APT8011JFLL
800V 51A 0.110W
POWER MOS 7TM
FREDFET
• Lower Input Capacitance
• Lower Miller Capacitance
• Lower Gate Charge, Qg
Symbol
VDSS
ID
27
2
T-
D
G
SO
"UL Recognized"
ISOTOP ®
• Increased Power Dissipation
• Easier To Drive
• Popular SOT-227 Package
• FAST RECOVERY BODY DIODE
MAXIMUM RATINGS
S
S
Power MOS 7TM is a new generation of low loss, high voltage, N-Channel
enhancement mode power MOSFETS. Both conduction and switching
losses are addressed with Power MOS 7TM by significantly lowering RDS(ON)
and Qg. Power MOS 7TM combines lower conduction and switching losses
along with exceptionally fast switching speeds inherent with APT's
patented metal gate structure.
D
G
S
All Ratings: TC = 25°C unless otherwise specified.
Parameter
APT8011JFLL
UNIT
800
Volts
Drain-Source Voltage
51
Continuous Drain Current @ TC = 25°C
1
Amps
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage Continuous
±30
Gate-Source Voltage Transient
±40
Total Power Dissipation @ TC = 25°C
690
Watts
Linear Derating Factor
5.52
W/°C
VGSM
PD
TJ,TSTG
204
Lead Temperature: 0.063" from Case for 10 Sec.
IAR
Avalanche Current
EAR
Repetitive Avalanche Energy
EAS
-55 to 150
Operating and Storage Junction Temperature Range
TL
1
°C
300
51
(Repetitive and Non-Repetitive)
1
Single Pulse Avalanche Energy
Volts
Amps
50
4
mJ
3600
STATIC ELECTRICAL CHARACTERISTICS
BVDSS
ID(on)
RDS(on)
IDSS
IGSS
VGS(th)
Characteristic / Test Conditions
MIN
Drain-Source Breakdown Voltage (VGS = 0V, I D = 250µA)
800
Volts
51
Amps
On State Drain Current
2
(VDS > I D(on) x R DS(on) Max, VGS = 10V)
Drain-Source On-State Resistance
2
(VGS = 10V, 0.5 ID[Cont.])
TYP
MAX
0.110
Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V)
250
UNIT
Ohms
µA
Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125°C)
1000
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
±100
nA
5
Volts
Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
3
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
USA
405 S.W. Columbia Street
Bend, Oregon 97702-1035
Phone: (541) 382-8028
FAX: (541) 388-0364
EUROPE
Chemin de Magret
F-33700 Merignac - France
Phone: (33) 5 57 92 15 15
FAX: (33) 5 56 47 97 61
050-7094 Rev - 9-2001
Symbol
APT8011JFLL
DYNAMIC CHARACTERISTICS
Symbol
Test Conditions
Characteristic
MIN
TYP
Ciss
Input Capacitance
VGS = 0V
10020
Coss
Output Capacitance
VDS = 25V
1930
Crss
Reverse Transfer Capacitance
f = 1 MHz
317
VGS = 10V
369
VDD = 0.5 VDSS
ID = ID [Cont.] @ 25°C
48
209
VGS = 15V
23
VDD = 0.5 VDSS
23
ID = ID [Cont.] @ 25°C
83
RG = 0.6W
19
Qg
Total Gate Charge
3
Qgs
Gate-Source Charge
Qgd
Gate-Drain ("Miller") Charge
t d(on)
tr
t d(off)
tf
Turn-on Delay Time
Rise Time
Turn-off Delay Time
Fall Time
MAX
UNIT
pF
nC
ns
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol
IS
Characteristic / Test Conditions
MIN
TYP
51
Continuous Source Current (Body Diode)
ISM
Pulsed Source Current
1
VSD
Diode Forward Voltage
2
dv/
dt
Peak Diode Recovery dv/dt
MAX
204
(Body Diode)
UNIT
Amps
(VGS = 0V, IS = -ID [Cont.])
1.3
Volts
5
18
V/ns
t rr
Reverse Recovery Time
(IS = -ID [Cont.], di/dt = 100A/µs)
Tj = 25°C
560
Tj = 125°C
1600
Q rr
Reverse Recovery Charge
(IS = -ID [Cont.], di/dt = 100A/µs)
Tj = 25°C
2.5
Tj = 125°C
17.7
IRRM
Peak Recovery Current
(IS = -ID [Cont.], di/dt = 100A/µs)
Tj = 25°C
16.1
Tj = 125°C
36.2
ns
µC
Amps
THERMAL CHARACTERISTICS
Symbol
Characteristic
RqJC
Junction to Case
RqJA
Junction to Ambient
MIN
TYP
MAX
UNIT
0.18
40
1 Repetitive Rating: Pulse width limited by maximum junction
°C/W
3 See MIL-STD-750 Method 3471
4 Starting T = +25°C, L = 2.77mH, R = 25W, Peak I = 51A
temperature.
j
G
L
2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2%
5 dv/ numbers reflect the limitations of the test circuit rather than the
dt
device itself. IS £ -ID[Cont.] di/dt £ 700A/µs VR £ VDSS TJ £ 150°C
APT Reserves the right to change, without notice, the specifications and information contained herein.
SOT-227 (ISOTOP®) Package Outline
11.8 (.463)
12.2 (.480)
31.5 (1.240)
31.7 (1.248)
7.8 (.307)
8.2 (.322)
r = 4.0 (.157)
(2 places)
25.2 (0.992)
0.75 (.030) 12.6 (.496) 25.4 (1.000)
0.85 (.033) 12.8 (.504)
4.0 (.157)
4.2 (.165)
(2 places)
1.95 (.077)
2.14 (.084)
3.3 (.129)
3.6 (.143)
050-7094 Rev - 9-2001
8.9 (.350)
9.6 (.378)
Hex Nut M4
(4 places)
W=4.1 (.161)
W=4.3 (.169)
H=4.8 (.187)
H=4.9 (.193)
(4 places)
14.9 (.587)
15.1 (.594)
* Source
Drain
30.1 (1.185)
30.3 (1.193)
* Source terminals are shorted
internally. Current handling
capability is equal for either
Source terminal.
38.0 (1.496)
38.2 (1.504)
* Source
Gate
Dimensions in Millimeters and (Inches)
APT's devices are covered by one or more of the following U.S.patents: 4,895,810
5,256,583
5,045,903
4,748,103
5,089,434
5,283,202
5,182,234
5,231,474
5,019,522
5,434,095
5,262,336
5,528,058