Maxim MAX14979EETX+ High-bandwidth,â±15kv esd protection lvds switch Datasheet

19-5252; Rev 0; 4/10
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
The MAX14979E is optimized for high-speed differential
switching applications. The device is ideal for low-voltage differential signal (LVDS) and low-voltage positive
emitter-coupled logic (LVPECL) switching applications.
The MAX14979E provides enhanced electrostatic discharge (ESD) protection up to Q15kV and excellent highfrequency response, making this device especially useful for interfaces that must go to an outside connection.
The MAX14979E provides extremely low capacitance
(CON) as well as low resistance (RON) for low-insertion
loss and bandwidth up to 650MHz (1.3Gbps). In addition to the four pairs of double-pole/double-throw (DPDT)
switches, the MAX14979E provides low-frequency (up
to 50MHz) and AUX switching that can be used for LED
lighting or other applications.
Features
S ±15kV ESD Protected per MIL-STD-883, Method
3015
S Single +3.0V to +3.6V Power-Supply Voltage
S Low On-Resistance (RON): 4I (typ), 6.5I (max)
S Low On-Capacitance (CON): 8pF (typ)
S -23dB Return Loss (100MHz)
S -3dB Bandwidth: 650MHz
S Built-In AUX Switches for Switching Indicators
S Low 450µA (max) Quiescent Current
S Bidirectional 8 to 16 Multiplexer/Demultiplexer
S Space-Saving, Lead-Free, 36-Pin, 6mm x 6mm
TQFN Package
Eye Diagram
The MAX14979E is available in a space-saving 36-pin
TQFN package and operates over the standard -40NC to
+85NC temperature range.
Applications
Notebook Computers
Switch LVDS to Graphics Panels
LVDS and LVPECL Switching
100mV/div
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX14979EETX+
-40NC to +85NC
36 TQFN-EP*
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
f = 300MHz
500ps/div
Typical Operating Circuit appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX14979E
General Description
MAX14979E
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND.)
V+..........................................................................-0.3V to +4.0V
All Other Pins................................................-0.3V to (V+ + 0.3V)
Continuous Current (COM_ _ to NC_ _/NO_ _)............. Q120mA
Continuous Current (AUX0_ to AUX1_/AUX2_)................ Q40mA
Peak Current (COM_ _ to NC_ _/NO_ _)
(pulsed at 1ms, 10% duty cycle)................................ Q240mA
Current into Any Other Pin............................................... Q20mA
Continuous Power Dissipation (TA = +70NC)
36-Pin TQFN (derate 35.7mW/NC above +70NC) .......2.85mW
ESD Protection, Human Body Model (HBM).....................Q15kV
Junction-to-Ambient Thermal Resistance
BJA (Note 1)....................................................................8NC/W
Junction-to-Case Thermal Resistance
BJC (Note 1)....................................................................1NC/W
Operating Temperature Range . ....................... -40NC to +85NC
Junction Temperature ................................................... +150NC
Storage Temperature Range .......................... -65NC to +150NC
Lead Temperature (soldering 10s) .................................+300NC
