DSR1A-1M Surface Mount Standard Rectifiers Major Ratings and Characteristics 1.0 A IF(AV) 50 V to 1000 V VRRM 25 A IFSM 5 μA IR 1.1 V VF 150 °C Tj max. Features ● ● ● ● ● ● ● ● Low profile space Ideal for automated placement Glass passivated chip junctions Low forward voltage drop Low leakage current High forward surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date ● ● ● Case: JEDEC SOD-123FL molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Laser band denotes cathode end Maximum Ratings & Thermal Characteristics & Electrical Characteristics (TA = 25 °C unless otherwise noted) Symbol DSR1A DSR1B DSR1D DSR1G DSR1J DSR1K DSR1M UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IF(AV) 1 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 25 A VF 1.1 V IR 5.0 50 μA CJ 15 pF TJ, TSTG –55 to +150 ℃ Maximum instantaneous forwad voltage at 1.0A Maximum DC reverse current TA = 25 ℃ at Rated DC blocking voltage TA = 125℃ Typical junction capacitance at 4.0 V ,1MHz Operating junction and storage temperature range WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[email protected] DSR1A-1M Surface Mount Standard Rectifiers Characteristic Curves (TA=25 ℃ unless otherwise noted) WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[email protected]