DS9094F iButton PCB Clip www.maxim-ic.com DESCRIPTION ORDERING INFORMATION The DS9094F iButton PCB Clip holds an iButton and connects to a printed circuit board. By deflecting the spring clip in the molded housing, an iButton can be inserted and extracted without special tools. If reverse insertion is attempted, the beveled edge on the housing prevents contact. PART DS9094F+ TEMP RANGE -40°C to 85°C DS9094FS+ -40°C to 85°C 1 PIN-PACKAGE 1 Through-hole mount F5 can 2 Surface mount F5 can NOTE: Wave- or hand-solder only; do not reflow. 2 NOTE: Hand-solder only; do not reflow. + Denotes lead-free compliance. FEATURES Low-cost holder for F5 size iButton (see DS9094SM for F3 holder) Printed circuit board mount Contacts are gold plated Flammability rating: UL94V-O Two versions: − DS9094F for F5 size iButton − DS9094FS for surface mounting F5 size iButton INSERTION OF iButton GROUND DATA DS9094FS DS9094F Bot t om s ur f ac e of met al c ont ac t s t o be 0 t o 0. 13 bel ow t he s eat i ng pl ane of t he pl as t i c s uppor t s at al l poi nt s 0. 97 DI A. FI NI SHED HOLE 2PL. Recommended Hol e Si z e Rec ommended Pad Si z e All dimensions in millimeters. iButton is a registered trademark of Maxim Integrated Products, Inc. 1 of 2 072308 DS9094F REVISION HISTORY REVISION DATE 051606 072308 DESCRIPTION Original release Updated the soldering notes. PAGES CHANGED — 1 2 of 2