Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Lxx08xx & Qxx08xx & Qxx08xHx Series ® Description 8 Amp bi-directional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type devices guarantee gate control in Quadrants I & IV needed for digital control circuitry. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Agency Approval Agency Features & Benefits • RoHS compliant Agency File Number • Glass – passivated junctions L Package: E71639 ® • Voltage capability up to 1000 V Main Features Symbol IT(RMS) VDRM /VRRM IGT (Q1) Value Unit 8 A 400 to 1000 V 5 to 50 mA • Surge capability up to 100 A • Electrically isolated “L-Package” is UL recognized for 2500Vrms • Solid-state switching eliminates arcing or Schematic Symbol contact bounce that create voltage transients • No contacts to wear out from reaction of switching events • Restricted (or limited) RFI generation, depending on activation point of sine wave • Requires only a small gate activation pulse in each half-cycle Applications MT2 Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. MT1 Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. G Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Lxx08xx & Qxx08xx & Qxx08xHx Series 75 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Absolute Maximum Ratings — Sensitive Triac (4 Quadrants) Symbol Parameter RMS on-state current (full sine wave) IT(RMS) ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I2t I2t Value for fusing Lxx08Ly TC = 80°C Lxx08Ry / Lxx08Vy / Lxx08Dy TC = 85°C Value Unit 8 A f = 50 Hz t = 20 ms 65 f = 60 Hz t = 16.7 ms 85 tp = 8.3 ms A 26.5 A2s di/dt Critical rate of rise of on-state current IG = 50mA with 0.1µs rise time f = 120 Hz TJ = 110°C 70 A/μs IGTM Peak gate trigger current tp ≤ 10 μs TJ = 110°C 1.6 A PG(AV) Average gate power dissipation TJ = 110°C 0.4 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 110 °C Tstg TJ Note: xx = voltage, y = sensitivity Absolute Maximum Ratings — Standard Triac Symbol Parameter RMS on-state current (full sine wave) IT(RMS) ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) I 2t I2t Value for fusing Unit 8 A Qxx08Ry / Qxx08Ny TC = 95°C Qxx08Ly TC = 90°C f = 50 Hz t = 20 ms 83 f = 60 Hz t = 16.7 ms 100 A2s TJ = 125°C 70 A/μs TJ = 125°C 1.8 A TJ = 125°C 0.5 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C Critical rate of rise of on-state current IG = 200mA with ≤ 0.1µs rise time IGTM Peak gate trigger current PG(AV) Average gate power dissipation Tstg tp = 8.3 ms A 41 di/dt TJ Value f = 120 Hz tp ≤ 10 μs; IGT ≤ TGTM Note: xx = voltage, y = sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 76 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Absolute Maximum Ratings — Alternistor (3 Quadrants) Symbol Parameter RMS on-state current (full sine wave) IT(RMS) Qxx08LHy TC = 90°C Qxx08RHy / Qxx08NHy Qxx08VHy / Qxx08DHy TC = 95°C f = 50 Hz ITSM t = 20 ms Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 60 Hz I2t I2t Value for fusing di/dt tp = 8.3 ms Critical rate of rise of on-state current tP ≤ 10 μs; IGT ≤ IGTM Average gate power dissipation PG(AV) 8 A Qxx08VHy / Qxx08DHy 80 Qxx08LHy / Qxx08RHy / Qxx08NHy 83 Qxx08VHy / Qxx08DHy 85 Qxx08LHy / Qxx08RHy / Qxx08NHy 100 Qxx08VHy / Qxx08DHy 30 A A 2s 41 TJ = 125°C 70 Qxx08VHy / Qxx08DHy 1.6 Qxx08LHy / Qxx08RHy / Qxx08NHy 2.0 IGT = 10mA Qxx08VHy / Qxx08DHy 0.4 IGT = 35mA Qxx08LHy / Qxx08RHy / Qxx08NHy TJ = 125°C TJ = 125°C A/μs A W 0.5 Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C Tstg TJ Unit Qxx08LHy / Qxx08RHy / Qxx08NHy f = 120 Hz Peak gate trigger current IGTM t = 16.7 ms Value Note: xx = voltage, y = sensitivity Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive Triac (4 Quadrants) Symbol IGT Test Conditions Quadrant VD = 12V RL = 60 Ω VGT VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C IH IT = 100mA dv/dt VD = VDRM Gate Open TJ = 100°C (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 110°C tgt IG = 100mA PW = 15µs IT = 11.3 A(pk) Lxx08x6 