Data Sheet 0701C CRYSTAL OSCILLATORS AE-X29PXXX-X Series PECL/LVPECL UHF XO Rev. L Description The AE-X29PXXX Series of crystal oscillators (XO) provides ultra high frequency with PECL/LVPECL or differential Sine-Wave complementary outputs. The device is based on low noise analog harmonic frequency multiplication, providing exceptionally low Phase Noise and Jitter. It’s packaged in a miniature, FR-4 based 17x14 mm SMD package. Applications and Features • • • • • • Fiber Channel; 10 GbE; Infiniband; Network Processors; SONET/SDH High Reliability – NEL HALT/HASS qualified for crystal oscillator start-up conditions Extremely Low Phase Noise and Jitter Frequency Range to 2,500 MHz High Shock Resistance, to 1000g COTS/Dual use Creating a Part Number AE- X 29P X X X - X - FREQ Environmental L Contains a level of lead that is in excess of RoHS directive and is not designed for reflow R RoHS compliant Package code AE – 8 pad 17x14 mm SMD Operating Voltage 0 - 5.0 V ± 5% A - 3.3 V ± 5% B – 2.5 V ± 5% Output Type P – PECL S – Differential Sine Temperature Range, ºC A – 0 to 50 B - 0 to 70 C - -20 to 70 D - -40 to 85 9 – customer specific Frequency Stability, ppm E ± 20 F ± 25 ppm G ± 50 ppm H ± 100 ppm 9 – customer specific 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com CRYSTAL OSCILLATORS Data Sheet 0701C AE-X29PXXX-X Series Rev L Drawing Specification OUTLINE TOLERANCE: ±0.015” / 0.4mm (Unless otherwise specified) PIN FUNCTIONS: [1] Vcc [2] [3] [4] [7] - GND [5] OUTPUT [6] COMP. OUTPUT [8] N/C MARKING (EXAMPLE): AE-XXXX Absolute Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Supply Voltage Symbol To Tst Vcc Value Unit -40 to +85 -50 to +90 -0.5 to 5.5 ºC ºC V 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com CRYSTAL OSCILLATORS Data Sheet 0701C AE-X29PXXX-X Series Rev L Electrical Parameters (1) Parameter Symb Nominal Frequency Supply Voltage Fo Vcc Supply current Output Logic Type Icc Load Output Levels Voh Conditions, Note Code 0 Code A Code B Output to Vcc-2V, or Thevenin Equivalent, PECL Sine – internally AC coupled PECL MIN 250 4.75 3.135 2.375 TYP 5.0 3.3 2.5 140 LVPECL Sine 50 Tr/Tf J Wavecrest characterized Phase Noise £(Δf) Sub-harmonics Frequency Stability, over all conditions ΔF/F Unit 2,500 5.25 3.465 2.625 160 MHz V mA Ohm Vcc1.025 V Vol Duty Cycle (Symmetry), PECL Rise/Fall Time, PECL Jitter Integrated MAX Vcc1.620 Sine At 50% of output voltage swing 20 to 80, 80 to 20 % Integrated from Phase Noise, 12 KHz to 20 MHz , RMS 100Hz to 80KHz,RMS 50 KHz to 80 MHz Random period, Accumul. pk-to-pk Determin. 1,500 @ 10 Hz MHz, @100 Hz APR 50 @1 KHz ppm or @10KHz less @100KHz @>1MHz At 1,500 MHz See chart 45/55 -3 dBm 50/50 55/45 % 0.25 0.1 0.3 0.2 ns ps 1.0 0.3 2.5 ps ps ps 25 ps 1 -50 -80 -115 -130 -130 -135 -50 ±50 ps -45 -75 -110 -125 -125 -130 -46 dBc/Hz dBc ppm Note 1. All parameters, unless otherwise specified, are at nominal conditions, ie: T=25°C, Nominal Vcc & Nominal Load. 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com CRYSTAL OSCILLATORS Data Sheet 0701C AE-X29PXXX-X Rev. L Environmental and Mechanical Characteristics Operating temp. range Mechanical Shock Thermal Shock Vibration Hermetic Seal see part # table Soldering conditions See MAX reflow profile below; The device may be reflowed once. Reflowing upside down is not allowed. NO CLEAN assembly is recommended. Per MIL-STD-202, Method 213, Cond. A Per MIL-STD-883, Method 1011, Cond. A Per MIL-STD-883, Method 2007, Cond. A Leak rate less than 1 x10-8 atm.cc/s of helium , crystal only. MAX Reflow Profile The device may be reflowed once. Reflowing upside down is not allowed. NO CLEAN assembly is recommended. 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com