PRODUCT DATASHEET Mirella series last update 2/11/2016 DETAILS Product Number CN13770_MIRELLA-50-S-CL-PF Family Mirella Type RefPack Color metal Diameter 49,9 mm Height 25,7 mm Style round Optic Material PC Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 2/11/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector V6 Gen6 13 deg Spot 84 % 7.400 - V8 Gen6 16 deg Spot 84 % 4.900 - CXA/B 15xx 19 deg Spot 84 % 4.300 - CXA/B 13xx 12 deg Spot 82 % 8.500 - LUXEON CoB 1202s 13 deg Spot 84 % 7.600 LEDiL: LEDiL LUXEON CoB Compact sim: 13 Spot sim: 84 % sim: 7.600 LEDiL: LEDiL Soleriq P6 14 deg Spot 84 % 7.250 - Soleriq P9 19 deg Spot 84 % 4.240 - STARK SLE PURE G3 LES10 18 deg Spot 82 % 4.700 - May 23rd 2017 4:54 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 Relative intensity of CN13770_MIRELLA-50-S-CL-PF (CXA15) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 Relative intensity of CN13770_MIRELLA-50-S-CL-PF_(CXA1304) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 Relative intensity of CN13770_MIRELLA-50-S-CLPF_(Luxeon_CoB_mini) 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 1: 0-180 -20 -30 -40 -50 -60 Relative intensity of CN13770_MIRELLA-50-S-CL-PF_(Soleriq P6) 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 Relative intensity of CN13770_MIRELLA-50-S-CL-PF_(Soleriq P9) 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 A B C D NOTE: It is recommended to use glue like DELO-PUR 9895 for pin fastening. 12 4 0 http://www.delo.de/fileadmin/datasheet/ DELO-PUR_9895_(TIDB-GB).pdf 38 4 31 23 Front view 3 Isometric view 3 1.2 49 .9 Detail B Top view 39 25.6 2 21.9 A B 2.3 A Section view A-A Front view Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE MIRELLA-PF CXA15 Datasheet SIZE 1 PART NUMBER A4 SCALE D 2 1:1 WEIGHT - SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.