AVAGO ABA-53563-TR2G 3.5 ghz broadband silicon rfic amplifier 3.5 db noise figure Datasheet

ABA-53563
3.5 GHz Broadband Silicon RFIC Amplifier
Data Sheet
Description
Avago’s ABA-53563 is an economical, easy-to-use,
internally 50-ohm matched silicon monolithic
amplifier that offers excellent gain and flat broadband
response from DC to 3.5 GHz. Packaged in an ultraminiature industry-standard SOT-363 package, it
requires half the board space of a SOT-143 package.
Features
• Operating frequency: DC ~ 3.5 GHz
• 21.5 dB gain
• VSWR < 2.0 throughout operating frequency
• 12.7 dBm output P1dB
• 3.5 dB noise figure
At 2 GHz, the ABA-53563 offers a small-signal gain
of 21.5 dB, output P1dB of 12.7 dBm and 22.9 dBm
output third order intercept point. It is suitable for
use as buffer amplifiers for wideband applications.
They are designed for low cost gain blocks in cellular
applications, DBS tuners, LNB and other wireless
communications systems.
ABA-53563 is fabricated using Avago’s HP25 silicon
bipolar process, which employs a double-diffused
single polysilicon process with self-aligned submicron
emitter geometry. The process is capable of
simultaneous high fT and high NPN breakdown
(25 GHz fT at 6V BVCEO). The process utilizes industry standard device oxide isolation technologies and
submicron aluminum multilayer interconnect to
achieve superior performance, high uniformity, and
proven reliability.
• Unconditionally stable
• Single 5V supply (Id = 46 mA)
• Lead-free option available
Applications
• Amplifier for cellular, cordless, special mobile radio, PCS,
ISM, wireless LAN, DBS, TVRO, and TV tuner applications
Attention:
Observe precautions for
handling electrostatic
sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 1A)
Surface Mount Package: SOT-363/SC70
Refer to Agilent Application Note A004R:
Electrostatic Discharge Damage and Control.
Simplified Schematic
Vcc
Pin Connections and Package Marking
GND 2
Input
3Hx
GND 1
Output
& Vcc
RF
Output
& Vcc
RF
Input
GND 3
Ground 2
Vcc
Note:
Top View. Package marking provides orientation
and identification. “x” is character to identify
date code.
Ground 3
Ground 1
ABA-53563 Absolute Maximum Ratings [1]
Symbol
Parameter
Units
Absolute Max.
Vcc
Device Voltage, RF output to ground (T = 25°C)
V
+7
Pin
CW RF Input Power (Vcc = 5V)
dBm
+20
Pdiss
Total Power Dissipation [3]
W
0.47
Tj
Junction Temperature
°C
150
TSTG
Storage Temperature
°C
-65 to 150
Thermal Resistance[2] (Vcc = 5V)
θjc = 117°C/W
Notes:
1. Operation of this device in excess of any of
these limits may cause permanent damage.
2. Thermal resistance measured using 150°C
Liquid Crystal Measurement Technique.
3. Board (package belly) temperature, Tb, is
25°C. Derate 5 mW/°C for Tb > 94.8°C.
Electrical Specifications
Tc = +25°C, Zo = 50 Ω, Pin = -30 dBm, Vcc = 5V, Freq = 2 GHz, unless stated otherwise.
Symbol
Parameter and Test Condition
Gp[1]
Power Gain (|S21| )
∆Gp
Power Gain Flatness,
NF[1]
P1dB[1]
OIP3[1]
2
VSWRin[1]
VSWRout
[1]
f = 0.1 ~ 2.5 GHz
f = 0.1 ~ 3.5 GHz
Units
Min.
Typ.
dB
20
21.5
Max.
Std Dev.
0.2
dB
0.6
2.7
Noise Figure
dB
3.5
Output Power at 1dB Gain Compression
dBm
12.7
0.14
Output Third Order Intercept Point
dBm
22.9
0.14
Input VSWR
1.1
Output VSWR
1.2
Icc[1]
Device Current
mA
46
td[1]
Group Delay
ps
160
4
57
0.11
0.6
Notes:
1. Measurements taken on 50Ω test board shown on Figure 1. Excess circuit losses had been de-embedded from actual measurements. Standard
deviation and typical data based on at least 500 parts sample size from 6 wafer lots. Future wafers allocated to this product may have nominal values
anywhere within the upper and lower spec limits.
Cblock
RF Output
3Hx
RFC
RF Input
Vcc
Cblock
Cbypass
Figure 1. ABA-53563 Production Test Circuit.
2
ABA-53563 Typical Performance
24
4.5
22
22
4
20
3.5
20
18
4.5V
5V
5.5V
16
NF (dB)
24
GAIN (dB)
GAIN (dB)
Tc = +25°C, Zo = 50Ω, Vcc = 5V unless stated otherwise.