Soldering Temperature (reflow).......................................+260NC
Note 1: P
ackage thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a fourlayer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = +3.0V to +3.6V, TA = TJ = TMIN to TMAX, unless otherwise noted. Typical values are at V+ = +3.3V, TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
+3.6
V
POWER SUPPLIES
Operating Power-Supply Range
VCC
+3.0
ANALOG SWITCH
On-Resistance
On-Resistance AUX Switches
On-Resistance Match
Between Channels
On-Resistance Flatness
Off-Leakage Current
On-Leakage Current
RON
RONAUX
V+ = 3V, ICOM_ _ = -40mA,
VCOM_ _ = 0V, 1.5V, 3V
V+ = 3V, ICOM_ _ = -40mA,
VCOM_ _ = 0V, 3V (Note 3)
RFLAT(ON)
V+ = 3V, ICOM_ _ = -40mA,
VCOM_ _ = 0V, 1.5V
_(OFF)
ILCOM_
_(ON)
TMIN to TMAX
5.5
6.5
V+ = 3V, IAUX0_ = -40mA, VAUX0_ = 0V,
1.5V, 3V
DRON
ILCOM_
4
TA = +25NC
40
0.5
TA = +25NC
TMIN to TMAX
1.5
2
0.01
I
I
I
I
V+ = 3.6V, VCOM_ _ = 0.3V, 3.3V;
VNC_ _ or VNO_ _ = 3.3V, 0.3V
-1
+1
FA
V+ = 3.6V, VCOM_ _ = 0.3V, 3.3V; VNC_ _
or VNO_ _ = 3.3V, 0.3V or unconnected
-1
+1
FA
SWITCH AC PERFORMANCE
Insertion Loss
ILOS
RS = RL = 50I, unbalanced, f = 1MHz,
(Note 3)
0.6
dB
Return Loss
RLOS
f = 100MHz
-23
dB
VCT1
Any switch to any switch;
RS = RL = 50I,
unbalanced, Figure 1
Crosstalk
VCT2
f = 25MHz
-50
f = 125MHz
-26
dB
SWITCH AC CHARACTERISTICS
-3dB Bandwidth
BW
RS = RL = 50I, unbalanced
650
MHz
Off-Capacitance
COFF
f = 1MHz, COM_ _
3.5
pF
On-Capacitance
CON
f = 1MHz, COM_ _
8
pF
2
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
MAX14979E
ELECTRICAL CHARACTERISTICS (continued)
(V+ = +3.0V to +3.6V, TA = TJ = TMIN to TMAX, unless otherwise noted. Typical values are at V+ = +3.3V, TA = +25NC.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Turn-On Time
tON
VCOM_ _ = 1V, RL = 100I, Figure 2
50
ns
Turn-Off Time
tOFF
VCOM_ _ = 1V, RL = 100I, Figure 2
50
ns
Propagation Delay
Output Skew Between Ports
tPLH, tPHL
RS = RL = 50I, unbalanced, Figure 3
0.1
ns
tSK(o)
Skew between any two ports, Figure 4
0.01
ns
SWITCH LOGIC
Input-Voltage Low
VIL
V+ = 3.0V
Input-Voltage High
VIH
V+ = 3.6V
Input-Logic Hysteresis
VHYST
V+ = 3.3V
Input Leakage Current
ISEL
V+ = 3.6V, VSEL = 0V or V+
I+
V+ = 3.6V, VSEL = 0V or V+
280
ESD Protection
COM_ _, NC_ _, NO_ _
HBM (spec MIL-STD-883, Method 3015)
Q15
kV
All Other Pins
HBM (spec MIL-STD-883, Method 3015)
Q2
kV
Quiescent Supply Current
0.8
2.0
V
V
100
-5
mV
+5
FA
450
FA
ESD PROTECTION
Note 2: Specifications at TA = -40NC are guaranteed by design.
Note 3: Guaranteed by design.
MAX14979E
SINGLE-ENDED BANDWIDTH
NETWORK
ANALYZER
50Ω TRACE
SINGLE-ENDED CROSSTALK
NETWORK
ANALYZER
NETWORK
ANALYZER
50Ω TRACE
COM1+
2
50Ω TRACE
COM13
SINGLE-ENDED OFF-ISOLATION
NETWORK
ANALYZER
COM0+
36
50Ω TRACE
COM2+
7
NC0+
31
50Ω TRACE
NC1+
26
R13
49.9Ω
NC125
R14
49.9Ω
NC2+
22
50Ω TRACE
NETWORK
ANALYZER
NETWORK
ANALYZER
R15
49.9Ω
Figure 1. Single-Ended Bandwidth, Crosstalk, and Off-Isolation
3
MAX14979E
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
SEL
VIH
50%
3.0V
50%
2.0V
COM_ _
VIL
NC_ _
tON
1.0V
tPLH
tPHL
50%
50%
tOFF
tOFF
VH
0V
2.0V
NC_ _
NO_ _
tON
NO_ _
50%
VL
50%
PULSE SKEW = tSK(o) = |tPHL - tPLH|
THE MAX14979E SWITCHES ARE FULLY BIDIRECTIONAL.
