DB101S THRU DB107S SINGLE PHASE GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE:50 TO 1000V CURRENT:1.0A FEATURE DBS For surface mount application Reliable low cost construction utilizing molded plastic Technique Surge overload rating:50 A peak MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case:UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Vrrm Maximum RMS Voltage Vrms Maximum DC blocking Voltage Vdc Maximum Average Forward Rectified If(av) Current at Ta =40°C Peak Forward Surge Current 8.3ms single Ifsm half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at Vf forward current 1.0A Maximum DC Reverse Current Ta =25°C Ir at rated DC blocking voltage Ta =125°C Typical Junction Capacitance Cj Operating Temperature Range Tj Storage and Operating Junction Temperature Tstg Note: 1. Measured at 1.0 MHz and applied voltage of 4.0 volt Rev.A5 DB 101S 50 35 50 DB 102S 100 70 100 DB 103S 200 140 200 DB 104S 400 280 400 DB 105S 600 420 600 DB 106S 800 560 800 DB 107S 1000 700 1000 Units V V V 1.0 A 50.0 A 1.1 V 10.0 500.0 25.0 -55 to +125 -55 to +150 µA uA Pf °C °C www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES DB101S THRU DB107S 1 1 Rev.A5 www.gulfsemi.com