DIODE(THREE PHASES BRIDGE TYPE) DF30DB40/80 Power Diode Module DF30DB is designed for three phase full wave rectification, which has six diodes connected in a three phase bridge configuration. The mounting base of the module is electrically isolated from semiconductor elements for simple heatsink construction output DC current is 30Amp (Tc=83℃) Repetitive peak reverse voltage is up to 800V. 10.0 10.0 11.3 ● Isolated Mounting Base reliability by unique glass passivation ● Easy Assemble by the #250 terminal Tab ● High 25.0 8.5 17.0 ● TjMax=150℃ 52.0 43.3 2-φ4.3×5.3 6.35 〜 〜 2.0 25.0 〜 6.0 12.0 ＋ ＿ Unit：a ■Maximum Ratings （Tj＝25℃ unless otherwise specified） Item Symbol R6 4.55 （Applications） AC. DC Motor Drive/AVR/Switching ―for three phase rectification 0.8 5-TAB250 φ1.65 Ratings DF30DB40 DF30DB80 Unit VRRM Repetitive Peak Reverse Voltage 400 800 V VRSM Non-Repetitive Peak Reverse Voltage 500 900 V Symbol Item Conditions Output current (D.C.) Three phase. full wave. TC＝83℃ IFSM Surge Forward Current 1 cycle, 50/60HZ, peak value, non-repetitive Tj Junction Temperature Tstg Storage Temperature ID VISO Isolation Breakdown Voltage（R.M.S.） Main Terminal to case 1minute Mounting Torque（M4） Recommended Value 1.0-1.4（10-14） Mass Typical Value Ratings Unit 30 A 365/400 A −40 to ＋150 ℃ −40 to ＋125 ℃ 2000 V 1.5（15） N･m （㎏f･B） 32 g ■Electrical Characteristics Symbol Item Ratings Unit IRRM Repetitive Peak Reverse Current, max. Tj＝150℃ at VRRM 1.5 mA VFM Forward Voltage Drop, max. IFM＝30A, Tj＝25℃ Inst. measurement 1.1 V Junction to case 1.0 ℃/W Rth（j-c） Thermal Impedance, max. Conditions 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DF30DB40/80 Forward Voltage Drop max. Power Dissipation Pav（W） ８０ Forward Current I（A） F １００ ５0 ２0 Per one element Tj＝25℃ １０ ５ ２ 1 ０ １ Output Current vs. Power Dissipation ７０ ６０ ５０ ４０ ３０ Three Phase ２０ １０ ０ ２ ５ ４００ １４０ １５ １２０ Three Phase ２５ ３０ Per one element Tj＝25℃ start ３００ １３０ ２０ Cycle Surge Forward Current Rating （Non-Repetitive） Surge Forward Current I（A） F Allowable Case Temperature Tc（℃） １５０ Output Current vs. Allowable case Temp １０ Output Current（A） Forward Voltage Drop V（V） F 60Hz 50Hz ２００ １１０ １００ １００ ９０ ８０ ５ ０ １０ １５ ２０ ２５ ０ ０ １０ ３０ Transient Thermal Impedance θj-c（℃/W） Output Current（A） ２ ５ １０１ ２ ５ １０２ Time（Cycles） Transient Thermal Impedance（max） １． ２ Junction to Case １． ０ ０． ８ ０． ６ ０． ４ ０． ２ ０ ５ １０１ ２ ５ １００ ２ Time t（sec） ５ １０１ ２ ５ 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]