0V
Figure 2. Turn-On and Turn-Off Times
Figure 3. Propagation Delay Times
3.0V
2.0V
COM_ _
1.0V
tPLH
tPHL
VOH
2.0V
NC_ _
NO_ _
VOL
tPLH
tPHL
VOH
NC_ _
NO_ _
2.0V
VOL
OUTPUT SKEW = tSK = |tPLH - tPLH| OR |tPHL - tPHL|
THE MAX14979E SWITCHES ARE FULLY BIDIRECTIONAL.
Figure 4. Output Skew
4
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
TA = -40°C
14
12
2
1
6
4
TA = +25°C
TA = -40°C
36
32
1.0
1.5
2.0
2.5
20
16
12
0
0
3.0
0.5
IL (OFF)
1.0
1.5
2.0
2.5
3.0
-40
60
85
300
280
260
-1
-2
-3
-4
-5
240
-6
220
-7
200
MAX14979E toc05
0
INSERTION LOSS (dB)
320
35
SINGLE-ENDED INSERTION LOSS
vs. FREQUENCY
MAX14979E toc04
V+ = 3.6V
10
TEMPERATURE (°C)
QUIESCENT SUPPLY CURRENT
vs. TEMPERATURE
340
IL (ON)
-15
VAUX_ (V)
VCOM_ _ (V)
QUIESCENT SUPPLY CURRENT (µA)
0.5
24
4
0
0
28
8
2
0
MAX14979E toc03
18
16
10
8
TA = +25°C
TA = +85°C
20
40
LEAKAGE CURRENT (pA)
TA = +85°C
MAX14979E toc02
22
RONLED (Ω)
4
RON (Ω)
24
MAX14979E toc01
5
3
LEAKAGE CURRENT vs. TEMPERATURE
AUX_ ON-RESISTANCE vs. VAUX_
ON-RESISTANCE vs. VCOM_ _
6
-8
-40
-15
10
35
TEMPERATURE (°C)
60
85
1
10
100
1000
FREQUENCY (MHz)
5
MAX14979E
Typical Operating Characteristics
(V+ = 3.3V, TA = +25NC, unless otherwise noted.)
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
SEL
NC1+
NC1-
NO1+
NO1-
NC2+
NC2-
NO2+
NO2-
27
26
25
24
23
22
21
20
19
TOP VIEW
NO0-
28
18
NC3+
NO0+
29
17
NC3-
NC0-
30
16
NO3+
NC0+
31
15
NO3-
AUX2
32
14
AUX2A
AUX1
33
13
AUX1A
AUX0
34
12
AUX0B
V+
35
11
GND
COM0+
36
10
COM3-
MAX14979E
EP
3
4
5
6
7
8
9
AUX0A
AUX1B
AUX2B
COM2+
COM2-
COM3+
2
COM1-
1
COM0-
+
COM1+
MAX14979E
Pin Configuration
TQFN
(6mm × 6mm)
Pin Description
6
PIN
NAME
1
COM0-
Common LVDS Differential Terminal for Switch 0
FUNCTION
2
COM1+
Common LVDS Differential Terminal for Switch 1
3
COM1-
Common LVDS Differential Terminal for Switch 1
4
AUX0A
AUX0A Input
5
AUX1B
AUX1B Output. Drive SEL low (SEL = 0) to connect AUX0A to AUX1B.
6
AUX2B
AUX2B Output. Drive SEL high (SEL = 1) to connect AUX0A to AUX2B.
