Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a / Dec, 2011 IGS-3032GC Features Industrial 5-port managed Gigabit Ethernet switch with 3x10/100/1000Base-T(X) and 2xGigabit combo ports, SFP socket Industrial Media Converter ▪ Designed for Railway application and full compliant with the requirement of EN50155 standard ▪ Fastest Redundant Ethernet Ring : O-Ring (recovery time < 20ms over 250 units of connection) ▪ Open-Ring supports the other vendor's ring technology in open architecture ▪ O-Chain allow multiple redundant network rings Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function Support Modbus TCP protocol Supports jumbo frame up to 9KBytes STP/RSTP:2004/MSTP supported Industrial Device Server ▪ ▪ ▪ ▪ Industrial Ethernet Switch IGS-3032GC ▪ Supports PTP Client (Precision Time Protocol) clock synchronization ▪ Support IPV6 new internet protocol version Industrial Wireless Access Point ▪ Provided HTTPS/SSH protocol to enhance network security ▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic ▪ Port Trunking for easy of bandwidth management ▪ SNMP v1/v2c/v3 support for secured network management ▪ RMON for traffic monitoring ▪ Event notification through Syslog, Email, SNMP trap, and Relay Output Industrial Cellular VPN Router ▪ Windows utility (Open-Vision) supports centralized management, plus Web-based ,Telnet, and Console (CLI) configurations ▪ Supports five Gigabit ports ▪ Support TACACS+ and 802.1x User Authentication for security ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled Industrial M2M Gateway ▪ Supports LLDP Protocol Introduction ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. *NOTE: This function is available by request only D esign ed for R u gged E xcellence Network Management Software Open-Vision Accessories IGS-3032GC is a full gigabit managed Redundant Ring Ethernet switch with 3x10/100/1000Base-T(X) and 2xGigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection), Open-Ring, and MSTP/RSTP:2004/STP (IEEE 802.1s/ w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGS-3032GC can be managed centralized and convenient by a powerful windows utility — Open-Vision. The redundant DC power inputs guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails. IGC-3032GC provides relay outputs that can be set up to indicate events with urgency to notify or warn the technicians, so they can quickly respond to the message in priority. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application. 1-171 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a / Dec, 2011 Industrial Ethernet Switch 1 Network connection Topology View Monitoring and Configuration interface Dimensions (Unit=mm) 1-172 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a / Dec, 2011 ORing Switch Model Industrial Ethernet Switch Specifications IGS-3032GC Physical Ports 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX Gigabit Combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port 3 Industrial Media Converter 2 Technology Up to 9 kbytes Switching latency : 7 μs Switching bandwidth : 10 Gbps Max. Number of Available VLANs : 4096 IGMP multicast groups : 1024 Port rate limiting : User Define Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMP v1/v2c/v3 encrypted authentication and access security Https / SSH enhance network security STP/RSTP:2004/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping for multicast filtering Port configuration, status, statistics, monitoring, security SNTP for synchronizing of clocks over network Supports PTP Client (Precision Time Protocol) clock synchronization DHCP Server / Client support Port Trunk support MVR (Multicast VLAN Registration) support Modbus TCP O-Ring O-Chain Open-Ring STP MRP*NOTE RSTP:2004 MSTP RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 Switch Properties Security Features Software Features Network Redundancy RS-232 Serial Console Port Accessories Store-and-Forward Jumbo Frame Industrial M2M Gateway Processing Industrial Cellular VPN Router 4 Industrial Wireless Access Point Priority Queues Ethernet Standards Industrial Device Server MAC Table IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1D-2004 for RSTP:2004 (Rapid Spanning Tree Protocol 2004) IEEE 802.1w for RSTP(Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) 8192 MAC addresses Power indicator Green : Power LED x 3 R.M. indicator Green : Indicates that the system is operating in O-Ring Master mode Ring indicator Green : Indicates that the system is operating in O-Ring mode Fault indicator Amber : Indicates unexpected event occurred Network Management Software LED Indicators *NOTE: This function is available by request only D esign ed for R u gged E xcellence 1-173 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a / Dec, 2011 10/100/1000Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for 100Mbps indicator 100/1000Base-X SFP Port Indicator Green for port Link/Act. Fault contact Relay Relay output to carry capacity of 1A at 24VDC Power Industrial Ethernet Switch 1 Redundant Input Power Triple DC inputs: +12 ~ +48VDC or -12 ~ -48VDC on 7-pin terminal block, 12 ~ 45VDC on power jack Power Consumption (Typ.) 10 Watts Overload Current Protection Present Reverse Polarity Protection Present on terminal block Physical Characteristics Enclosure IP-30 Dimensions (W x D x H) 54.1(W)x106.1(D)x145.4(H) mm (2.13x4.18x5.72inch.) Weight (g) 820g Environmental Storage Temperature -40 to 85°C (-40 to 185°F) Operating Temperature -40 to 70°C (-40 to 158°F) Operating Humidity 5% to 95% Non-condensing Regulatory Approvals EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27, EN61373 Free Fall IEC60068-2-32 Vibration IEC60068-2-6, EN61373 Safety EN60950-1 Warranty 5 years Ordering Information I G S -3 A A B CC Code Definition 10/100/1000Base-T(X) Port Number Option Available Model - 03 : 3 ports Model Name IGS-3032GC Packing List ‧IGS-3032GC ‧DIN-Rail Kit ‧Wall-mount Kit ‧Console Cable ‧ORing Tool CD ‧Quick Installation Guide 1-174 w w w.oring - net wo rk in g.co m Additional Port Number - 2 : 2 ports Additional Port Type -GC : Gigabit Combo port Description Industrial 5-port managed Gigabit Ethernet switch with 3x10/100/1000Base-T(X) and 2xGigabit combo ports, SFP socket Optional Accessories (Can be purchased separately) ‧Open-Vision M500 : Powerful Network Management Windows Utility Suite, 500 IP devices ‧SFP100 series : 100Mbps SFP optical transceiver ‧SFP 1G series : 1Gbps SFP optical transceiver ‧DR-45 series : 45 Watts DIN-Rail power supply ‧DR-75 series : 75 Watts DIN-Rail power supply ‧DR-120 series : 120 Watts DIN-Rail power supply ‧SDR-240-48, 240W DIN-Rail power supply ‧SDR-480-48, 480W DIN-Rail power supply