DZ23-Series www.vishay.com Vishay Semiconductors Small Signal Zener Diodes, Dual FEATURES • Dual silicon planar Zener diodes, common cathode 3 Available • The Zener voltages are graded according to the international E24 standard. Standard Zener voltage tolerance is ± 5 %. 1 2 • The parameters are valid for both diodes in one case. VZ and Rzj of the two diodes in one case is 5 % • AEC-Q101 qualified available PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 2.7 to 51 V Test current IZT 5 mA VZ specification Pulse current Int. construction Dual common cathode • ESD capability according to AEC-Q101: Human body model > 8 kV Machine model > 800 V • Base P/N-E3 - RoHS-compliant, commercial grade • Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ORDERING INFORMATION DEVICE NAME ORDERING CODE DZ23C2V7-E3-08 to DZ23C51-E3-08 DZ23-series DZ23C2V7-HE3-08 to DZ23C51-HE3-08 DZ23C2V7-E3-18 to DZ23C51-E3-18 DZ23C2V7-HE3-18 to DZ23C51-HE3-18 TAPED UNITS PER REEL MINIMUM ORDER QUANTITY 3000 (8 mm tape on 7" reel) 15 000 10 000 (8 mm tape on 13" reel) 10 000 PACKAGE PACKAGE NAME SOT-23 WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS 8.8 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation Device on fiberglass substrate, see layout on page 6 Ptot 300 mW Thermal resistance, junction to ambient air Device on fiberglass substrate, see layout on page 6 RthJA 420 K/W Tj 150 °C Storage temperature range Tstg -65 to +150 °C Operating temperature range Top -55 to +150 °C IZ Ptot/VZ mA Junction temperature Zener current Rev. 2.0, 08-Nov-16 Document Number: 85765 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DZ23-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER MARKING CODE VZ at IZT1 TEST CURRENT IZT1 V IZT2 mA REVERSE VOLTAGE DYNAMIC RESISTANCE f = 1 kHz TEMPERATURE COEFFICIENT OF ZENER VOLTAGE VR at IR ZZ at IZT1 ZZK at IZT2 VZ at IZT1 10-4/°C V nA MIN. NOM. MAX. MAX. MAX. MIN. MAX. DZ23C2V7 V1 2.5 2.7 2.9 5 1 MAX. - - 75 (< 83) < 500 -9 -4 DZ23C3V0 V2 2.8 3.0 3.2 5 1 - - 80 (< 95) < 500 -9 -3 DZ23C3V3 V3 3.1 3.3 3.5 5 1 - - 80 (< 95) < 500 -8 -3 DZ23C3V6 V4 3.4 3.6 3.8 5 1 - - 80 (< 95) < 500 -8 -3 DZ23C3V9 V5 3.7 3.9 4.1 5 1 - - 80 (< 95) < 500 -7 -3 DZ23C4V3 V6 4 4.3 4.6 5 1 - - 80 (< 95) < 500 -6 -1 DZ23C4V7 V7 4.4 4.7 5 5 1 - - 70 (< 78) < 500 -5 2 DZ23C5V1 V8 4.8 5.1 5.4 5 1 > 0.8 100 30 (< 60) < 480 -3 4 DZ23C5V6 V9 5.2 5.6 6 5 1 >1 100 10 (< 40) < 400 -2 6 DZ23C6V2 V10 5.8 6.2 6.6 5 1 >2 100 4.8 (< 10) < 200 -1 7 DZ23C6V8 V11 6.4 6.8 7.2 5 1 >3 100 4.5 (< 8) < 150 2 7 DZ23C7V5 V12 7 7.5 7.9 5 1 >5 100 4 (< 7) < 50 3 7 DZ23C8V2 V13 7.7 8.2 8.7 5 1 >6 100 4.5 (< 7) < 50 4 7 DZ23C9V1 V14 8.5 9.1 9.6 5 1 >7 100 4.8 (< 10) < 50 5 8 DZ23C10 V15 9.4 10 10.6 5 1 > 7.5 100 5.2 (< 15) < 70 5 8 DZ23C11 V16 10.4 11 11.6 5 1 > 8.5 100 6 (< 20) < 70 5 9 DZ23C12 V17 11.4 12 12.7 5 1 >9 100 7 (< 20) < 90 6 9 DZ23C13 V18 12.4 13 14.1 5 1 > 10 100 9 (< 25) < 110 7 9 DZ23C15 V19 13.8 15 15.6 5 1 > 11 100 11 (< 30) < 110 7 9 DZ23C16 V20 15.3 16 17.1 5 1 > 12 100 13 (< 40) < 170 8 9.5 DZ23C18 V21 16.8 18 19.1 5 1 > 14 100 18 (< 50) < 170 8 9.5 DZ23C20 V22 18.8 20 21.2 5 1 > 15 100 20 (< 50) < 220 8 10 DZ23C22 V23 20.8 22 23.3 5 1 > 17 100 25 (< 55) < 220 8 10 DZ23C24 V24 22.8 24 25.6 5 1 > 18 100 28 (< 80) < 220 8 10 DZ23C27 V25 25.1 27 28.9 5 1 > 20 100 30 (< 80) < 250 8 10 DZ23C30 V26 28 30 32 5 1 > 22.5 100 35 (< 80) < 250 8 10 DZ23C33 V27 31 33 35 5 1 > 25 100 40 (< 80) < 250 8 10 DZ23C36 V28 34 36 38 5 1 > 27 100 40 (< 90) < 250 8 10 DZ23C39 V29 37 39 41 5 1 > 29 100 50 (< 90) < 300 10 12 DZ23C43 V30 40 43 46 5 1 > 32 100 60 (< 100) < 700 