Lxx08x8 Unit 5 10 10 20 mA I – II – III IV MAX. ALL MAX. 1.3 V ALL MIN. 0.2 V MAX. 400V 600V 10 20 mA 30 40 20 30 TYP. 2 2 V/μs TYP. 3.0 3.2 μs TYP. V/μs Note: xx = voltage, x = package, y = sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 77 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard Triac Symbol IGT Test Conditions Quadrant VD = 12V RL = 60 Ω VGT VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C IH IT = 200mA Qxx08x4 Qxx08x5 Unit 25 50 50 75 mA I – II – III IV MAX. TYP. I – II – III MAX. 1.3 V ALL MIN. 0.2 V MAX. 50 400V dv/dt 600V VD = VDRM Gate Open TJ = 125°C 800V 50 mA 150 125 MIN. V/μs 100 1000V 80 (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 125°C TYP. 4 4 V/μs tgt IG = 100mA PW = 15µs IT = 11.3 A(pk) TYP. 3.0 3.0 μs Qxx08xH3 Qxx08xH4 Unit 10 35 mA Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac (3 Quadrants) Symbol IGT Test Conditions Quadrant VD = 12V RL = 60 Ω VGT VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C IH IT = 100mA I – II – III MAX. I – II – III MAX. 1.3 V I – II – III MIN. 0.2 V MAX. Qxx08LHy / Qxx08RHy / Qxx08NHy dv/dt VD = VDRM Gate Open TJ = 125°C MIN. Qxx08VHy / Qxx08DHy 15 35 400V 75 400 600V 50 300 800V 200 1000V 100 400V 75 450 600V 50 350 800V 250 1000V 150 mA V/μs (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 125°C MIN. 20 25 V/μs tgt IG = 100mA PW = 15µs IT = 11.3 A(pk) TYP. 4.0 4.0 μs Note : xx = voltage, x = package, y = sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 78 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Static Characteristics Symbol Test Conditions ITM = 11.3A tp = 380 µs VTM Lxx08xy Qxx08xy IDRM VDRM = VRRM IRRM Unit 1.60 V TJ = 25°C 400 - 600V 20 μA TJ = 110°C 400 - 600V 0.5 mA TJ = 25°C 400 - 1000V 50 μA TJ = 125°C 400 - 800V 2 TJ = 100°C 1000V MAX. mA 3 400 - 800V 10 1000V 20 TJ = 125°C 400 - 800V 2 TJ = 100°C 1000V 3 TJ = 25°C Qxx08xHy MAX. Value μA mA Thermal Resistances Symbol Parameter Junction to case (AC) Rθ(J-C) Junction to ambient Rθ(J-A) Value L/Qxx08Ryy / L/Qxx08Nyy 1.5 L/Qxx08Lyy 2.8 L/Qxx08Vyy 2.1 L/Qxx08Ryy 45 L/Qxx08Lyy 50 L/Qxx08Vyy 64 Unit °C/W °C/W Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Figure 2: N ormalized DC Gate Trigger Current for All Quadrants vs. Junction Temperature Figure 1: Definition of Quadrants ALL POLARITIES ARE REFERENCED TO MT1 + (+) I GT GATE MT1 I GT REF (-) MT1 I GT GATE (+) MT1 REF REF QII QI QIII QIV MT2 3.0 IGT I GT GATE 3.5 MT2 - + IGT MT2 2.5 2.0 1.5 1.0 0.5 I GT GATE MT2 NEGATIVE (Negative Half Cycle) IGT (TJ = 25°C) (-) MT2 POSITIVE (Positive Half Cycle) Ratio of MT2 0.0 -65 MT1 -40 -15 10 35 60 85 110 Junction Temperature (TJ)- ºC REF NOTE: Alternistors will not operate in QIV Note: Alternistors will not operate in QIV Lxx08xx & Qxx08xx & Qxx08xHx Series 79 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 125 Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: N ormalized DC Gate Trigger Voltage for All Quadrants vs. Junction Temperature 3.5 2.0 VGT 2.0 1.5 VGT (TJ = 25°C) 2.5 1.5 1.0 Ratio of IH Ratio of IH (TJ = 25°C) 3.0 1.0 0.5 0.5 0.0 0.0 -65 -40 -15 10 35 60 85 110 -65 125 -40 -15 35 60 85 110 125 Figure 6: M aximum Allowable Case Temperature vs. On-State Current (Sensitive Triac) 18 110 16 105 Lxx08Vy Lxx08Dy Lxx08Ry 100 14 Maximum Allowable Case Temperature (TC) - °C Average On-State Power Dissipation (PD(AV)) - Watts Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 12 10 8 6 4 95 90 Lxx08Ly 85 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawings 75 70 65 2 60 0 0 2 4 6 8 10 0 1 2 RMS On-State Current (IT(RMS)) - Amps 3 4 5 6 7 8 RMS On-State Current (IT(RMS)) - Amps Figure 7: M aximum Allowable Case Temperature vs. On-State Current (Standard / Alternistor Triac) Figure 8: O n-State Current vs. On-State Voltage (Typical) 20 Postitive or Negative Instantaneous On-State Current (iT) - Amps 130 Qxx08Ryy Qxx08Nyy Qxx08Vyy Qxx08Dyy 120 Maximum Allowable Case Temperature (TC) - °C 10 Junction Temperature (TJ)- ºC Junction Temperature (TJ)- ºC 110 100 Qxx08Lyy 90 80 70 TC = 25°C 16 12 8 4 0 60 0 1 2 3 4 5 6 7 8 0.6 0.8 1.0 1.2 1.4 Postitive or Negative Instantaneous On-State Voltage (vT) - Volts RMS On-State Current (IT(RMS)) - Amps Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 80 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 1.6 Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 9: Maximum Allowable Ambient Temperature vs. On-State Current Maximum Allowable Ambient Temperature (TA) - °C 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 FREE AIR RATING - NO HEATSINK 100 80 L/Qxx08Lyy L/Qxx08Ryy 60 L/Qxx08Vyy 40 20 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 RMS On-State Current (IT(RMS)) - Amps Figure 10: Surge Peak On-State Current vs. Number of Cycles 100 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps L/Qxx08Ryy L/Qxx08Lyy L/Qxx08Nyy L/Qxx08Vyy L/Qxx08Dyy Notes: 1. G ate control may be lost during and immediately following surge current interval. 2. O verload may not be repeated until junction temperature has returned to steady-state rated value. 10 1 1 10 100 1000 Surge Current Duration- Full Cycles Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 81 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Terminal Finish Ramp-up TL tL TS(max) Preheat TS(min) 25 Peak Temperature (TP) tP TP Temperature Reflow Condition tS time to peak temperature Time Environmental Specifications Test 100% Matte Tin-plated AC Blocking (VDRM) Body Material UL recognized epoxy meeting flammability classification 94V-0 Terminal Material Copper Alloy Temperature Cycling Temperature/ Humidity Design Considerations High Temp Storage Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage Lxx08xx & Qxx08xx & Qxx08xHx Series Ramp-do Ramp-down 82 Revised: June 24, 2011 04:57 PM Thermal Shock Autoclave Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150°C 1008 hours; -40°C MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead TC MEASURING POINT O A E AREA (REF.) 0.17 IN2 Dimension 8.13 .320 P MT2 B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G L H K N J Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). M MT1 MT2 GATE Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 Min Max Min Max Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab TC MEASURING POINT O A E P Dimension 8.13 .320 B C 13.36 .526 D 7.01 .276 F R G L H K N J MT1 MT2 GATE Lxx08xx & Qxx08xx & Qxx08xHx Series M Inches AREA (REF.) 0.17 IN2 Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). 83 Revised: June 24, 2011 04:57 PM Millimeters A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1.52 1.91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1.14 1.52 R 0.038 0.048 0.97 1.22 ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount TC MEASURING POINT B AREA: 0.11 IN2 C V Dimension E MT2 7.01 .276 A 8.41 .331 S W U MT1 G J K GATE 8.13 .320 H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 1.40 .055 3.81 .150 Inches Min Millimeters Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1.14 1.52 F 0.060 0.075 1.52 1.91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1.14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1.02 1.78 2.03 .080 6.60 .260 Dimensions — TO-251AA (V-Package) — V-PAK Through Hole TC MEASURING POINT MT2 E H D AREA: 0.040 IN2 Dimension 5.28 .208 J A 5.34 .210 B R P Q S K C MT1 MT2 GATE F L G I Lxx08xx & Qxx08xx & Qxx08xHx Series 84 Revised: June 24, 2011 04:57 PM Inches Millimeters Min Typ Max Min Typ Max A 0.040 0.044 0.050 1.02 1.11 1.27 B 0.235 0.242 0.245 5.97 6.15 6.22 C 0.350 0.361 0.375 8.89 9.18 9.53 D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.66 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.34 2.41 I 0.176 0.180 0.184 4.47 4.57 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.01 1.12 L 0.018 0.020 0.023 0.46 0.52 0.58 P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 R 0.034 0.039 0.044 0.86 1.00 1.11 S 0.074 0.079 0.084 1.86 2.00 