PRODUCT DATASHEET Lena series last update 2/11/2016 DETAILS Product Number CN14089_LENA-S-DL Family Lena Type RefPack Color metal Diameter 111 mm Height 86 mm Style round Optic Material PC Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 2/11/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector VERO13 14 deg Spot 83 % 6.250 - VERO18 17 deg Spot 83 % 5.500 - V10 Gen7 sim: 11 Spot sim: 79 % sim: 12.280 Bender Wirth: 434 Typ L1 V13 Gen7 sim: 13 Spot sim: 81 % sim: 9.000 Bender Wirth: 477 Typ L1 CLL03x/CLU03x 14 deg Spot 80 % 6.700 Bender Wirth: 433 Typ L1 CLU700/701 8 deg Spot 80 % 17.500 Bender Wirth: 434 Typ L1 CLL02x/CLU02x (LES10) 10 deg Spot 80 % 11.500 Bender Wirth: 434 Typ L1 CXA/B 1816 & CXA/B 1820 & CXA 1850 12 deg Spot 82 % 8.600 Bender Wirth: 437 Typ L1 CXA/B 15xx 8 deg Spot 80 % 16.500 Bender Wirth: 441 Typ L1 CXM-14 sim: 14 Spot sim: 80 % sim: 6.700 Bender Wirth: 433 Typ L1 CXM-9 sim: 10 Spot sim: 80 % sim: 11.500 Bender Wirth: 434 Typ L1 COB L-Type (LES 9) 9 deg Spot 83 % 11.900 Bender Wirth: 438 Typ L1 COB J-Type 14 deg Spot 82 % 6.500 Bender Wirth: 463 Typ L2 COB L-Type (LES 11) 11 deg Spot 82 % 9.400 Bender Wirth: 438 Typ L1 Soleriq P9 9 deg Spot 86 % 11.000 Bender Wirth: 461 Typ L1 Soleriq P13 13 deg Spot 83 % 7.000 Bender Wirth: 437 Typ L1 Soleriq S13 12 deg Spot 80 % 8.000 Bender Wirth: 437 Typ L1 ZC12/18 sim: 14 Spot sim: 80 % sim: 6.700 Bender Wirth: 433 Typ L1 ZC4/6 sim: 10 Spot sim: 80 % sim: 11.500 Bender Wirth: 434 Typ L1 May 29th 2017 5:36 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H 4 With optional diffusion lens 4 11 1 3.2 86 84.4 75 3 3 29 LED position 85 .7 2 6 2 Socket Reflector INDEX PART NO MATERIAL COLOUR 1 Socket PC White 2 Reflector PC Metal Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: class C According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE DATA SHEET LENA-SOCKET VERO13-18 SIZE A3 SCALE H G PART NUMBER 1:1 WEIGHT - B SHEET A 1/1 1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.