AC Film Capacitors Motor run B 32335 Construction Dielectric: polypropylene film Aluminum can Soft polyurethane resin Features Self-healing properties Low dissipation factor Overpressure disconnector High insulation resistance Typical applications For general sine wave applications, mainly as motor run capacitor for room air conditioner units Fan Herm Terminals Double fast on 6,3 x 0,8 mm and Quadruple fast on 6,3 x 0,8 mm Mounting parts Metal stud (max. torque = 5 Nm) Technical data and specifications Mains Standard IEC / EN 60252 Rated capacitance CN 15+2 ... 50+8µF Tolerance ± 5%, ± 6%, ±10% Rated voltage UN 380 ... 440 Vac Rated frequency fN 50...60 Hz Life expectance 30.000 h (class A) Maximum ratings Maximum permissible voltage Umax 1,1 x UN (Un = Rated voltage) Maximum permissible current Imax 1,3 x IN (In = Rated current) Test data AC test voltage terminal to terminal UTT 2 x UN, 60s. Insulation voltage terminals to case 2000 Vac, 60s. Insulation resistance Ris or time constant at τ 20 °C 3000 s Rel. Humidity ≤ 65 °C (minimum value) Dissipation factor tanδ at 20 °C ≤ 1,0 x10-3 (120 Hz) Maximum rate of voltage rises du/dtmax 10 V/µs Issue No. 2 07/01 Page 1 of 7 AC Film Capacitors Motor run B 32335 Technical data (cont`d) Climatic data Climatic category 25/085/21 according to IEC 60068-1 Lower category Tmin -25 °C Upper category Tmax +85 °C Damp heat test ttest 21 days Permitted capacitance ∆C/C ≤3% Approved marks UL810 10000 AFC Notes : 1) It should be noted that presence of harmonics produces over voltage & over current on capacitors. Resonance may cause serious damage to installation if a significant level of total harmonic distortion level exists for voltage or current. In such cases, series reactors must be considered. 2) Operating temperature class: in accordance with the reference standards, these temperatures are those measured on the surface on the capacitor. Issue No. 2 07/01 Page 2 of 7 AC Film Capacitors Motor run B 32335 Dimensional drawings ( from EIPL) B32335-A .... 070 B32335-A .... 050 After disconnection device operation Before disconnection device operation C - Common – 4 tabs ) H-Compressor – 2 tabs ( ) F-Fan – 2 tabs Issue No. 2 07/01 Page 3 of 7 AC Film Capacitors Motor run B 32335 Dimensional drawings ( From Icotron) B32335-B... 070 B32335-B... 050 Máx. 12mm After disconnection device operation Before disconnection device operation Issue No. 2 07/01 Page 4 of 7 AC Film Capacitors Motor run B 32335 Ordering codes and packing units UN CN Max. dimensions Ordering code Vac µF d x l (mm) B32335-* 380 15+2 53 x 68 3020-+0 ** 32 15+2.5 53 x 68 3076-+0 ** 32 3021-+0 ** 32 32 15+3 53 x 68 Packing units 15+4 53 x 68 3022-+0 ** 15+5 53 x 68 3023-+0 ** 32 3077-+0 ** 32 32 17.5+2.5 53 x 68 17.5+4 53 x 68 3024-+0 ** 17.5+5 53 x 68 3025-+0 ** 32 3027-+0 ** 32 