ARIZONA MICROTEK, INC. AZ100LVEL32 PACKAGE AVAILABILITY FEATURES ECL/PECL 2 Divider PACKAGE Operating Range of 3.0V to 5.5V 470ps Propagation Delay 3.0+ GHz Toggle Frequency High Bandwidth Output Transitions Direct Replacement for ON Semiconductor MC100EL/LVEL32 >2 kV HBM ESD Protection Additional ESD Data Available on Arizona Microtek Website PART NUMBER SOIC 8 Green / RoHS Compliant / Lead (Pb) Free MSOP 8 Green / RoHS Compliant / Lead (Pb) Free MLP 8 (2x2) Green / RoHS Compliant / Lead (Pb) Free 1 2 3 MARKING NOTES AZ100LVEL32DG AZM100G LVEL32 1,2 AZ100LVEL32TG AZHG LV32 1,2 AZ100LVEL32NG C2G <Date Code> 1,3 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date code format: “Y” or “YY” for year followed by “WW” for week on underside of part. Date code format: “Y” for year followed by “WW” for week. DESCRIPTION The AZ100LVEL32 is an integrated ÷2 divider. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random logic state; the reset allows for the synchronization of multiple LVEL32’s in a system. The LVEL32 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device. ¯¯¯¯ differential For single-ended input applications, the VBB reference should be connected to one side of the CLK/CLK input pair. The input signal is then fed to the other CLK/CLK ¯¯¯¯ input. The VBB pin should be used only as a bias for the LVEL32 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a 0.01F capacitor. NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established. LOGIC DIAGRAM AND PINOUT ASSIGNMENT PIN DESCRIPTION RESET 1 PIN CLK, CLK ¯¯¯ RESET VBB Q, Q̄ VCC VEE FUNCTION Clock Inputs Asynchronous Reset Reference Voltage Output Data Outputs Positive Supply Negative Supply 8 VCC 7 Q R CLK 2 ÷2 CLK 3 6 Q VBB 4 5 VEE 1630 S. STAPLEY DR., SUITE 127 MESA, ARIZONA 85204 USA (480) 962-5881 FAX (623) 505-2414 www.azmicrotek.com AZ100LVEL32 Absolute Maximum Ratings are those values beyond which device life may be impaired. Symbol VCC VI VEE VI IOUT TA TSTG Characteristic PECL Power Supply (VEE = 0V) PECL Input Voltage (VEE = 0V) ECL Power Supply (VCC = 0V) ECL Input Voltage (VCC = 0V) Output Current --- Continuous --- Surge Operating Temperature Range Storage Temperature Range Rating 0 to +6.0 0 to +6.0 -6.0 to 0 -6.0 to 0 50 100 -40 to +85 -65 to +150 Unit Vdc Vdc Vdc Vdc mA C C ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND) Symbol VOH VOL VIH VIL IIH IIL VBB IEE 1. Characteristic 1 Min -1085 -1830 -1165 -1810 -40C Typ -1005 -1695 Max -880 -1555 -880 -1475 150 Min -1025 -1810 -1165 -1810 Output HIGH Voltage Output LOW Voltage1 Input HIGH Voltage Input LOW Voltage Input HIGH Current Input LOW Current CLK, CLK ¯¯¯ -150 -150 RESET 0.5 0.5 Output Reference -1380 -1260 -1380 Voltage Power Supply Current 25 30 Each output is terminated through a 50 resistor to VCC – 2V. 0C Typ -955 -1705 Max -880 -1620 -880 -1475 150 Min -1025 -1810 -1165 -1810 25C Typ -955 -1705 Max -880 -1620 -880 -1475 150 -150 0.5 -1260 25 85C Typ -955 -1705 Max -880 -1620 -880 -1475 150 -1260 25 -1380 30 Unit mV mV mV mV A A -150 0.5 -1380 30 Min -1025 -1810 -1165 -1810 29 -1260 mV 35 mA LVPECL DC Characteristics (VEE = GND, VCC = +3.3V) Symb VOHol VOL VIH VIL IIH IIL VBB IEE 1. 2. Characteristic 1,2 Min 2215 1470 2135 1490 -40C Typ 2295 1605 Max 2420 1745 2420 1825 150 Min 2275 1490 2135 1490 0C Typ 2345 1595 Max 2420 1680 2420 1825 150 Min 2275 1490 2135 1490 Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Input HIGH Current Input LOW Current -150 -150 -150 CLK, CLK ¯¯¯ 0.5 0.5 0.5 RESET Output Reference 1920 2040 1920 2040 1920 Voltage1 Power Supply Current 25 30 25 30 For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50 resistor to VCC – 2V. 25C Typ 2345 1595 Max 2420 1680 2420 1825 150 Min 2275 1490 2135 1490 85C Typ 2345 1595 Max 2420 1680 2420 1825 150 25 1920 30 mV mV mV mV A A -150 0.5 2040 Unit 29 2040 mV 35 mA PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol VOH VOL VIH VIL IIH IIL VBB IEE 1. 