FKC03 SERIES 3 WATTS DC-DC CONVERTER FEATURES • 3 WATTS REGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 500mA • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 82% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • FIXED SWITCHING FREQUENCY (300kHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • OVER CURRENT PROTECTION • CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC • SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU OPTIONS APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment SMD TYPE, M1 TYPE DESCRIPTION The FKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible with FKC05 series. FKC03 series have 2:1 wide input voltage of 9~18VDC, 18~36VDC and 36~75VDC. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 3 Watts, max. Voltage accuracy ± 1% Minimum load Line regulation LL to HL at Full Load ± 0.2% Single Dual No Load to Full Load Cross regulation(Dual) Asymmetrical load 25% / 100% FL Ripple and noise 20MHz bandwidth ± 0.2% ± 1% ±0.02% / ºC, max. % of FL at nominal input Short circuit protection 500VDC Isolation capacitance Page 1 of 3 DIP SMD 9 10 ohms, min. 350ms, max. ENVIRONMENTAL SPECIFICATIONS -25ºC~+85ºC (with derating) -40ºC~+85ºC (non-derating) +100ºC -55ºC ~ +125ºC Natural convection 20ºC/watt MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC CHARACTERISTICS EMI 300kHz, ±10% ESD Design meet safety standard MTBF (Note 1) Power up See table Vibration 1600VDC, min. 1minute 1600VDC, min. 1minute Relative humidity 1000VDC, min. 1minute 300pF, max. Switching frequency Weight Start up time 20mAp-p Nominal input and constant resistive load Thermal shock Input to Output Isolation voltage Input(Output) to Case Dimensions Input reflected ripple current Thermal impedance Efficiency Potting material 36VDC 100ms, max. 50VDC 100ms, max. 100VDC 100ms, max. Continuous, automatics recovery Storage temperature range GENERAL SPECIFICATIONS Base material 12VDC input 24VDC input 48VDC input 200µs Operating ambient temperature Standard M1 (Note 6) 180% Maximum case temperature Transient response recovery time 25% load step change Case material 9 ~ 18VDC 18 ~ 36VDC 36 ~ 75VDC Pi type Input surge voltage ± 5% See table Temperature coefficient Isolation resistance 12VDC nominal input 24VDC nominal input 48VDC nominal input 0% Input filter Load regulation Over load protection Input voltage range IEC60950-1, UL60950-1, EN60950-1 Radiated immunity EN55022 EN61000-4-2 Air Contact Class A, Class B ± 8kV Perf. Criteria A ± 6kV EN61000-4-3 10 V/m Perf. Criteria A Nickel-coated copper Fast transient (Note 7) EN61000-4-4 EN61000-4-5 Non-conductive black plastic Surge (Note 7) ± 2kV Perf. Criteria B ± 1kV Perf. Criteria B 10 Vr.m.s Perf. Criteria A Epoxy (UL94-V0) Conducted immunity EN61000-4-6 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) BELLCORE TR-NWT-000332 3.155 x 106 hrs MIL-HDBK-217F 2.597 x 106 hrs www.pduke.com 2013/5/3 FKC03 SERIES 3 WATTS Model Number Input Range Output Voltage FKC03-12S33 FKC03-12S05 FKC03-12S12 FKC03-12S15 FKC03-12D05 FKC03-12D12 FKC03-12D15 FKC03-24S33 FKC03-24S05 FKC03-24S12 FKC03-24S15 FKC03-24D05 FKC03-24D12 FKC03-24D15 FKC03-48S33 FKC03-48S05 FKC03-48S12 FKC03-48S15 FKC03-48D05 FKC03-48D12 FKC03-48D15 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 9 ~ 18 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 18 ~ 36 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 36 ~ 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output Current Min. load Full load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA DC-DC CONVERTER (2) (3) (4) (5) Output Ripple & Noise No load Input Current Eff (%) Capacitor Load max 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 10mA 10mA 10mA 15mA 15mA 15mA 20mA 10mA 10mA 15mA 15mA 15mA 20mA 20mA 5mA 10mA 10mA 10mA 10mA 10mA 10mA 75 76 80 81 78 80 82 72 74 78 78 74 77 77 74 74 79 78 73 79 77 2200µF 1000µF 220µF 150µF ± 470µF ± 100µF ± 68µF 2200µF 1000µF 220µF 150µF ± 470µF ± 100µF ± 68µF 2200µF 1000µF 220µF 150µF ± 470µF ± 100µF ± 68µF 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA 50mVp-p Note BELLCORE TR-NWT-000332. Case 1：50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Typical value at nominal input and full load. (20MHz BW.) 3. Typical value at nominal input and no load. 4. Typical value at nominal input and full load. 5. Test by minimum input and constant resistive load. 6. M1 version is more efficiency, therefore, it can be operated in a more extensive temperature range than standard. 7. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF /100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. 1. M1 Version O U T P U T P O W E R (% ) FKC03-48S05 Derating Curve M1 Version 120 100 80 60 40 20 0 -40 -25 -10 82.4 5 20 35 50 65 80 95 110 E F F IC IE N C Y (% ) AMBIENT TEMPERATURE(℃) 80 75 70 65 60 55 50 45 40 35 30 FKC03-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) Page 2 of 3 www.pduke.com 2013/5/3 FKC03 SERIES 3 WATTS MECHANICAL DRAWING DC-DC CONVERTER ： DIP TYPE SMD TYPE 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION SMD PIN CONNECTION PIN 2 3 SINGLE -INPUT -INPUT DUAL -INPUT -INPUT PIN 23 22 SINGLE +INPUT +INPUT DUAL +INPUT +INPUT PIN 2 3 SINGLE -INPUT -INPUT DUAL -INPUT -INPUT PIN 23 22 SINGLE +INPUT +INPUT DUAL +INPUT +INPUT 9 10 11 NC NC NC COMMON NC -OUTPUT 16 15 14 -OUTPUT NC +OUTPUT COMMON NC +OUTPUT 9 10 11 Others NC NC NC NC COMMON NC -OUTPUT NC 16 15 14 -OUTPUT NC +OUTPUT COMMON NC +OUTPUT Page 3 of 3 www.pduke.com 2013/5/3