3057-+0 ** 32 3028-+0 ** 32 32 20+2 20+2.5 20+3 53 x 68 53 x 68 53 x 68 20+4 53 x 68 3050-+0 ** 20+5 53 x 68 3029-+0 ** 32 3030-+0 ** 32 28 22+5 53 x 80 25+2 63.5 x 68 3031-+0 ** 25+2.5 53 x 80 3054-+0 ** 32 32 25+3 53 x 80 3032-+0 ** 25+4 53 x 80 3033-+0 ** 32 3034-+0 ** 32 32 25+5 53 x 80 25+7.5 53 x 80 3019-+0 ** 25+8 53 x 80 3051-+0 ** 32 3053-+0 ** 32 ** 32 25+9.5 53 x 80 25+10 53 x 85 3056-+0 25+15 53 x 105 3098-+0 ** 32 32 30+2 53 x 80 3035-+0 ** 30+3 53 x 80 3073-+0 ** 32 3036-+0 ** 32 32 30+4 53 x 80 30+5 53 x 80 3037-+0 ** 30+7.5 53 x 85 3066-+0 ** 32 30+10 53 x 85 3038-+0 ** 32 Issue No. 2 07/01 Page 5 of 7 AC Film Capacitors Motor run B 32335 UN CN Max. dimensions Ordering code [Vac] [µF] d x l [mm] B32335-* 380 30+12 53 x 105 3072-+0 ** 32 32 Packing units 30+15 53 x 105 3067-+0 ** 35+2 63.5 x 68 3081-+0 ** 28 ** 32 35+3 53 x 80 3059-+0 35+4 53 x 105 3039-+0** 35+5 53 x 105 32 3040-+0 ** 32 32 35+6 53 x 105 3085-+0 ** 35+8 53 x 105 3058-+0 ** 32 3052-+0 ** 32 32 35+9.5 53 x 105 35+10 53 x 105 3041-+0 ** 35+12 53 x 105 3079-+0 ** 32 32 35+15 53 x 105 3074-+0 ** 40+4 53 x 105 3090-+0 ** 32 3042-+0 ** 32 32 40+5 53 x 105 40+7.5 53 x 105 3086-+0 ** 40+8 53 x 105 3047-+0 ** 32 3043-+0 ** 32 32 40+10 53 x 105 40+12 53 x 105 3075-+0 ** 40+15 53 x 105 3078-+0 ** 32 28 45+4 63 x 80 3106-+0 ** 45+5 53 x 105 3044-+0 ** 32 3071-+0 ** 32 32 45+8 53 x 105 45+10 53 x 105 3045-+0 ** 50+4 63.5 x 86 3046-+0 ** 28 3048-+0 ** 32 3049-+0 ** 32 50+5 50+8 53 x 105 53 x 105 Issue No. 2 07/01 Page 6 of 7 AC Film Capacitors Motor run B 32335 UN CN Max. dimensions Ordering code [Vac] [µF] d x l [mm] B32335-* 440 15+2 53 x 68 5020-+0 15+5 53 x 80 5023-+0** 32 17,5+3 53 x 80 5130-+0** 32 20+1,5 53 x 80 5108-+0** 32 20+2 53 x 80 5027-+0 ** 32 5028-+0 ** 32 32 20+3 53 x 80 ** Packing units 32 20+4 53 x 80 5050-+0 ** 20+5 53 x 80 5029-+0 ** 32 ** 32 22+5 53 x 80 5030-+0 25+1,5 53 x 80 5109-+0** 25+2.5 53 x 80 32 5054-+0 ** 32 32 25+4 53 x 105 5033-+0 ** 25+5 53 x 105 5034-+0 ** 32 ** 32 25+8 53 x 105 5051-+0 30+3 53 x 105 5073-+0** 32 30+4 53 x 105 5036-+0** 32 30+5 53 x 105 5037-+0 ** 30+8 53 x 105 5080-+0 ** 32 5072-+0 ** 32 28 32 30+12 53 x 105 32 30+15 63.5 x 105 5067-+0 ** 35+5 53 x 105 5040-+0 ** 40+3 53 x 105 5091-+0** 32 40+4 53 x 105 5090-+0** 32 40+10 63.5 x 105 5043-+0 ** 28 Notes for ordering code: 1. Replace * for the version, A (Epcos India design) or B (Icotron design), according to the drawings on pages 3 and 4 2. Replace + for capacitance tolerance: - J- ±5%, E- ±6%, K- ±10% 3. Replace ** for can 50 - Aluminum can 70 - Aluminum can with stud M 8 fixing threaded bolt for ≤ φ 53mm. M12 fixing threaded bolt for φ 63.5mm. EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this data sheet describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. Issue No. 2 07/01 Page 7 of 7