7
COM2+
Common LVDS Differential Terminal for Switch 2
8
COM2-
Common LVDS Differential Terminal for Switch 2
9
COM3+
Common LVDS Differential Terminal for Switch 3
10
COM3-
Common LVDS Differential Terminal for Switch 3
11
GND
12
AUX0B
AUX0B Input
13
AUX1A
AUX1A Output. Drive SEL low (SEL = 0) to connect AUX0B to AUX1A.
14
AUX2A
AUX2A Output. Drive SEL high (SEL = 1) to connect AUX0B to AUX2A.
Ground
15
NO3-
Normally Open LVDS Differential Terminal for Switch 3
16
NO3+
Normally Open LVDS Differential Terminal for Switch 3
17
NC3-
Normally Closed LVDS Differential Terminal for Switch 3
18
NC3+
Normally Closed LVDS Differential Terminal for Switch 3
19
NO2-
Normally Open LVDS Differential Terminal for Switch 2
20
NO2+
Normally Open LVDS Differential Terminal for Switch 2
21
NC2-
Normally Closed LVDS Differential Terminal for Switch 2
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
PIN
NAME
22
NC2+
Normally Closed LVDS Differential Terminal for Switch 2
23
NO1-
Normally Open LVDS Differential Terminal for Switch 1
24
NO1+
Normally Open LVDS Differential Terminal for Switch 1
25
NC1-
Normally Closed LVDS Differential Terminal for Switch 1
26
NC1+
Normally Closed LVDS Differential Terminal for Switch 1
27
SEL
Select Input. SEL selects switch connection. See Table1.
28
NO0-
Normally Open LVDS Differential Terminal for Switch 0
29
NO0+
Normally Open LVDS Differential Terminal for Switch 0
30
NC0-
Normally Closed LVDS Differential Terminal for Switch 0
31
NC0+
Normally Closed LVDS Differential Terminal for Switch 0
32
AUX2
AUX2 Output. Drive SEL high (SEL = 1) to connect AUX0 to AUX2.
33
AUX1
AUX1 Output. Drive SEL low (SEL = 0) to connect AUX0 to AUX1.
34
AUX0
AUX0 Input
35
V+
36
COM0+
—
EP
FUNCTION
Positive-Supply Voltage Input. Bypass V+ to GND with a 0.1FF ceramic capacitor.
Common LVDS Differential Terminal for Switch 0
Exposed Pad. Connect exposed pad to GND or leave it unconnected.
Detailed Description
The MAX14979E is a high-speed analog switch targeted
at LVDS and other low-voltage switching up to 600MHz.
In a typical application, the MAX14979E switches two
sets of LVDS sources to a laptop LVDS panel. For extra
security, the MAX14979E is protected against Q15kV
ESD shocks. See the Functional Diagram.
With its low resistance and capacitance, as well as highESD protection, the MAX14979E can be used to switch
most low-voltage differential signals, such as LVDS and
LVPECL, as long as the signals do not exceed the maximum ratings of the device.
The MAX14979E switches provide low capacitance and
on-resistance to meet low insertion loss and return-loss
specifications. The MAX14979E has three additional
AUX switches.
Digital Control Inputs
The MAX14979E provides a single digital control SEL.
SEL controls the switches as well as the AUX switches,
as shown in Table 1.
switches are bidirectional, allowing COM_ _ and NC_ _/
NO_ _ to be configured as either inputs or outputs.
ESD Protection
The MAX14979E is characterized using the HBM for
Q15kV of ESD protection. Figure 5 shows the HBM. This
model consists of a 100pF capacitor charged to the ESD
voltage of interest, which is then discharged into the test
device through a 1.5kI resistor. All signal and control
pins are ESD protected to Q15kV HBM.
