July 13, 2007 SHIELDED SMD INDUCTOR DR350-6 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 6.0µH to 1500.0µH Operating Temp. -40°C to +85°C Tinned Leads with Leaded Solder is Available (note 7) ELECTRICAL SPECIFICATIONS AT 25ºC Inductance (µH) 6.0 ± 30% 10.0 ± 20% 15.0 ± 20% 22.0 ± 20% 33.0 ± 20% 47.0 ± 20% 68.0 ± 20% 100.0 ± 20% 150.0 ± 20% 220.0 ± 20% 330.0 ± 20% 470.0 ± 20% 680.0 ± 20% 1000.0 ± 20% 1500.0 ± 20% Part No. DR350-6-602 DR350-6-103 DR350-6-153 DR350-6-223 DR350-6-333 DR350-6-473 DR350-6-683 DR350-6-104 DR350-6-154 DR350-6-224 DR350-6-334 DR350-6-474 DR350-6-684 DR350-6-105 DR350-6-155 DCR (mΩ) ± 20% 16.4 21.5 25.9 33.8 41.5 61.8 83.2 117.0 190.0 270.0 410.0 520.0 760.0 1120.0 1730.0 I rms (A) Max. 4.9 4.3 3.9 3.4 3.1 2.5 2.2 1.8 1.4 1.2 1.0 0.88 0.73 0.60 0.48 I sat (A) Max. 3.6 3.4 2.8 2.3 1.9 1.6 1.3 1.1 0.88 0.72 0.59 0.49 0.43 0.34 0.29 MECHANICAL OUTLINES 12.5 0.3 5.5 8.6 0.35 3.0 12.5 0.3 1 XXX TOP VIEW 2 SIDE VIEW BOTTOM VIEW 1 2.5 3.2 2.5 8.6 PCB PAD LAYOUT (REF.) 2 SCHEMATIC Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Inductance Test: 1kHz, 0.5Vrms 4. Irms for an approximate 45°C temperature rise 5. Isat for an approximate 20% drop maximum of the nominal value 6. Tape and reel quantity, 500 pcs/reel 7. For non-RoHS parts replace DR prefix with 42- (e.g. DR350-6 becomes 42-350-6) 8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C. DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.