AD AD7877 Tape and reel packaging Datasheet

Tape and Reel Packaging
Introduction
Specifications
The electronics industry is making a tremendous investment in surfacemount technology. The reasons for this investment include cost savings
resulting from automated component placement and increased density
of PCB layout due to smaller package sizes.
Analog Devices’ tape and reel specifications are in conformance with the
EIA Standard 481 “Taping of Surface-Mount Components for Automatic
Placement.”
Today’s placement machines can pick and place thousands of components
per hour with a very high degree of accuracy. To achieve this performance,
the component delivery system must be capable of feeding parts at high
speeds in a consistent orientation, positively indexed to the demands of the
machine. The leads of the components must be protected from damage
during shipment, handling, and placement.
The preferred packing material available today for these demands is
tape and reel. Analog Devices’ tape and reel system is fully compatible
with the detaping equipment that is standard in most automated placement equipment.
In the tape and reel format, the components are placed in specifically
designed pockets embossed in a plastic carrier tape. The cover tape is
sealed to the carrier tape to keep the parts in place in these pockets. A row
of sprocket holes is provided along one edge of the embossed tape to facilitate positive indexing. The tape is then wound onto a rigid plastic reel that
provides mechanical protection during handling and storage. These reels
are dust-free and compatible with a clean environment.
ESD Protection
Analog Devices’ tape and reel delivery system is designed to offer a very
high degree of protection against electrostatic discharge (ESD). All tape
and reel materials are static-dissipative. In addition, drypacked reels are
shipped in moisture barrier bags; nondrypacked reels are shipped in a box
with ESD conductive coating or in a conductive ESD bag. To retain the benefits of this protection, the bags should be opened only at ESD controlled
workstations by trained personnel.
Peel Back Strength
The peel back force will be between 10 g and 100 g for 8 mm wide
tape and 10 g to 130 g for tapes 12 mm and wider when tested at room
temperature and pulled at a 175° to 180° angle with a peel-off speed of
300 ± 10 mm/min.
Direction of Feed
Direction of feed is defined as the direction in which the end user unreels
the tape. The direction of feed for all products is counterclockwise when the
reel is held with the round sprocket holes facing the observer.
Figure 1. Direction of feed.
www.analog.com
Pin 1 Orientation
Devices are reeled so that Pin 1 is oriented properly with the direction of feed and round sprocket holes. Pin 1 orientation
is denoted as C1 to C4, or M1, with respect to the direction of feed and round sprocket holes, as illustrated below.
DIRECTION OF FEED
ROUND
SPROCKET
HOLES
M1
C1
C2
C4
C3
Figure 2. Pin 1 orientation reference.
NBSOIC (C1)
WBSOIC (C1)
DIRECTION OF FEED
SSOP, TSSOP, AND MSOP (C1)
DIRECTION OF FEED
TQFP, LQFP, MQFP, AND LPCC (C2)
DIRECTION OF FEED
SOT-23 (C4)
DIRECTION OF FEED
DIRECTION OF FEED
PLCC (M1)
SOT-23 (C4)
DIRECTION OF FEED
DIRECTION OF FEED
Figure 3. Examples of standard Pin 1 orientation.