18
-40°C
+25°C
+85°C
16
0
0.5
1
1.5
2
2.5
3
3.5
2
0
4
0.5
1
2
2.5
3
3.5
4
18
4
14
3
-40°C
+25°C
+85°C
2
2
2.5
3
3.5
FREQUENCY (GHz)
Figure 5. Noise Figure vs. Frequency and
Temperature.
4
1.5
2
2.5
3
3.5
4
16
10
4.5V
5V
5.5V
12
8
-40°C
+25°C
+85°C
4
2
1.5
1
20
6
1
1
0.5
Figure 4. Noise Figure vs. Frequency and
Voltage.
P1dB (dBm)
5
0.5
0
FREQUENCY (GHz)
Figure 3. Gain vs. Frequency and Temperature.
P1dB (dBm)
NF (dB)
Figure 2. Gain vs. Frequency and Voltage.
3
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
0
4.5V
5V
5.5V
2.5
14
14
3
0
0
0.5
1
1.5
2
2.5
3
3.5
FREQUENCY (GHz)
Figure 6. Output Power for 1 dB Gain
Compression vs. Frequency and Voltage.
4
0
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
Figure 7. Output Power for 1 dB Gain
Compression vs. Frequency and Temperature.
ABA-53563 Typical Performance, continued
35
35
30
30
25
25
OIP3 (dBm)
OIP3 (dBm)
Tc = +25°C, Zo = 50Ω, Vcc = 5V unless stated otherwise.
20
15
4.5V
5V
5.5V
10
20
15
10
5
-40°C
+25°C
+85°C
5
0
0
0
1
0.5
1.5
2
2.5
3
3.5
4
0
0.5
1
FREQUENCY (GHz)
Figure 8. Output IP3 vs. Frequency and
Voltage.
2
2.5
3.5
3
4
Figure 9. Output IP3 vs. Frequency and
Temperature.
2.0
80
70
VSWR IN
VSWR OUT
1.8
-40°C
+25°C
-85°C
60
Icc (mA)
1.6
VSWR
1.5
FREQUENCY (GHz)
1.4
50
40
30
1.2
20
1.0
0.8
10
0
0
1
2
3
4
5
FREQUENCY (GHz)
Figure 10. Input and Output VSWR vs.
Frequency.
4
6
0
1
2
3
4
5
6
VOLTAGE (V)
Figure 11. Supply Current vs. Voltage and
Temperature.
7
ABA-53563 Typical Scattering Parameters
TC = +25°C, VCC = 5V, ZO = 50 Ω, unless stated otherwise
Freq
(GHz)
S11
Mag.
S11
Ang.
S21
dB
S21
Mag.
S21
Ang.
S12
dB
S12
Mag.
S12
Ang.
S22
Mag.
S22
Ang.
K
Factor
0.05
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
1.00
1.20
1.40
1.60
1.80
2.00
2.20
2.40
2.60
2.80
3.00
3.20
3.40
3.50
4.00
4.50
5.00
5.50
6.00
0.09
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.07
0.07
0.05
0.04
0.03
0.02
0.01
0.01
0.01
0.02
0.03
0.03
0.04
0.06
0.06
0.11
0.14
0.17
0.23
0.28
169.3
165.6
164.9
164.3
162.9
163.8
162.4
159.6
158.1
158.6
158.3
149.9
147.4
139.0
127.0
94.0
-22.9
-49.8
-83.6
-95.4
-112.0
-128.4
-146.0
-152.9
170.6
137.6
122.9
110.6
99.6
21.6
21.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
21.5
21.6
21.6
21.6
21.6
21.5
21.4
21.2
21.0
20.7
20.2
19.7
19.2
18.9
17.4
16.0
14.3
13.0
11.8
11.98
11.87
11.85
11.85
11.86
11.90
11.89
11.90
11.92
11.92
11.95
12.00
12.04
12.06
12.01
11.89
11.77
11.53
11.21
10.79
10.25
9.68
9.08
8.78
7.41
6.30
5.21
4.47
3.88
-3.4
-5.9
-10.5
-15.4
-20.4
-25.5
-30.5
-35.6
-40.6
-45.7
-50.9
-61.3
-71.9
-83.0
-94.4
-105.8
-117.4
-129.2
-141.1
-153.1
-164.9
-176.1
173.1
167.7
143.3
120.2
99.1
80.1
63.4
-29.4
-29.4
-29.6
-29.6
-29.9
-29.9
-29.9
-29.9
-29.9
-29.9
-29.9
-29.9
-29.6
-29.6
-29.4
-28.9
-29.6
-28.4
-28.0
-27.7
-27.5
-26.9
-26.6
-26.4
-25.8
-24.7
-23.9
-22.9
-22.0
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.07
