MICROCIRCUIT DATA SHEET Original Creation Date: 08/06/98 Last Update Date: 08/18/99 Last Major Revision Date: 08/06/98 MNCLC505A-X REV 0A0 HIGH-SPEED, PROGRAMMABLE-SUPPLY CURRENT, MONOLITHIC OP AMP General Description The CLC505 is a monolithic, high-speed op amp with a unique combination of high performance, low power consumption, and flexibility of operation. With a 10 to 1 range of supply current programmability (not preset currents, but rather a continuous range "programmed" with a single external resistor, (Rp), this amplifier can be used in a wide variety of high-performance applications. Performance (typical) at any supply current is exceptional. Even at 10mW power consumption, the CLC505 provides performance far beyond other monolithic op amps, many of which consume nearly 100 times as much power. The CLC505's combination of high performance, low power consumption, and large signal performance makes the CLC505 ideal for many demanding applications in which power consumption must be minimized. Examples include a variety of remote site equipment such as battery-powered test instrumentation and communications gear. Power is also critical in applications requiring many channels, such as video switching matrices, ATE, and phased-array radar systems. Industry Part Number NS Part Numbers CLC505A CLC505AJ-QML Prime Die VB1929B Controlling Document 5962-9099301MPA Processing Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 MIL-STD-883, Method 5004 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Features - 10mW power consumption with 50MHz BW Single-resistor programming of supply current 3.4 mA Icc provides 100Mhz bandwidth and 14ns settling (0.05%) Fast disable capability 0.04% differential gain at Icc = 3.4mA 0.06% differential phase at Icc = 3.4mA Applications - Low-power/battery applications Remote site instrumentation Mobile communications gear Video switching matrix Phased-array radar 2 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vs) +7V dc Output Current (Iout) 70mA Common Mode Input Voltage (Vcm) +7V dc Differential Input Voltage (Vid) 10V dc Power Dissipation (Pd) (Note 2) 1.2W Junction Temperature +175 C Storage Temperature Range -65 C to +150 C Lead Temperature (soldering, 10 seconds) +300 C Thermal Resistance Junction-to-ambient (ThetaJA) Ceramic DIP (Still Air) (500 LFPM) Junction-to-case (ThetaJC) Ceramic DIP Package Weight (Typical) CERAMIC DIP ESD Tolerance (Note 3) TBD TBD TBD TBD 2000V Note 1: Note 2: Note 3: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA) /ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. Human body model, 100pF discharged through 1.5k Ohms. 3 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Recommended Operating Conditions Supply Voltage (Vs) +5V dc Gain Range (Av) +2 to +21 and -1 to -20 Ambient Operating Temperature Range (Ta) -55 C to +125 C 4 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL +Iin PARAMETER Input Bias Current (noninverting) CONDITIONS NOTES Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms -Iin Input Bias Current (inverting) Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Rp = 100kOhms, 500Ohms Vio Input Offset Voltage Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, Rs = 50Ohms Icc = 3.4mA, Rp = 100kOhms, 500Ohms, Rs = 50Ohms 5 UNIT SUBGROUPS +18 uA 1, 2 1 -36 +36 uA 3 -6 +6 uA 1, 2 -12 +12 uA 3 1 -2.5 +2.5 uA 1 1 -3.0 +3.0 uA 2 1 -5 +5 uA 3 1 -38 +38 uA 1 1 -40 +40 uA 2 1 -60 +60 uA 3 -14 +14 uA 1 -15 +15 uA 2 -22 +22 uA 3 1 -7 +7 uA 1 1 -11 +11 uA 2 1 -10 +10 uA 3 1 -8.0 +8.0 mV 1 1 -14.0 +14.0 mV 2 1 -12.8 +12.8 mV 3 -7.0 +7.0 mV 1 -13.0 +13.0 mV 2 -11.8 +11.8 mV 3 1 -7.0 +7.0 mV 1 1 -14.5 +14.5 mV 2 1 -13.0 +13.0 mV 3 Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, Rs = 50Ohms MAX -18 Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms MIN 1 Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms PINNAME MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL Tc (+Iin) PARAMETER Average +Input Bias Current Drift CONDITIONS NOTES MAX 1 -100 +100 nA/C 2 1 -225 +225 nA/C 3 1 -50 +50 nA/C 2 1 -75 +75 nA/C 3 1 -30 +30 nA/C 2 1 -32 +32 nA/C 3 1 -125 +125 nA/C 2 1 -275 +275 nA/C 3 1 -60 +60 nA/C 2 1 -100 +100 nA/C 3 1 -35 +35 nA/C 2 1 -38 +38 nA/C 3 Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1 -50 +50 uV/C 2, 3 Icc = 3.4mA, Rp = 100kOhms, 500Ohms 1 -60 +60 uV/C 2, 3 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1 -75 +75 uV/C 2, 3 Rp = 33kOhms, no load 1 11 mA 1, 3 1 12 mA 2 3.8 mA 1, 3 4.2 mA 2 1 1.3 mA 1 1 1.4 mA 2, 3 Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms Average -Input Bias Current Drift Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms Tc (Vio) Icc Average Offset Voltage Drift Supply Current Rl = Rp = 100kOhms, no load Rp = 300kOhms, no load PSRR Power Supply Rejection Ratio Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, -V=-4.5V to -5.0V, +V=+4.5V to +5.0V UNIT SUBGROUPS MIN Icc = 3.4mA, Rp = 100kOhms, 500Ohms Tc (-Iin) PINNAME 1 48 dB 1 1 45 dB 2, 3 Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms, -V=-4.5V to -5.0V, +V=+4.5V to +5.0V 2 48 dB 1 2 45 dB 2, 3 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, -V=-4.5V to -5.0V, +V=+4.5V to +5.0V 1 48 dB 1 1 45 dB 2, 3 6 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL CMRR PARAMETER Common Mode Rejection Ratio CONDITIONS NOTES Icc = 9mA, Vcm = +1V, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Vcm = +1V, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, Vcm = +1V, Rp = 300kOhms, Rl = 1kOhms +Rin Input Resistance Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms Rout Output Impedance at dc Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms MAX UNIT SUBGROUPS 1 48 dB 4 1 45 dB 5, 6 1 48 dB 4 1 45 dB 5, 6 1 48 dB 4 1 45 dB 5, 6 1 800 kOhms 1 1 1600 kOhms 2 1 400 kOhms 3 1 2 MOhms 1 1 4 MOhms 2 1 1 MOhms 3 1 5 MOhms 1 1 10 MOhms 2 1 2.5 MOhms 3 0.3 Ohms 1 1 0.2 Ohms 2 1 1.2 Ohms 3 1 0.5 Ohms 1 1 0.2 Ohms 2 1 1.6 Ohms 3 1 1.0 Ohms 1 1 0.5 Ohms 2 1 3.0 Ohms 3 Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, Ta = +25 C 1 2 pF 4 Icc = 3.4mA, Rp = 100kOhms, 500Ohms, Ta = +25 C 1 2 pF 4 1 2 pF 4 Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms Input Capacitance MIN 1 Icc = 3.4mA, Rp = 100kOhms, 500Ohms Cin PINNAME Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, Ta = +25 C 7 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL Vout PARAMETER Output Voltage Swing CONDITIONS NOTES Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms Iout Output Current Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms CMIR Common Mode Input Voltage Range Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, Rp = 100kOhms, 500Ohms Rl = Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 8 PINNAME MIN MAX UNIT SUBGROUPS 1 2.7 