GB351N thru GB356N ® Pb GB351N thru GB356N Pb Free Plating Product 35.0 Ampere Heatsink Block Automotive Rectifier Diodes TO-230/BLOCK Features: Low leakage Low forward voltage drop High current capability High forward surge current capability Mechanical Data: Technology: Glass Passivation Pellet/Clip Bonding Case: Sintered temperature < 260oC Polarity: As marked on body. (Note2) Lead: Plated lead, solderable per MIL-STD-202E method 208C Mounting: BLOCK/TO-230 package type Application: Block Diode/Alternator Diode Stack Silicon Diffused Diode alternative Special for Car AC Alternator rectifier application Unit:mm Case Case Positive Suffix:"P" Negative Suffix:"N" Lead Lead Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. Parameters Symbols GB351N GB352N GB353N GB354N GB356N Maximum repetitive peak reverse voltage VRRM Maximum RMS voltage VRMS 70 140 Maximum DC blocking voltage V DC 100 200 o Maximum Average rectified forward current at TC=105 C I(AV) Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t<8.3mS) Maximum instantaneous forward voltage drop at 100A Maximum DC reverse current at rated DC blocking voltage TA=25oC TA=100oC Typical thermal resistance Operating and storage temperature range Notes: 100 200 300 Units 400 600 Volts 210 280 420 Volts 300 400 600 Volts 35 Amps IFSM 500 Amps I2t 1038 A 2S VF 1.10 Volts IR 5.0 450 RθJL 0.8 TJ, TSTG -65 to +175 uA o C/W o C 1. Enough heatsink must be considered in application. 2. Suffix "N" is for lead Negative.Suffix "P" is for lead Positive. Rev.04/2014 © 2006 Thinki Semiconductor Co.,Ltd. Page 1/2 http://www.thinkisemi.com/ GB351N thru GB356N ® Ratings and Characteristic Curves Rev.04/2014 © 2006 Thinki Semiconductor Co.,Ltd. Page 2/2 http://www.thinkisemi.com/