2
|
Tape and Reel Packaging
Table 1. Standard Package Tape and Reel (See Page 5 for Reel Definitions)
Package
Designator
Body Size
(mm)
PLCC
P
N/A
PLCC
P
N/A
PLCC
P
N/A
PLCC
P
PLCC
JLCC
Device Package Type
Tape Width Tape Pitch
Pin 1
(mm)
(mm)
Orientation
13" Reel (4" Hub)
13" Reel (6" Hub)
20
250
1000
N/A
16
12
M1
28, 32
Not offered
750
N/A
24
16
M1
44
Not offered
500
N/A
32
24
M1
N/A
68
Not offered
N/A
250
44
32
M1
P
N/A
84
Not offered
N/A
250
44
36
M1
J
N/A
28
Not offered
250
N/A
24
16
M1
JLCC
J
N/A
44
Not offered
500
N/A
32
24
M1
LCC
E
N/A
8
250
3000
N/A
12
8
M1
SOIC_N/SOIC_N_EP
R/RD
N/A
8
1000
2500
N/A
12
8
C1
SOIC_N/SOIC_N_EP
R/RD
N/A
14, 16
1000
2500
N/A
16
8
C1
QSOP
RQ/RC
N/A
16
1000
2500
N/A
12
8
C1
QSOP
RQ
N/A
20, 24, 28
1000
2500
N/A
16
8
C1
SOIC_W/SOIC_W_BAT
RW/RB
N/A
14, 16
400
1000
N/A
16
12
C1
SOIC_W/SOIC_W_BAT
RW/RB
N/A
18
400
1000
N/A
24
16
C1
SOIC_W/SOIC_W_BAT
RW/RB
N/A
20, 24
400
1000
N/A
24
12
C1
SOIC_W/SOIC_W_BAT
RW/RB
N/A
28
400
1000
N/A
32
12
C1
SSOP
RS
N/A
16, 20, 24
500
1500
N/A
16
12
C1
SSOP
RS
N/A
28
500
1500
N/A
24
12
C1
PSOP2
RP
N/A
20, 28
200
1000
N/A
24
12
C1
PSOP3
RR
N/A
20
Not offered
750
N/A
24
20
C1
RT
N/A
3
3000
10,000
N/A
8
4
C4
SOT_23
RJ/RT
N/A
5, 6, 8
3000
10,000
N/A
8
4
C4
SOT-143
RA
N/A
4
3000
10,000
N/A
8
4
C4
TSOT
UJ
N/A
5, 6, 8
3000
10,000
N/A
8
4
C4
SOT-223
KC
N/A
3
500
2500
N/A
16
12
C4
SC70
KS
N/A
3, 4, 5, 6
3000
10,000
N/A
8
4
C4
TSSOP_4.4
RU/RE
N/A
8, 14, 16, 20,
24, 28, 38
1000
2500
N/A
16
8
C1
TSSOP_6.1
RV
N/A
28, 48
Not offered
2500
N/A
24
12
C1
RM/RH
N/A
8, 10
1000
3000
N/A
12
8
C1
QC
N/A
14
Not offered
750
N/A
24
16
C1
TQFP
SU/SV
7 × 7 × 1.0
All counts
500
2000
Not offered
16
12
C2
TQFP
SU/SV
10 × 10 × 1.0
All counts
Not offered
1500
Not offered
24
16
C2
TQFP
SU/SV
12 × 12 × 1.0
All counts
Not offered
1000
Not offered
24
24
C2
TQFP
SU/SV
14 × 14 × 1.0
All counts
Not offered
1000
Not offered
32
24
C2
LQFP
ST
7 × 7 × 1.4
All counts
500
2000
Not offered
16
12
C2
LQFP
ST
10 × 10 × 1.4
All counts
Not offered
1500
Not offered
24
16
C2
LQFP
ST
12 × 12 × 1.4
All counts
Not offered
1000
Not offered
24
24
C2
LQFP
ST
14 × 14 × 1.4
All counts
Not offered
1000
Not offered
32
24
C2
LQFP
ST
14 × 20 × 1.4
All counts
Not offered
1000
Not offered
44
24
C1
1
MSOP
CERPAK
|
Reel Quantity
7" Reel
SOT_23_3
3
Number
of Leads
Tape and Reel Packaging
Table 1. Standard Package Tape and Reel (Continued) (See Page 5 for Reel Definitions)
Reel Quantity
Package
Designator
Body Size
(mm)
Number
of Leads
7" Reel
13" Reel (4" Hub)
13" Reel (6" Hub)
S
10 × 10 × 2.0
All counts
Not offered
800
Not offered
MQFP
S
14 × 14 × 2.0
All counts
Not offered
600
MQFP 2
S
14 × 14 × 2.7
All counts
Not offered
5002
CSP_BGA
BC
5×5
All counts
Not offered
4000
CSP_BGA
BC
6×6
All counts
Not offered
CSP_BGA
BC
7×7
All counts
CSP_BGA
BC
8×8
CSP_BGA
BC
9×9
Device Package Type
MQFP
Tape Width Tape Pitch
Pin 1
(mm)
(mm)
Orientation
24
24
C2
Not offered
32
24
C2
Not offered
12
8
C2
Not offered
12
8
C2
2500
Not offered
12
8
C2
Not offered
2000
Not offered
16
12
C2
All counts
Not offered
2000
Not offered
16
12
C2
All counts
500
2000
Not offered
16
12
C2
CSP_BGA
BC
10 × 10
All counts
400
1500
