target-cos  to be set by user)
 Evaluation of measured harmonics and recommendation of detuning factor for a PFC
system of calculated size
 Influence of detuning on the harmonics for the calculated detuning factor and system size is
given.
FK PC PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 7
Film Capacitors – Power Factor Correction
Grid analysis tool
Technical data and specifications
Operating voltage (auxiliary voltage)
Power consumption
Internal pre-fuse
Frequency
Measuring voltage (3-phase)
Measuring current (3-phase)
Display
Menu
Display of grid parameters
as real value / in % / as bar diagram
Display of 3 grid parameters in large
font
Display of harmonics
Oscilloscope mode
Sensitivity
Integrated help function with HELP
button
Recording, storage function
Storage of all grid parameters on SD
card according to pre-set measuring
interval
Data carrier
Measuring interval
Duration of recording per file at
intervals of 1/10/60 seconds
Additional storage of maximum
values in the internal store of the
measuring device
Error storage
110 …230 V AC +/-15% 50/60 Hz
< 5 VA
1 AT
50/60 Hz
3 • 30…440 V ~ (L-N) 50/60 Hz
3 • 50…690 V ~ (L-L) 50/60 Hz
30 / 300 / 3000 A (MiniFlex flexible current clamps, to be
ordered separately)
Illuminated, full graphic, 128 x 64 dot
D/ E / ES / RU / TR
3-phase
Cos-phi, V, I, f, Q, P, S, THD-V, THD-I
Selection in display editor
3rd to 51st harmonics of voltage and current, also as bar
diagram
Available
Current/voltage: 1%
Real, active and apparent power: 2%
Context dependent, plain text
3-phase
Cos-phi, V, I, f, Q, P, S, THD-V, THD-I
Standard SD card included in delivery
1 / 10 / 60 seconds
18 hours / 7 days / 45 days
Voltage, current, real-, reactive- and apparent power,
temperature, THD-V, THD-I
Error register in plain text with time stamp
FK PC PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
B44066M7777E230
MC7000-3
Page 4 of 7
Film Capacitors – Power Factor Correction
Grid analysis tool
Additional specifications
Ambient temperature range
(operation)
Storage temperature range
Pollution degree
Overvoltage class
Protection degree to IEC60529
Connection
Security
EMV
Casing
Weight
Accessories included
Accessories mandatory, but not
included in the delivery
-10 …+50 °C
-20 …+60 °C
2
CAT III
IP40
N connection mandatory, PE if N not available
IEC 61010-1:2001; EN 61010-1:2001
IEC 61000-4-2: 8kV; IEC 61000-4-4: 4kV
Compact lightweight plastic case
390 x 310 x 147 mm (outside dimensions)
Approx. 4 kg
3 safety measuring cables 2 m (black, red, violet),
1000 V, CAT IV, incl. high-power fuse
1 safety measuring line 2 m, blue, 1000 V, CATIII
4 safety dolphin clips 1000 V, CATIII, black, red, violet, blue
Windows software CD
1 memory card (SD-Card); 1GB
1 power lead
3 flexible MiniFlex current clamps, cable 2.8 m, 600 Vrms
(CAT IV), 1000 Vrms (CAT III) max. 3000 A, sensor 400 mm
Ordering code 1 piece: B44066M1301E230
Ordering code 3 pieces: B44066M1303E230
FK PC PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
B44066M7777E230
MC7000-3
Page 5 of 7
Film Capacitors – Power Factor Correction
Grid analysis tool
B44066M7777E230
MC7000-3
Cautions and warnings
 The MC7000-3 is designed exclusively for use in low-voltage switching systems. It is unsuitable
for measurements in mid and high-voltage networks.
 The maximum permissible supply voltages (see technical data) must not be exceeded!
 The equipment may be operated only by suitably trained personnel.
 Before applying the measuring voltage, the device must be grounded via the power connection
line (protective conductor socket). An additional PE socket is available. Measurements with
ungrounded equipment constitute a hazard and are impermissible!
 When measuring systems whose zero-potential status is not ensured, the accident prevention
specifications must be observed!
 For voltage measurements, only measuring lines with an isolation class of at least CATIII/1000 V
may be used.
Note
For detailed information about PFC capacitors and cautions, refer to the latest version of the EPCOS
PFC Product Profile.
FK PC PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 7
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic,
DSSP, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod,
PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,
SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in
other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 7 of 7
Similar pages