2. Characteristic 1,2 Min 3915 3170 3835 3190 -40C Typ 3995 3305 Max 4120 3445 4120 3525 150 Min 3975 3190 3835 3190 0C Typ 4045 3295 Max 4120 3380 4120 3525 150 Min 3975 3190 3835 3190 Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Input HIGH Current Input LOW Current -150 -150 -150 CLK, CLK ¯¯¯ 0.5 0.5 0.5 RESET Output Reference 3620 3740 3620 3740 3620 Voltage1 Power Supply Current 25 30 25 30 For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50 resistor to VCC – 2V. April 2011 * REV - 3 www.azmicrotek.com 2 25C Typ 4045 3295 Max 4120 3380 4120 3525 150 Min 3975 3190 3835 3190 85C Typ 4045 3295 Max 4120 3380 4120 3525 150 3740 30 mV mV mV mV A A -150 0.5 25 Unit 3620 29 3740 mV 35 mA AZ100LVEL32 AC Characteristics (VEE = -3.0V to -5.5V; VCC = GND or VEE = GND; VCC = +3.0V to +5.5V) Symbol Characteristic Min -40C Typ Max Min 0C Typ Max Min 25C Typ Max Min 85C Typ Max Unit Maximum Toggle 2.6 2.6 2.6 2.6 GHz Frequency Propagation Delay tPLH/tPHL 580 ps 490 400 560 470 380 550 460 370 540 450 360 CLK, CLK ¯¯¯ to Q/Q̄ 650 550 450 640 540 440 640 540 440 690 540 390 RESET to Q/Q̄ VPP (AC) Input Swing1 150 1000 150 1000 150 1000 150 1000 mV VCC - VEE + VCC VEE + VCC - VEE + VCC VEE + Common Mode Range2 1.2 0.4 1.1 0.4 1.1 0.4 1.1 0.4 V VCMR VPP < 500 mv 1.4 0.4 1.3 0.4 1.3 0.4 1.3 0.4 VPP ≥ 500 mv Output Rise/Fall Times tr / t f 100 260 100 260 100 260 100 260 ps Q/Q̄ (20% - 80%) 1. VPP is the peak-to-peak differential input swing range for which AC parameters are guaranteed. 2. VCMR is defined as the range within which the VIH level may vary, with the device still meeting the propagation delay specification. The VIL level must be such that VPP is within the differential input swing range specified. fmax Figure 1: Timing Diagram CLK RESET Q Typical Large Signal Output Swing, Q/Q̄ 900 800 VOUTpp(mV) 700 600 fOUT=fIN÷2 500 400 300 200 0 1000 2000 3000 4000 5000 INPUT FREQUENCY (MHz) Measured with 750mv D input, Q/Q̄ each terminated to VCC-2V via 50 Ω resistors. April 2011 * REV - 3 www.azmicrotek.com 3 AZ100LVEL32 PACKAGE DIAGRAM SOIC 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. April 2011 * REV - 3 DIM A A1 A2 A3 bp c D E e HE L Lp Q v w y Z www.azmicrotek.com 4 MILLIMETERS MIN MAX 1.75 0.10 0.25 1.25 1.45 0.25 0.36 0.49 0.19 0.25 4.8 5.0 3.8 4.0 1.27 5.80 6.20 1.05 0.40 1.00 0.60 0.70 0.25 0.25 0.10 0.30 0.70 0O 8O INCHES MIN MAX 0.069 0.004 0.010 0.049 0.057 0.01 0.014 0.019 0.0075 0.0100 0.19 0.20 0.15 0.16 0.050 0.228 0.244 0.041 0.016 0.039 0.024 0.028 0.01 0.01 0.004 0.012 0.028 0O 8O AZ100LVEL32 PACKAGE DIAGRAM MSOP 8 DIM A A1 A2 A3 bp c D E e HE L Lp v w y Z NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. April 2011 * REV - 3 www.azmicrotek.com 5 MILLIMETERS MIN MAX 1.10 0.05 0.15 0.80 0.95 0.25 0.25 0.45 0.15 0.28 2.90 3.10 2.90 3.10 0.65 4.70 5.10 0.94 0.40 0.70 0.10 0.10 0.10 0.35 0.70 0O 6O AZ100LVEL32 PACKAGE DIAGRAM MLP 8 2x2mm Pin 1 Dot By Marking 2.000±0.050 MLP 8 (2x2mm) 2.000±0.050 TOP VIEW Pin 1 Identification R0.100 TYP 0.350±0.050 0.250±0.050 0.500 bsc 8 1 7 6 2 1.200±0.050 exp. pad 3 5 4 0.600±0.050 exp. pad BOTTOM VIEW 0.750±0.050 0.000-0.050 1 2 SIDE VIEW Note: All dimensions are in mm April 2011 * REV - 3 www.azmicrotek.com 6 3 4 0.203±0.025 1.750 Ref. AZ100LVEL32 - Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. April 2011 * REV - 3 www.azmicrotek.com 7