Not offered
24
16
C2
CSP_BGA
BC
12 × 12
All counts
Not offered
1500
Not offered
24
16
C2
CSP_BGA
BC
13 × 13
All counts
Not offered
1000
Not offered
24
24
C2
CSP_BGA
BC
17 × 17
All counts
Not offered
1000
Not offered
24
24
C2
BGA
B
19 × 19
All counts
Not offered
Not offered
700
32
24
C2
BGA
B
23 × 23
All counts
Not offered
Not offered
450
44
32
C2
BGA
B
27 × 27
All counts
Not offered
Not offered
450
44
32
C2
BGA
B
35 × 35
All counts
Not offered
Not offered
300
56
40
C2
CBGA
BG
7×7
32 balls
Not offered
500
Not offered
16
12
C2
LGA
CC
3.5 × 4.5
24
1500
5000
Not offered
12
8
C1
LGA
CC
6×8
All counts
1000
4000
Not offered
16
8
C1
LGA
CC
8 × 10
All counts
Not offered
2000
Not offered
24
12
C1
CC
10 × 10
All counts
Not offered
2000
Not offered
24
12
C2
CP
3×2
All counts
3000
10,000
Not offered
12
4
C1
LFCSP
CP
3×3
All counts
1500
5000
Not offered
12
8
C2
LFCSP
CP
4×4
All counts
1500
5000
Not offered
12
8
C2
LFCSP
CP
4×5
All counts
1500
5000
Not offered
12
8
C1
LFCSP
CP
5×5
All counts
1500
5000
Not offered
12
8
C2
LFCSP
CP
6×6
All counts
750
2500
Not offered
16
12
C2
LFCSP
CP
7×7
All counts
750
2500
Not offered
16
12
C2
LFCSP
CP
8×8
All counts
750
2500
Not offered
16
12
C2
LFCSP
CP
9×9
All counts
750
2500
Not offered
16
12
C2
LFCSP
CP
10 × 10
All counts
Not offered
2000
Not offered
24
16
C2
LFCSP
CP
5 × 5 × 1.45
All counts
Not offered
4000
Not offered
12
8
C2
LFCSP
CP
4 × 4 × 1.45
All counts
Not offered
4000
Not offered
12
8
C2
LFCSP
CP
3 × 5 × 1.45
All counts
1000
4000
Not offered
12
8
C1
LFCSP
CP
2 × 3 × 0.75
All counts
3000
10,000
Not offered
12
4
C2
LFCSP
CP
1.6 × 1.3 × 0.55
All counts
3000
10,000
Not offered
8
4
C1
LFCSP
CP
2.1 × 2.1 × 0.55
All counts
3000
10,000
Not offered
8
4
C1
LFCSP
CP
3 × 3 × 0.75
All counts
1500
5000
Not offered
12
8
C2
LGA
LFCSP
4
For SOT-23 packages with greater than three leads, use the RJ designator.
2 Advantek part number Q14X14-HHX52.OP2 is the only approved carrier tape for this package. When boxing this reel, dunnage (crumpled kraft paper) shall be used between the reel.
3
For bumped die or WLCSP packages, see Table 2. Orientation for these devices is as per EIA783 (bumps facing bottom of carrier cavity; Pin 1 towards sprocket holes).
4 Standard thickness for LFCSP is 0.85 mm, except when noted.
1 www.analog.com
| 4
Table 2. WLCSP/Bumped Die Sales Tape and Reel
Part Number
Device
Package Type
Package
Designator
ADG3304
ADG787
ADG819
ADG884
ADG888
ADL5500 1
ADM8834
AD6548
AD7877
AD8205
AD8311/AD8312
AD8605
AD9938
AD5801
AD58012
AD5398
AD9948/AD9949
ADG3308
ADG790
AD5806
ADAU1301
AD5820
AD5820 2
AD5805
AD15/AD416
AD5821
ADV7521
WLCSP
WLCSP
WLCSP
WLCSP
WLCSP
WLCSP
WLCSP
Bumped chip
WLCSP
CHIP
WLCSP
WLCSP
Bumped chip
WLCSP
WLCSP
WLCSP
WLCSP
WLCSP
WLCSP
WLCSP
Bumped chip
WLCSP
WLCSP
WLCSP
WLCSP
WLCSP
WLCSP
CB
CB
CB
CB
CB
CB
CB
CD
CB
C
CB
CB
CD
CB
CB
CB
CB
CB
CB
CB
CD
CB
CB
CB
CB
CB
CB
Die Size Die Size Die Size
X (𝛍m) Y (𝛍m) Z (𝛍m) 7" Reel
1610
1500
1140
1500
2000
1000
2000
3240
2765
1650
1000
940
2675
3270
3270
1515
2710
1960
2500
2500
1275
1035
1035
1170
1960
1515
3500
2010
2000
2180
2000
2000
1000
2000
3140
2545
1650
1500
1330
4290
3170
3170
1690
3360
2460