0.08
-0.6
-0.7
-0.8
-0.4
0.1
0.8
1.7
2.5
3.4
4.5
5.5
7.7
9.5
11.5
13.0
14.5
15.4
15.8
15.8
16.4
16.9
16.8
16.2
16.0
14.1
12.9
10.0
5.1
-0.2
0.12
0.12
0.12
0.11
0.11
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.09
0.08
0.05
0.04
0.04
-2.3
-5.8
-11.7
-16.5
-20.5
-23.8
-27.2
-30.9
-34.6
-36.7
-39.1
-41.7
-42.7
-43.3
-42.3
-38.8
-36.3
-34.4
-33.9
-33.7
-32.1
-28.9
-30.1
-30.9
-38.3
-41.5
-57.3
-82.0
-142.5
1.414
1.424
1.458
1.458
1.491
1.489
1.490
1.490
1.488
1.489
1.487
1.483
1.448
1.446
1.420
1.374
1.356
1.348
1.327
1.338
1.362
1.348
1.364
1.373
1.477
1.505
1.612
1.624
1.656
5
Device Models
Refer to Avago’s web site
www.avagotech.com/view/rf
Ordering Information
Part Number
Devices per Container
Container
ABA-53563-TR1
3000
7" reel
ABA-53563-TR2
10000
13" reel
ABA-53563-BLK
100
antistatic bag
ABA-53563-TR1G
3000
7" reel
ABA-53563-TR2G
10000
13" reel
ABA-53563-BLKG
100
antistatic bag
Note: For lead-free option,the part number will have the character “G” at the end.
Package Dimensions
Outline 63 (SOT-363/SC-70)
Recommended PCB Pad Layout for
Avago's SC70 6L/SOT-363 Products
0.026
HE
E
0.079
e
0.039
D
0.018
Q1
A2
Dimensions in inches.
A
c
A1
L
b
DIMENSIONS (mm)
SYMBOL
E
D
HE
A
A2
A1
Q1
e
b
c
L
6
MAX.
1.35
2.25
2.40
1.10
1.00
0.10
0.40
MIN.
1.15
1.80
1.80
0.80
0.80
0.00
0.10
0.650 BCS
0.15
0.10
0.10
0.30
0.20
0.30
NOTES:
1. All dimensions are in mm.
2. Dimensions are inclusive of plating.
3. Dimensions are exclusive of mold flash & metal burr.
4. All specifications comply to EIAJ SC70.
5. Die is facing up for mold and facing down for trim/form,
ie: reverse trim/form.
6. Package surface to be mirror finish.
Device Orientation
REEL
TOP VIEW
END VIEW
4 mm
8 mm
CARRIER
TAPE
USER
FEED
DIRECTION
3H
3H
3H
3H
(Package marking example orientation shown.)
COVER TAPE
Tape Dimensions and Product Orientation for Outline 63
P
P2
D
P0
E
F
W
C
D1
t1 (CARRIER TAPE THICKNESS)
Tt (COVER TAPE THICKNESS)
K0
10° MAX.
A0
DESCRIPTION
7
10° MAX.
B0
SYMBOL
SIZE (mm)
SIZE (INCHES)
CAVITY
LENGTH
WIDTH
DEPTH
PITCH
BOTTOM HOLE DIAMETER
A0
B0
K0
P
D1
2.40 ± 0.10
2.40 ± 0.10
1.20 ± 0.10
4.00 ± 0.10
1.00 + 0.25
0.094 ± 0.004
0.094 ± 0.004
0.047 ± 0.004
0.157 ± 0.004
0.039 + 0.010
PERFORATION
DIAMETER
PITCH
POSITION
D
P0
E
1.50 ± 0.10
4.00 ± 0.10
1.75 ± 0.10
0.061 + 0.002
0.157 ± 0.004
0.069 ± 0.004
CARRIER TAPE
WIDTH
THICKNESS
W
t1
8.00 + 0.30 - 0.10
0.254 ± 0.02
0.315 + 0.012
0.0100 ± 0.0008
COVER TAPE
WIDTH
TAPE THICKNESS
C
Tt
5.40 ± 0.10
0.062 ± 0.001
0.205 + 0.004
0.0025 ± 0.0004
DISTANCE
CAVITY TO PERFORATION
(WIDTH DIRECTION)
F
3.50 ± 0.05
0.138 ± 0.002
CAVITY TO PERFORATION
(LENGTH DIRECTION)
P2
2.00 ± 0.05
0.079 ± 0.002
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte.
in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved.
Obsoletes 5989-0952EN
5989-1972EN March 31, 2006
Similar pages