10 12 DZ23C47 V31 44 47 50 5 1 > 35 100 70 (< 100) < 750 10 12 DZ23C51 V32 48 51 54 5 1 > 38 100 70 (< 100) < 750 10 12 Note (1) Tested with pulses t = 5 ms p Rev. 2.0, 08-Nov-16 Document Number: 85765 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DZ23-Series www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) mA 103 Ω 100 TJ = 25 °C 102 IF 5 4 10 1 3 rzj TJ = 100 °C 10-1 33 2 27 22 10 TJ = 25 °C 10-2 18 15 5 4 10-3 3 -4 2 12 10 10 6.8/8.2 6.2 1 10-5 0 0.2 0.4 0.6 0.8 1V VF 18114 0.1 2 1 5 2 5 18119 10 IZ 2 5 100 mA Fig. 4 - Dynamic Resistance vs. Zener Current Fig. 1 - Forward Characteristics mW 500 Ω 103 Tj = 25 °C 7 5 4 400 Rzj Ptot 47 + 51 43 39 36 3 2 300 102 200 7 5 4 3 100 2 0 0 100 Tamb 18115 10 0.1 200 °C Fig. 2 - Admissible Power Dissipation vs. Ambient Temperature 3 4 5 2 3 4 5 IZ Ω 103 TJ = 25 °C 5 4 3 2 1 10 mA Fig. 5 - Dynamic Resistance vs. Zener Current Ω 1000 rzj 2 18120 Rzth Rzth = RthA x VZ x 5 4 3 2 Δ VZ ΔTj 102 100 5 4 3 5 4 3 2 2 10 2.7 3.6 4.7 5.1 5 4 3 2 5.6 1 0.1 18117 2 5 1 2 5 10 2 5 100 mA IZ Fig. 3 - Dynamic Resistance vs. Zener Current 10 5 4 3 negative 2 positive 1 1 18121 2 3 4 5 10 2 3 4 5 100 V VZ at IZ = 5 mA Fig. 6 - Thermal Differential Resistance vs. Zener Voltage Rev. 2.0, 08-Nov-16 Document Number: 85765 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DZ23-Series www.vishay.com Vishay Semiconductors Ω 100 mV/°C 100 7 IZ = 5 mA 5 4 Rzj Δ VZ ΔTj 3 2 80 60 10 7 40 5 4 3 20 2 Tj = 25 °C IZ = 5 mA 1 1 2 3 4 5 10 2 3 4 5 18122 0 100 V 0 VZ Fig. 7 - Dynamic Resistance vs. Zener Voltage 60 40 80 100 V VZ Fig. 10 - Temperature Dependence of Zener Voltage vs. Zener Voltage mV/°C 25 Δ VZ ΔTj 20 18125 V 9 8 20 5 mA IZ = 1 mA 20 mA 15 7 Δ VZ 51 6 5 10 43 4 36 3 5 2 0 1 0 -5 1 2 3 4 5 10 2 3 4 5 100 V VZ 18123 IZ = 2 mA -1 0 20 40 60 18126 Fig. 8 - Temperature Dependence of Zener Voltage vs. Zener Voltage 25 0.7 VZ at IZ = 5 mA V 1.6 15 1.2 Δ VZ 0.5 8 0.4 7 0.3 0.2 6.2 5.9 0.1 5.6 0 1 0.8 0.6 0.4 0.2 0 5.1 -1 3.6 - 0.2 0 18124 20 40 60 80 ΔVZ = Rzth x IZ 1.4 10 0.6 Δ VZ 140 °C Fig. 11 - Change of Zener Voltage vs. Junction Temperature V 0.8 80 100 120 Tj 4.7 100 120 140 C Tj Fig. 9 - Change of Zener Voltage vs. Junction Temperature - 0.2 - 0.4 18127 1 2 3 4 5 10 2 3 4 5 100 V VZ at IZ = 5 mA Fig. 12 - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage Rev. 2.0, 08-Nov-16 Document Number: 85765 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DZ23-Series www.vishay.com Vishay Semiconductors mA 30 V 5 10 12 ΔVZ = Rzth x IZ Tj = 25 °C 4 lZ Δ VZ 3 15 20 18 IZ = 5 mA 22 2 27 Test 10 current IZ 5 mA 1 33 36 IZ = 2 mA 0 0 20 40 60 0 100 V 80 0 VZ 18128 Tj = 25 °C 30 mA 10 2.7 40 Tj = 25 °C 6.8 lZ 40 V VZ 3.9 5.6 3.3 4.7 8 8.2 lZ 30 6 20 4 Test current IZ 5 mA 10 20 Fig. 15 - Breakdown Characteristics Fig. 13 - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage mA 50 10 18112 Test current IZ 5 mA 39 51 43 47 2 0 0 0 1 2 3 4 5 6 7 8 9 10 V 0 VZ 18111 Fig. 14 - Breakdown Characteristics 10 20 30 40 50 60 70 80 90 100 V VZ 18113 Fig. 16 - Breakdown Characteristics LAYOUT FOR RthJA TEST Thickness: fiberglass 0.059" (1.5 mm) Copper leads 0.012" (0.3 mm) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 Rev. 2.0, 08-Nov-16 Document Number: 85765 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DZ23-Series www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) 0° t o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.5 (0.020) 0.45 (0.018) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Rev. 2.0, 08-Nov-16 Document Number: 85765 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000