3000
2500
875
1500
1500
1890
2460
1690
3500
655
655
605
655
655
596
605
350
600
710
596
496
501
655
555
655
563
600
656
656
350
656
555
505
600
655
605
N/A
N/A
N/A
N/A
N/A
250
N/A
N/A
N/A
N/A
250
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Reel Quantity
13" Reel
(4" Hub)
13" Reel
(6" Hub)
3000
3000
3000
3000
3000
3000
4000
N/A
3000
4000
3000
4000
3000
1500
1500
3000
3000
3000
3000
3000
5000
3000
3000
3000
3000
3000
1500
10,000
10,000
10,000
10,000
10,000
10,000
15,000
3000
10,000
10,000
N/A
15,000
N/A
5000
5000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
5000
Tape Width
(mm)
Tape Pitch
(mm)
Pin 1
Orientation
8
8
8
8
8
8
8
12
8
8
8
8
12
12
12
8
8
8
8
8
8
8
8
8
8
8
12
4
4
4
4
4
4
4
8
4
4
4
4
4
8
8
4
4
4
4
4
4
4
4
4
4
4
8
C1
C1
C1
C1
C1
C1
C1
C2
C1
C1
C1
C1
C1
C4
C4
C1
C1
C1
C1
C1
C1
C1
C1
C1
C2
C1
C1
C-Pak part number 4205418-2/A (BD0090X0090) is the only approved carrier tape for the ADL5500 WLCSP.
Special carrier tapes exist for these products, where the required wafer thickness is 12 mil and the required spheres are 250 μm.
1 2 Table 3. Small Quantity Reel
Device Package Type
Package
Designator
Body Size
(mm)
Number
of Leads
Reel Quantity
7" Reel
Tape Width (mm)
Pin 1
Orientation
SOT-23
RT
N/A
3
250
8
4
C4
SOT-231
RJ/RT
N/A
5, 6, 8
250
8
4
C4
SOT-143
RT
N/A
4
250
8
4
C4
C4
SC70
KS
N/A
3, 4, 5, 6
250
8
4
MSOP
RM
N/A
8, 10
250
12
8
C1
WLCSP2
CB
N/A
All counts
250
See Table 2
See Table 2
See Table 2
LFCSP
CP
3×2
All counts
250
12
4
C1
LFCSP
CP
3×3
All counts
250
12
8
C2
LFCSP
CP
4×4
All counts
250
12
8
C2
LFCSP
CP
5×5
All counts
250
12
8
C2
For SOT-23 packages prior to Rev. W, all products and lead counts use RT. For SOT-23 packages from Rev. W, all new products with greater than three leads use the RJ designator.
2 For actual WLCSP products available in small quantity reels, please cross reference with “7” reel (small quantity)” column of Table 2.
1 Glossary
REEL7 (aka R7 or RL7)
This is a 7" reel. Quantities vary based on package size.
Reel (aka RL or R)
This is a 13" reel. Quantities vary based on package size.
Waffle Pack
A small 2" × 2" tray designed to contain a small quantity of product in small packages, such as LFCSP, and in die
forms like bare die, bumped chip, and WLCSPs.
5
Tape Pitch (mm)
|
Tape and Reel Packaging
Analog Devices, Inc.
Worldwide Headquarters
Analog Devices, Inc.
One Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
U.S.A.
Tel: 781.329.4700
(800.262.5643,
U.S.A. only)
Fax: 781.461.3113
Analog Devices, Inc.
Europe Headquarters
Analog Devices, Inc.
Wilhelm-Wagenfeld-Str. 6
80807 Munich
Germany
Tel: 49.89.76903.0
Fax: 49.89.76903.157
Analog Devices, Inc.
Japan Headquarters
Analog Devices, KK
New Pier Takeshiba
South Tower Building
1-16-1 Kaigan, Minato-ku,
Tokyo, 105-6891
Japan
Tel: 813.5402.8200
Fax: 813.5402.1064
Analog Devices, Inc.
Southeast Asia
Headquarters
Analog Devices
22/F One Corporate Avenue
222 Hu Bin Road
Shanghai, 200021
China
Tel: 86.21.2320.8000
Fax: 86.21.2320.8222
©2013 Analog Devices, Inc. All rights reserved.
Trademarks and registered trademarks are the
property of their respective owners.
T03762-0-1/13(J)
www.analog.com