Willow CCP-33DX0-TMS Commercial failsafe spdt, dc-3ghz, low pim Datasheet

Series CCP-33D
COAX SWITCHES
Low PIM DC–3 GHz
Failsafe SPDT Coaxial Switch
PART NUMBER
DESCRIPTION
CCP-33D
Commercial Failsafe SPDT, DC-3GHz, Low PIM
These switches have extremely low passive intermodulation for use in narrow bandwidth communications
applications. The CCP-33D is a broadband, SPDT, electromechanical, coaxial switch designed to switch
a microwave signal from a common input to either of two outputs. The characteristic impedance is 50
Ohms.
The CCP-33D series switch is offered with a failsafe actuator and a 7/16 DIN female connector.
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
Operating Temperature
–40°C to 65°C
Form Factor
Vibration (MIL-STD-202 Method 214,
Condition D, non-operating)
10 g’s RMS
Shock (MIL-STD-202 Method 213,
Condition D, non-operating)
500 g’s
Standard Actuator Life
1,000,000 cycles
Connector Type
7/16 DIN
Humidity (Moisture Seal)
Available
Weight
6 oz. (170.1g) (max.)
SPDT,
break before make
Frequency Range
DC–3 GHz
Characteristic Impedance
50 Ohms
Switching Time
20 ms (max.)
Actuation Voltage Available
12
15
24
28 V
Actuation Current, max. @ ambient
400 450 180 200 mA
PERFORMANCE CHARACTERISTICS
PASSIVE INTERMODULATION CHARACTERISTICS
Frequency
Tone 1 Frequency
(MHz)
Tone 2 Frequency
(MHz)
IM3 Frequency
(MHz)
PIM Threshold
(dBc)
1945
1990
1900
-140.0
P1 P2 (dBm)
PIM (dBc)
PEAK PIM (dBc)
43
-166.8
-165.6
DC–3 GHz
Insertion Loss, dB, max.
Isolation, dB, min.
0.35
70
VSWR , max.
1.30:1
RF Power (cw), W, max.
200
PART NUMBERING SYSTEM
CCP-33
D
1
C
-
T **
Options
Series
Connectors
Actuator Type
Actuator Voltage
Connector
D: 7/16 Female
Actuator Voltage
1: 28 Vdc Failsafe
2: 15 Vdc Failsafe
3: 12 Vdc Failsafe
4: 24 Vdc Failsafe
Actuator Type
0: Standard Contacts
C: Indicator Contacts
**SEE PARTS LIST ON PAGE 6
Options
T: TTL Drivers with Diodes
D: Transient Suppression
Diodes
M: Moisture Seal
S: 9 Pin D-Sub Connector
For additional options, contact factory.
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCP-33D Page 1
CCP-33D\072013\Q3
Series CCP-33D
COAX SWITCHES
Low PIM DC–3 GHz
Failsafe SPDT Coaxial Switch
SCHEMATICS AND MECHANICAL OUTLINE
TELEDYNE COAX SWITCHES
P/N:
VOLTAGE:
D/C:
M/O:
VDC
RoHS
MADE IN
SCHEMATIC
9 PIN D-SUB PINOUT FOR FAILSAFE SPDT
TRUTH TABLE (with TTL option)
OPTIONS
Pin
No.
1
2
3
4
5
6
7
8
9
Basic
Indicators
+
-
+
-
CCP-33D Page 2
A
B
C
TTL
Indicators &
TTL
Common
1
Common
1
Vsw
Vsw
A
B
C
Logic
Input
1
RF Path
Indicator
(if applicable)
IN
to 1
IN
to 2
A
0
On
Off
C
0
1
Off
On
0
C
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
B
© 2013 TELEDYNE COAX SWITCHES
CCP-33D\072013\Q3
Series CCP-33D
COAX SWITCHES
Low PIM DC–3 GHz
Failsafe SPDT Coaxial Switch
TYPICAL BROADBAND RF PERFORMANCE CURVES
Insertion Loss ( DC-3 GHz )
0.0
-0.1
Insertion Loss ( dB )
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
0
0.5
1
1.5
2
2.5
3
2
2.5
3
2
2.5
3
Frequency ( GHz )
Isolation ( DC-3 GHz )
0
Isolation ( dB )
-20
-40
-60
-80
-100
-120
-140
0
0.5
1
1.5
Frequency ( GHz )
VSWR ( DC-3 GHz )
2.0
1.9
1.8
VSWR
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0
0.5
1
1.5
Frequency ( GHz )
RF NOTES
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCP-33D Page 3
CCP-33D\072013\Q3
Series CCP-33D
COAX SWITCHES
Low PIM DC–3 GHz
Failsafe SPDT Coaxial Switch
TYPICAL POWER PERFORMANCE CURVE
Power Handling vs. Frequency
3000
2000
7/1
6D
IN C
onn
1000
800
600
ect
or S
wit
ch
Power (W)
400
300
200
100
80
60
40
30
20
10
.1
.2
.3 .4 .6 .8 1
2
3
Frequency GHz
Estimates based on the following reference conditions:
• Ambient temperature of 40°C or less
• Sea level operation
• Load VSWR of 1.20:1 maximum
• No high-power (hot) switching
Please contact Teledyne Coax Switches for derating factors when applications do not meet the foregoing reference conditions.
