Wall DTIPU20B-109 20 watt single output ac/dc desktop power supply Datasheet

DTIPU20 Series
20 Watt
Single Output
AC/DC Desktop Power Supply
Rev A
FEATURES
● Splash Proof
● Single Output
● 3 Year Warranty
● A Type: Class I Insulation
● B Type: Class II Insulation
● CEC and Energy Star Compliance
● 2 Types of Inlet Connectors Available
● Optional Output Connectors Available
● Approved as Limited Power Source (LPS)
● Wide Input Voltage 90~264VAC, 47~63Hz
● -20°C~+70°C Operating Temperature Range
Type A
Type B
DESCRIPTION
The DTIPU20 Series of AC/DC switching mode single output power supplies provides 20 watts of continuous output power. All models have a
single output, universal input voltage range, and an operating temperature range of -20°C ~ +70°C. This series also has two types of AC inlet
connectors to choose from: Type A (IEC-320-C6) or Type B (IEC-320-C8). All supplies are UL 94V-1 compliant. All models meet FCC Part-15 class
B and CISPR-22 class B emission limits and are designed to comply with UL/cUL (UL 60950-1), TUV/GS (EN 60950-1) and new CE requirements.
All units are CEC and Energy Star compliant and are 100% burn-in tested.
SPECIFICATIONS: DTIPU20 Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Nom
Max
Unit
12
26
0.5
0.15
0.25
264
63
0.4
0.25
15
30
0.75
0.25
0.5
VAC
Hz
A
A
A
A
mA
mA
s
INPUT (Vin)
Operating Voltage Range
Input Frequency
Input Current (Low Line)
Input Current (High Line)
Inrush Current (Low Line)
Inrush Current (High Line)
Safety Ground Leakage Current (A Type)
Safety Ground Leakage Current (B Type)
Start-Up Time
90
47
Io = Full Load, Vin = 115VAC
Io = Full Load, Vin = 230VAC
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
Io = Full Load, Vin = 240VAC
Io = Full Load, Vin = 240VAC
Io = Full Load, Vin = 100VAC
OUTPUT (Vo)
Output Voltage Range
Load Regulation
Line Regulation
Output Power Range
Output Current Range
Ripple & Noise (peak to peak)
Transient Response Time
Hold-Up Time
Vin = 230VAC
Io = Full Load
Vin = 90 to 264VAC
Full Load, Vin = 90VAC
Io = Full Load to Half Load, Vin = 100VAC
Io = Full Load, Vin = 110VAC
1
0
12
See Rating Chart
3
5
0.5
1
20
See Rating Chart
0.5
1
4
14
16
%
%
W
%
ms
ms
PROTECTION
Over Voltage Protection
Over Current Protection
Nil
110
150
%
%
GENERAL
Efficiency
Dielectric Withstanding Voltage
For Primary to Secondary
Dielectric Withstanding Voltage
For Primary to Ground (A Type Only)
Isolation Resistance
No Load Power Consumption
Io = Full Load, Vin = 230VAC
75
85
95
%
Primary to Secondary
4242
VDC
Primary to Ground
2121
VDC
Test Voltage = 500VDC
No Load, Vin = 240VAC
50
0
0.4
0.5
MΩ
W
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Relative Humidity
Temperature Coefficient
MTBF
Derate linearly from 100% Load at 40°C to 50% load at 70°C
All Outputs
Operating temperature at 25°C, Calculated per MIL-HDBK-217F
-20
-40
5
-0.04
70
85
95
+0.04
300,000 hours
°C
°C
%
%/°C
PHYSICAL
Weight
Dimensions (L x W x H)
Input Inlet
Warranty
Approximately 170 grams
3.90 x 1.65 x 1.22 inches
A Type: IEC-320-C6, B Type: IEC-320-C8
3 years
SAFETY
CISPR (EMI Requirements for CISPR-22)
FCC (EMI Requirements for FCC Part-15)
Vin = 220VAC
Vin = 110VAC
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
B
B
Class
Class
DTIPU20 Series
20 Watt
Single Output
AC/DC Desktop Power Supply
Rev A
MODEL SELECTION CHART
\
Model Number
Preset Voltage
*DTIPU20A-102
*DTIPU20A-105
*DTIPU20A-106
*DTIPU20A-108
*DTIPU20A-109
DTIPU20A-111
*DTIPU20B-102
*DTIPU20B-105
*DTIPU20B-106
*DTIPU20B-108
*DTIPU20B-109
DTIPU20B-111
6 VDC
13 VDC
16 VDC
27 VDC
33 VDC
48 VDC
6 VDC
13 VDC
16 VDC
27 VDC
33 VDC
48 VDC
Output Voltage
Range
5 ~ 6 VDC
11 ~ 13 VDC
13 ~ 16 VDC
21 ~ 27 VDC
27 ~ 33 VDC
40 ~ 48 VDC
5 ~ 6 VDC
11 ~ 13 VDC
13 ~ 16 VDC
21 ~ 27 VDC
27 ~ 33 VDC
40 ~ 48 VDC
Output Current
Total Regulation
Max Output Power
3.00 ~ 2.50A
1.81 ~ 1.53A
1.53 ~ 1.25A
0.95 ~ 0.74A
0.74 ~ 0.60A
0.50 ~ 0.41A
3.00 ~ 2.50A
1.81 ~ 1.53A
1.53 ~ 1.25A
0.95 ~ 0.74A
0.74 ~ 0.60A
0.50 ~ 0.41A
5%
4%
4%
3%
3%
3%
5%
4%
4%
3%
3%
3%
15W
20W
20W
20W
20W
20W
15W
20W
20W
20W
20W
20W
AC Inlet
Connector
IEC-320-C6
IEC-320-C8
NOTES
1. The DTIPU20 Series is designated as DTIPU20x-y where x represents the type of AC input inlet connector which can either be
A (IEC-320-C6) or B (IEC-320-C8); y can be 102, 103, 104, 105, 106, 107, 108, 109, 110 or 111 for output voltage.
2. The output voltage is specified as a range (Ex: 40 ~ 48VDC); the preset voltage will be set as standard models if nothing different is
requested. Please contact factory for ordering details.
3. To meet the total regulation specifications all models must use an AWG#18/4FT output cable. The regulation will change if the output
cable is modified.
4. The “*” represents TUV/PSE approval. Models with output voltages under 30VDC have been approved by TUV/PSE.
5. Optional output connectors are available. Please call factory for ordering details.
MECHANICAL DRAWINGS
Unit: inches [mm]
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Similar pages