RC
1MΩ
CHARGE-CURRENT
LIMIT RESISTOR
HIGHVOLTAGE
DC
SOURCE
Cs
100pF
RD
1500Ω
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
DEVICE
UNDER
TEST
Analog-Signal Levels
The on-resistance of the MAX14979E is very low and
stable as the analog input signals are swept from ground
to V+ (see the Typical Operating Characteristics). The
Figure 5. Human Body ESD Test Model (MIL-STD-883, Method
3015)
7
MAX14979E
Pin Description (continued)
MAX14979E
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
Applications Information
Functional Diagram
Typical Operating Circuit
COM0+
NC0+
COM0-
NC0NO0+
NO0-
COM1+
NC1+
COM1-
NC1NO1+
NO1-
COM2+
NC2+
COM2-
NC2NO2+
NO2-
COM3+
NC3+
COM3-
NC3-
The Typical Operating Circuit shows the MAX14979E in
a dual graphics application.
Power-Supply Sequencing and
Overvoltage Protection
Caution: Do not exceed the absolute maximum ratings.
Stresses beyond the listed ratings may cause permanent
damage to the device.
Proper power-supply sequencing is recommended for
all CMOS devices. Always apply V+ before applying
analog signals, especially if the analog signal is not current limited.
Layout
High-speed switches require proper layout and design
procedures for optimum performance. Keep designcontrolled-impedance PCB traces as short as possible.
Ensure that bypass capacitors are as close as possible
to the device. Use large ground planes where possible.
NO3+
NO3AUX0A
AUX1A
Chip Information
PROCESS: BiCMOS
AUX2A
AUX0B
AUX2B
AUX0
AUX1
AUX2
SEL
MAX14979E
Table 1. Truth Table
8
Package Information
AUX1B
SEL
CONNECTION
0
COM_ _ to NC_ _, AUX0_ to AUX1_
1
COM_ _ to NO_ _, AUX0_ to AUX2_
For the latest package outline information and land patterns,
go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package
drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
PACKAGE TYPE
PACKAGE CODE
DOCUMENT NO.
36 TQFN-EP
T3666+3
21-0141
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
MAX14979E
LVDS_+
LVDS_LVDS_+
LVDS_LVDS_+
LVDS_CLOCK_+
CLOCK_-
NO0+
NO0NO1+
NO1NO2+
NO2NO3+
NO3-
COM0+
COM0-
COM1+
COM1-
INTERNAL
GRAPHICS
LVDS_+
LVDS_LVDS_+
LVDS_LVDS_+
LVDS_CLOCK_+
CLOCK_-
COM2+
COM2-
NC0+
NC0NC1+
NC1NC2+
NC2NC3+
NC3-
COM3+
COM3-
SEL
CONTROL
LVDS
LCD
PANEL
MAX14979E
LVDS_+
LVDS_LVDS_+
LVDS_LVDS_+
LVDS_CLOCK_+
CLOCK_-
NO0+
NO0NO1+
NO1NO2+
NO2NO3+
NO3-
COM0+
COM0-
COM1+
COM1-
SVDO TO LVDS
LVDS_+
LVDS_LVDS_+
LVDS_LVDS_+
LVDS_CLOCK_+
CLOCK_-
COM2+
COM2-
NC0+
NC0NC1+
NC1NC2+
NC2NC3+
NC3-
COM3+
COM3-
SEL
CONTROL
NOTE: THE MAX14979E HAS THREE SPDT AUXILLIARY SWITCHES (AUX) THAT CAN BE USED FOR OTHER SWITCHING SUCH AS LEDs AND I2C. THESE ARE NOT SHOWN IN THE DIAGRAM.
9
MAX14979E
Typical Operating Circuit
MAX14979E
High-Bandwidth, ±15kV ESD Protection
LVDS Switch
Revision History
REVISION
NUMBER
REVISION
DATE
0
4/10
DESCRIPTION
Initial release
PAGES
CHANGED
—
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
10
©
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
2010 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
Similar pages