V 4, 5 1 2.5 V 6 2 2.7 V 4, 5 2 2.5 V 6 1 2.5 V 4, 5 1 1.2 V 6 1 36 mA 1 1 36 mA 2 1 18 mA 3 1 18 mA 1 1 18 mA 2 1 9 mA 3 1 5 mA 1 1 5 mA 2 1 2.5 mA 3 1 -1.8 +1.8 V 1 1 -2.0 +2.0 V 2 1 -1.5 +1.5 V 3 1 -1.8 +1.8 V 1 1 -2.0 +2.0 V 2 1 -1.5 +1.5 V 3 1 -1.8 +1.8 V 1 1 -2.0 +2.0 V 2 1 -1.5 +1.5 V 3 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL SSBW PARAMETER Small Signal Bandwidth CONDITIONS NOTES -3dB bandwidth, Vout < 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms LSBW Large Signal Bandwidth -3dB bandwidth, Vout < 5Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms -3dB bandwidth, Vout < 5Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms -3dB bandwidth, Vout < 5Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms GFPL Gain Flatness Peaking Low 0.1Mhz to 25MHz, Vout < 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms GFPH Gain Flatness Peaking High >25MHz, Vout < 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 9 UNIT SUBGROUPS MHz 4 1 100 MHz 5 1 115 MHz 6 80 MHz 4 2 65 MHz 5 2 80 MHz 6 1 35 MHz 4 1 30 MHz 5, 6 1 95 MHz 4, 6 1 80 MHz 5 1 50 MHz 4, 6 1 40 MHz 5 1 20 MHz 4 1 18 MHz 5 1 0.3 dB 4 1 0.4 dB 5, 6 0.2 dB 4 2 0.3 dB 5, 6 1 0.1 dB 4 1 0.2 dB 5, 6 1 0.5 dB 4 1 0.6 dB 5, 6 0.4 dB 4 2 0.5 dB 5, 6 1 0.2 dB 4 1 0.3 dB 5, 6 >20MHz, Vout < 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms >10MHz, Vout < 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms MAX 115 0.1Mhz to 20MHz, Vout < 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 0.1Mhz to 10MHz, Vout < 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms MIN 1 -3dB bandwidth, Vout < 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms -3dB bandwidth, Vout < 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms PINNAME MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL GFR PARAMETER Gain Flatness Rolloff CONDITIONS NOTES 0.1Mhz to 50MHz, Vout < 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms PINNAME MIN LPD Linear Phase Deviation < 50MHz, Vout = 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms < 40MHz, Vout = 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms < 20MHz, Vout = 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms HD2 2nd Harmonic Distortion 2Vpp at 20MHz, Vout = 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms HD3 3rd Harmonic Distortion 2Vpp at 20MHz, Vout = 2Vpp, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms dB 4, 6 1 1.3 dB 5 1.0 dB 4 2 1.3 dB 5 2 1.0 dB 6 1 1.0 dB 4, 6 1 1.3 dB 5 1 1.0 Deg 4, 6 1 1.2 Deg 5 1 1.0 Deg 4, 6 1 1.2 Deg 5 1 0.8 Deg 4, 6 1 1.0 Deg 5 1 -45 dBc 4, 5 1 -40 dBc 6 -45 dBc 4 2 -45 dBc 5 2 -40 dBc 6 1 -45 dBc 4, 5 1 -40 dBc 6 1 -55 dBc 4, 5, 6 -55 dBc 4 2 -55 dBc 5, 6 1 -55 dBc 4, 5, 6 2Vpp at 10MHz, Vout = 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 2Vpp at 5MHz, Vout = 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 10 SUBGROUPS 1.0 2Vpp at 10MHz, Vout = 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 2Vpp at 5MHz, Vout = 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms UNIT 1 0.1Mhz to 40MHz, Vout < 2Vpp, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 0.1Mhz to 20MHz, Vout < 2Vpp, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms MAX MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL NF PARAMETER Noise Floor CONDITIONS NOTES > 1 MHz, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1, 4 