2.11 ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount MT2 E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension 6.71 .264 5.34 .210 C P Q MT1 GATE F MT2 1.60 .063 1.80 .071 AREA : 0.040 IN2 3 .118 G 4.60 .181 I O L K J H M N Lxx08xx & Qxx08xx & Qxx08xHx Series 85 Revised: June 24, 2011 04:57 PM Millimeters Typ Max Min Typ Max A 0.040 0.043 0.050 1.02 1.09 1.27 B 0.235 0.243 0.245 5.97 6.16 6.22 C 0.106 0.108 0.113 2.69 2.74 2.87 A B Inches Min D 0.205 0.208 0.213 5.21 5.29 5.41 E 0.255 0.262 0.265 6.48 6.65 6.73 F 0.027 0.031 0.033 0.69 0.80 0.84 G 0.087 0.090 0.093 2.21 2.28 2.36 H 0.085 0.092 0.095 2.16 2.33 2.41 I 0.176 0.179 0.184 4.47 4.55 4.67 J 0.018 0.020 0.023 0.46 0.51 0.58 K 0.038 0.040 0.044 0.97 1.02 1.12 L 0.018 0.020 0.023 0.46 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 N 0.021 0.026 0.027 0.53 0.67 0.69 O 0° 0° 5° 0° 0° 5° P 0.042 0.047 0.052 1.06 1.20 1.32 Q 0.034 0.039 0.044 0.86 1.00 1.11 ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Product Selector Part Number Voltage (xx) Gate Sensitivity Quadrants Type Package 10 mA Sensitive Triac TO-220L 5 mA 10 mA Sensitive Triac TO-252 D-PAK X 5mA 10mA Sensitive Triac TO-220R X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK Lxx08L8 X X 10 mA 20 mA Sensitive Triac TO-220L Lxx08D8 X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK Lxx08R8 X X 10mA 20mA Sensitive Triac TO-220R Lxx08V8 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK Qxx08RH3 X X 10 mA Alternistor Triac TO-220R Qxx08VH3 X X 10 mA Alternistor Triac TO-251 V-PAK Qxx08DH3 X X 10 mA Alternistor Triac TO-252 D-PAK Qxx08L4 X 25 mA Triac TO-220L Qxx08R4 X 25 mA Triac TO-220R Qxx08N4 X 25 mA Triac TO-263 D²-PAK Qxx08LH4 X X X X 35 mA Alternistor Triac TO-220L Qxx08RH4 X X X X 35 mA Alternistor Triac TO-220R Qxx08VH4 X X X X 35 mA Alternistor Triac TO-251 V-PAK Qxx08DH4 X X X X 35 mA Alternistor Triac TO-252 D-PAK Qxx08NH4 X X X X 35 mA Alternistor Triac TO-263 D²-PAK Qxx08L5 X X X 50 mA Triac TO-220L Qxx08R5 X X X 50 mA Triac TO-220R Qxx08N5 X X X 50 mA Triac TO-263 D²-PAK 400V 600V Lxx08L6 X Lxx08D6 800V 1000V I – II – III IV X 5 mA X X Lxx08R6 X Lxx08V6 Packing Options Part Number Marking Weight Packing Mode Base Quantity L/Qxx08L/Ryy L/Qxx08L/Ryy 2.2 g Bulk 500 L/Qxx08L/RyyTP L/Qxx08L/Ryy 2.2 g Tube Pack 500 (50 per tube) Qxx08NyyTP Qxx08Nyy 1.6 g Tube 500 (50 per tube) Qxx08NyyRP Qxx08Nyy 1.6 g Embossed Carrier 500 L/Qxx08DyyTP L/Qxx08Dyy 0.3 g Tube 750 (75 per tube) L/Qxx08DyyRP L/Qxx08Dyy 0.3 g Embossed Carrier 2500 L/Qxx08VyyTP L/Qxx08Vyy 0.4 g Tube 750 (75 per tube) Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Lxx08xx & Qxx08xx & Qxx08xHx Series 86 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards * Cover tape 0.315 (8.0) MT1 XXXXXX DC 0.059 Dia (1.5) XX DC XX XXXXXX * XX 0.524 (13.3) XXXXXX 0.63 (16.0) DC Gate XXXXXX 0.157 (4.0) MT2 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 0.64 (16.3) Direction of Feed TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) 0.059 DIA (1.5) 0.945 (24.0) 0.827 (21.0) Gate MT1 * * Cover tape MT2 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed Lxx08xx & Qxx08xx & Qxx08xHx Series 87 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Part Numbering System Part Marking System Q 60 08 L 5 56 CURRENT 08: 8A SENSITIVITY & TYPE Sensitive Triac: 6 : 5 mA (QI, II, III) 10 mA (QIV) 8 : 10 mA (QI, II, III) 20 mA (QIV) Standard Triac: 4 : 25 mA (QI, II, III) 5 : 50 mA (QI, II, III) Alternistor Triac: H3 : 10 mA (QI, II, III) H4 : 35 mA (QI, II, III) Q6008R5 YM ® ® VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V YMLDD LEAD FORM DIMENSIONS xx : Lead Form Option ® Q6008L5 PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D2PAK) V : TO-251 (VPAK) D : TO-252 (DPAK) MY ® ® Lxx08xx & Qxx08xx & Qxx08xHx Series 88 Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. L6008V5 DEVICE TYPE L : Sensitive Triac Q : Triac or Alternistor TO-252AA – (D Package) TO-251AA – (V Package)