PULSEJACK TM RJ45/Dual USB Combo www.pulseeng.com Description: RJ45/Dual USB Combo is a Through Hole (THT) Integrated Connector Module with a single RJ45 in combination with 2USB ports. The internal magnetics are designed to support 10/100/1000Base-TX applications such as LAN-on-Motherboard (LOM) and PC applications. Features and Benefits: RoHS-5 peak wave solder temperature rating 235°C RoHS-6 peak wave solder temperature rating 260°C USB module complies with USB 2.0 standards RJ45 connection meets CAT3, 5e & 6 Fast Ethernet performance standard Electrical Performance Summary: Meets IEEE 802.3 specification High performance for maximum EMI suppression Minimum 1500Vrms isolation per IEEE 802.3 requirement Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C RoHS-6 3 Compliant Part No. RoHS-5 4 Compliant Part No. Turns Ratios Data LEDs 1 Insertion Loss TX/RX (dB MAX) 1-65 MHz Rate TX RX L/R Return Loss @ 100Ω ±15Ω (dB TYP) 1-10 MHz 30 MHz Common Mode Rejection (dB TYP) Crosstalk (dB MIN) 60-80 MHz 1-10 MHz 32-60 MHz 60-100 MHz 1-50 MHz 50-130 MHz Hipot (Vrms) (MIN) @60Hz 1 MIN JW0-0009NL JW0-0009 10/100 1CT:1 1CT:1 G/Y2 -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 JY0-0016NL 10/100 1CT:1 1CT:1 G-O/Y -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 JW0-0006NL JY0-0016 _ 10/100/1000 1CT:1 1CT:1 G-Y/G -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 JW0-0013NL JW0-0013 10/100/1000 1CT:1 1CT:1 G-O/Y -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 NOTES: 1. LEDs Left/Right: G = green; Y = yellow; O = Orange. 2. G = Green with 250Ω internal resistor; Y = Yellow with 250Ω internal resistor. 3. RoHS-6 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Some internal connections may contain lead in high temperature solder (solder alloys containing more than 85% lead). 4. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Product contains lead in applications considered as solders. RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) JW/JY Series 5lbs./2.268kgs. 5lbs./2.268kgs. 500 Insertions 20lbs./9.072kgs. RJ45 Material Specification Part Number Material Shield Finish JW/JY Series Brass 20-40µ inches thick nickel over brass Material Contact Plating Area Solder Area 3 Phosphor Bronze 15µ inches gold over 30-80µ inches nickel 75-300µ inches tin-lead over 75-300µ inches bright nickel NOTES:1. Connector dimensions comply with FCC dimension requirements. Housing Material Specification Thermoplastic UL 94 V-0 MSL 2 Rating 1 2. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest rating = 1, lowest rating = 5) 3. NL parts are tin matte finish over nickel. USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 1 J408.E (4/08) PULSEJACK TM RJ45/Dual USB Combo www.pulseeng.com Mechanical JY0-0016 10 9 8 6 5 2 7 4 3 1 1 2 3 4 USB Port (Top) 1 2 3 4 USB Port (Bottom) Weight . . . . . . . . . . .8.1 grams Tray . . . . . . . . . . . . . . .25/tray USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 2 J408.E (4/08) PULSEJACK TM RJ45/Dual USB Combo www.pulseeng.com Mechanical JW0-0006, JW0-0009, JW0-0013 11 12 10 13 8 9 6 7 4 5 14 2 3 1 1 2 3 4 USB Port (Top) 1 2 3 4 USB Port (Bottom) Weight . . . . . . . . . . .8.1 grams Tray . . . . . . . . . . . . . . .25/tray USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 3 J408.E (4/08) PULSEJACK TM RJ45/Dual USB Combo www.pulseeng.com Schematic JY0-0016 PCB connections to the Physical Layer IC CABLE USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 4 J408.E (4/08) PULSEJACK TM RJ45/Dual USB Combo www.pulseeng.com Schematic JW0-0009 PCB connections to the PHY IC CABLE USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 5 J408.E (4/08) PULSEJACK TM RJ45/Dual USB Combo www.pulseeng.com Schematic JW0-0006, JW0-0013 VCC PCB Connections to PHY MD3 - MX3 - MD3 + MX3 + MD2 - MX2 - MD2 + MX2 + CABLE MD1 - MX1 - MD1 + MX1 + MD0 - MX0 - MD0 + MX0 + GND JW0-0006 LEDs JW0-0013 LEDs USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 6 J408.E (4/08) PULSEJACK TM RJ45/Dual USB Combo USB/RJ45 Application Note This line of Integrated Connector Modules are specifically designed for the implementation of a 10Base-T, 100Base-TX and 1000Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5/5e). www.pulseeng.com providing these 10/100/1000 solutions, thereby assuring compatibility with each transceiver. JW0 and JY0 series meet the stringent open circuit inductance requirements of IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350µH. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with minimal attenuation and fast rise times to minimize system level jitter. The connectors provide excellent EMI filtering and are suitable for Desktop PC, Embedded Systems and Multiport Applications. Pulse has worked closely with the leading IC manufacturers in VCC JW0-0013 LEDs 10/100/1000 PHY-IC MD3 MD3 + MD2 MD2 + MX3 - 50W 50W MX3 + MX2 - 50W 50W MX2 + CABLE MD1 MD1 + MD0 MD0 + MX1 - 50W 50W MX1 + MX0 - 50W 50W MX0 + GND PCB Layout Recommendations: 2. Connections to ground should be as short as possible. 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50Ω connections. 3. Connections between the 10/100/1000 IC and the connector should be direct (ideally no change in direction) and of minimum length. For More Information: Pulse Worldwide Headquarters Pulse European Headquarters Pulse China Headquarters 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com Einsteinstrasse 1 D-71083 Herrenberg Germany TEL: 858 674 8100 FAX: 858 674 8262 TEL: 49 7032 7806 0 FAX: 49 7032 7806 12 B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Rd. High-Tech Zone Nanshan District Shenzen, PR China 518057 TEL: 86 755 33966678 FAX: 86 755 33966700 Pulse North China Pulse South Asia Pulse North Asia Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. 32667 TEL: 86 21 32181071 FAX: 86 21 32181396 TEL: 65 6287 8998 FAX: 65 6280 0080 TEL: 886 3 4643715 FAX: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2008. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 7 J408.E (4/08)