PINNAME MIN UNIT -154 dBm 4, 6 -153 1Hz dBm 5 -153 1Hz dBm 4, 6 -152 1Hz dBm 5 -150 1Hz dBm 4, 6 -149 1Hz dBm 5 1, 4 65 1Hz uV 4, 6 1, 4 70 uV 5 1, 4 70 uV 4, 6 1, 4 80 uV 5 1, 4 70 uV 4, 6 1, 4 80 uV 5 1, 4 > 1 MHz, Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms 1, 4 1, 4 > 1 MHz, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms 1, 4 1, 4 INV Noise Floor 1MHz to 200MHz, Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms 1MHz to 200MHz, Icc = 3.4mA, Rp = 100kOhms, Rl =500Ohms 1MHz to 200MHz, Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms SR Ts Slew Rate Settling Time Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, Av = +2, Vout = 3V, measured at +1V SUBGROUPS MAX 1 1200 V/us 9, 10 1 1000 V/us 11 Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms, Av = +2, Vout = 3V, measured at +1V 1 800 V/us 9, 10 1 700 V/us 11 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, Av = +2, Vout = 3V, measured at +1V 1 600 V/us 9, 10 1 500 V/us 11 Icc = 9mA, Rp = 33kOhms, Rl = 250Ohms, 2V step at +0.1% of the fixed value 1 16 ns 9, 10, 11 Icc = 3.4mA, Rp = 100kOhms, Rl = 500Ohms, 2V step at +0.05% of the fixed value 1 22 ns 9, 10, 11 Icc = 1mA, Rp = 300kOhms, Rl = 1kOhms, 2V step at +0.05% of the fixed value 1 60 ns 9, 10 1 70 ns 11 11 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vs = +5V dc, Rl is load resistance, Rp is programming resistance, feedback resistance (Rf) = 1000 Ohms, peak capacitance (Cp) = 100 pF, and Av = +6. -55 C < Ta < +125 C (Note 3) SYMBOL Tf PARAMETER Rise and Fall Time CONDITIONS NOTES Icc = 9mA, 2V step, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, 2V step, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, 2V step, Rp = 300kOhms, Rl = 1kOhms Tr Rise and Fall Time Icc = 9mA, 5V step, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, 5V step, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, 5V step, Rp = 300kOhms, Rl = 1kOhms OS Overshoot Icc = 9mA, 2V step, Rp = 33kOhms, Rl = 250Ohms Icc = 3.4mA, 2V step, Rp = 100kOhms, Rl = 500Ohms Icc = 1mA, 2V step, Rp = 300kOhms, Rl = 1kOhms Note 1: Note 2: Note 3: Note 4: PINNAME MIN MAX UNIT 1 3.0 ns 9, 11 1 3.5 ns 10 1 4.4 ns 9, 11 1 5.4 ns 10 1 10 ns 9 1 12 ns 10, 11 1 3.7 ns 9, 11 1 4.4 ns 10 1 7.0 ns 9, 11 1 8.8 ns 10 1 18 ns 9 1 20 ns 10, 11 1 12 % 9 1 15 % 10, 11 1 10 % 9 1 12 % 10, 11 1 5 % 9 1 8 % 10, 11 If not tested, shall be guaranteed to the limits specified in table I herein. Group A testing only. The algebraic convention, whereby the most negative value is a minimum and the most positive is a maximum, is used in this table. Negative current shall be defined as conventional current flow out of a device terminal. Noise tests are performed from 1MHz to 200MHz for Icc = 9mA, 1MHz to 200MHz for Icc = 3.4mA, and 1MHz to 100MHz for Icc = 1mA. 12 SUBGROUPS MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Graphics and Diagrams GRAPHICS# DESCRIPTION 07076HRA2 CERDIP (J), 8 LEAD (B/I CKT) J08ARL CERDIP (J), 8 LEAD (P/P DWG) P000408A CERDIP (J), 8 LEAD (PINOUT) See attached graphics following this page. 13 N/C 1 8 Rp VINV 2 7 +VCC 3 6 VOUT 4 5 N/C VNON-INV -VCC CLC505J 8 - LEAD DIP CONNECTION DIAGRAM TOP VIEW P000408A N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 MICROCIRCUIT DATA SHEET MNCLC505A-X REV 0A0 Revision History Rev ECN # 0A0 M0003517 08/18/99 Rel Date Originator Changes Shaw Mead Initial MDS Release 14