CCP-33D Page 4
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2013 TELEDYNE COAX SWITCHES
CCP-33D\072013\Q3
Series CCP-33D
COAX SWITCHES
Low PIM DC–3 GHz
Failsafe SPDT Coaxial Switch
GLOSSARY
Actuator
An actuator is the electromechanical mechanism that
transfers the RF contacts from one position to another upon
DC command.
TTL Switch Driver Option
As a special option, switch drivers can be provided for both
failsafe and latching switches, which are compatible with
industry-standard low-power Schottky TTL circuits.
Arc Suppression Diode
A diode is connected in parallel with the coil. This diode
limits the “reverse EMF spike” generated when the coil deenergizes to 0.7 volts. The diode cathode is connected to
the positive side of the coil and the anode is connected to
the negative side.
Performance Parameters vs Frequency
Generally speaking, the RF performance of coaxial switches
is frequency dependent. With increasing frequency, VSWR
and insertion loss increase while isolation decreases. All
data sheets specify these three parameters as “worst case”
at the highest operating frequency. If the switch is to be
used over a narrow frequency band, better performance
can be achieved.
Date Code
All switches are marked with either a unique serial number
or a date code. Date codes are in accordance with MILSTD-1285 Paragraph 5.2.5 and consist of four digits.
The first two digits define the year and the last two digits
define the week of the year (YYWW). Thus, 1032 identifies
switches that passed through final inspection during the
32nd week of 2010.
Failsafe
A failsafe switch reverts to the default or failsafe position
when actuating voltage is removed. This is realized by a
return spring within the drive mechanism. This type of switch
requires the continuous application of operating voltage to
select and hold any position. (Multi-position switches are
normally open with no voltage applied).
Indicator
Indicators tell the system which position the switch is in.
Other names for indicators are telemetry contacts or tellback
circuit. Indicators are usually a set of internally mounted DC
contacts linked to the actuator. They can be wired to digital
input lines, status lights, or interlocks. Unless otherwise
specified, the maximum indicator contact rating is 30 Vdc,
50 mA, or 1.5 Watts into a resistive load.
Isolation
Isolation is the measure of the power level at the output
connector of an unconnected RF channel as referenced to
the power at the input connector. It is specified in dB below
the input power level.
Actuator Current vs Temperature
The resistance of the actuator coil varies as a function of
temperature. There is an inverse relationship between the
operating temperature of the switch and the actuator drive
current. For switches operating at 28 VDC, the approximate
actuator drive current at temperature, T, can be calculated
using the equation:
IT =
IA
[1 + .00385 (T-20)]
Where:
IT = Actuator current at temperature, T
IA = Room temperature actuator current –
see data sheet
T = Temperature of interest in °C
Magnetic Sensitivity
An electro-mechanical switch can be sensitive to ferrous
materials and external magnetic fields. Neighboring ferrous
materials should be permitted no closer than 0.5 inches and
adjacent external magnetic fields should be limited to a flux
density of less than 5 Gauss.
SPDT Switch
A single-pole double-throw, bi-directional switch that can
be used as having one input and two outputs or two inputs
and one output.
Switching Time
Switching time is the total interval beginning with the arrival
of the leading edge of the command pulse at the switch DC
input and ending with the completion of the switch transfer,
including contact bounce. It consists of three parts: (1)
inductive delay in the coil, (2) transfer time of the physical
movement of the contacts, and (3) the bounce time of the
RF contacts.
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCP-33D Page 5
CCP-33D\072013\Q3
Series CCP-33D
Low PIM DC–3 GHz
Failsafe SPDT Coaxial Switch
COAX SWITCHES
FAILSAFE CCP-33D PART NUMBER LIST
PART NO.
*
1
CCP-33DXC
2
CCP-33DXC-D
3
CCP-33DXC-DM
4
CCP-33DXC-DMS
5
CCP-33DXC-DS
6
CCP-33DXC-M
7
CCP-33DXC-MS
8
CCP-33DXC-S
9
CCP-33DXC-T
10
CCP-33DXC-TM
11
CCP-33DXC-TMS
12
CCP-33DXC-TS
13
CCP-33DX0
14
CCP-33DX0-D
15
CCP-33DX0-DM
16
CCP-33DX0-DMS
17
CCP-33DX0-DS
18
CCP-33DX0-M
19
CCP-33DX0-MS
20
CCP-33DX0-S
21
CCP-33DX0-T
22
CCP-33DX0-TM
23
CCP-33DX0-TMS
24
CCP-33DX0-TS
X = 1 (28Vdc), 2 (15Vdc), 3 (12Vdc) and 4 (24Vdc)
CCP-33D Page 6
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2013 TELEDYNE COAX SWITCHES
CCP-33D\072013\Q3
Similar pages