Peaking Coils - Radial CT262LYF Series ctparts.com SPECIFICATIONS Please specify tolerance code when ordering. CT262LYF-101_ J = ±5%, K = ±10% From 0.10 mH to 15 mH Part Number ENGINEERING KIT #4F Not shown at actual size. RoHS Compliant CHARACTERISTICS Description: Radial leaded (low profile) fixed inductor Applications: Ideal as a choke coil and a trap coil for low profile equipment. Winding core is encapsulated in heat shrink plastic housing providing mechanical and environmental protection Temperature Coefficient: 440ppm / °C max. Inductance Tolerance: ±5%, ±10% Testing: Inductance and Q are tested on an HP4285A at specified frequency Packaging: Bulk pack; packaged in styrofoam Marking: Sleeving marked with inductance code Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. Inductance (mH) L Test Freq. (kHz) Q Fact. Min. Q Test Freq. (kHz) SRF Min. (MHz) DCR Max. (W W) Rated DC (mA) CT262LYF-101_ CT262LYF-121_ CT262LYF-151_ CT262LYF-181_ CT262LYF-221_ CT262LYF-271_ CT262LYF-331_ CT262LYF-391_ CT262LYF-471_ CT262LYF-561_ CT262LYF-681_ CT262LYF-821_ .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 796 796 796 796 796 796 796 796 796 796 796 796 60 60 60 60 60 60 60 60 60 60 60 60 796 796 796 796 796 796 796 796 796 796 796 796 6.1 5.5 5.0 4.7 4.5 4.1 3.8 3.5 3.2 2.9 2.7 2.3 2.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 5.0 6.0 6.0 7.0 200 200 200 200 150 150 150 100 100 100 100 50 CT262LYF-102_ CT262LYF-122_ CT262LYF-152_ CT262LYF-182_ CT262LYF-222_ CT262LYF-272_ CT262LYF-332_ CT262LYF-392_ CT262LYF-472_ CT262LYF-562_ CT262LYF-682_ CT262LYF-822_ 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 252 252 252 252 252 252 252 252 252 252 252 252 80 80 80 80 80 80 80 80 80 80 80 80 252 252 252 252 252 252 252 252 252 252 252 252 2.1 1.9 1.8 1.6 1.5 1.4 .90 .90 .80 .70 .70 .60 9.0 9.0 11 12 14 15 25 30 32 36 40 45 50 50 50 50 50 50 40 40 40 30 30 30 CT262LYF-103_ CT262LYF-123_ CT262LYF-153_ 10.0 12.0 15.0 79.6 79.6 79.6 60 60 60 79.6 79.6 79.6 .60 .50 .50 55 65 80 20 20 20 PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Nom. 6.2 8 0.24 0.32 CENTRAL Technologies 11.30.05 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice D 22 AWG 5 5 0.643 0.2 0.2 0.03 Nom.