2B-XES&2F-XES&2H-XES Series Isolated 2W Single Output DC/DC Converters SELECTION GUIDE FEATURES ◆ RoHS ◆ 12 Pin SIP Package ◆ compliant Low ripple and noise Input Voltage (V) Output Voltage (V) Output Current max(MA) Capacitive load,max (μF) Efficiency Order code 2B0503XES 4.5-5.5 3.3 600 470 64 2B0505XES 4.5-5.5 5 400 470 66 2B0507XES 4.5-5.5 7.2 278 470 64 2B0509XES 4.5-5.5 9 222 470 66 2B0512XES 4.5-5.5 12 167 470 70 2B0515XES 4.5-5.5 15 134 470 70 2B0518XES 4.5-5.5 18 111 470 67 2B0524XES 4.5-5.5 24 83 470 68 10.8-13.2 3.3 600 470 64 (%) ◆ High efficiency up to 70% 2B1203XES 2B1205XES 10.8-13.2 5 400 470 66 ◆ Operating temperature -40℃ to+85℃ 2B1207XES 10.8-13.2 7.2 278 470 63 2B1209XES 10.8-13.2 9 222 470 66 2B1212XES 10.8-13.2 12 167 470 70 2B1215XES 10.8-13.2 15 134 470 70 2B1218XES 10.8-13.2 18 111 470 66 2B1224XES 10.8-13.2 24 83 470 68 2B2403XES 21.6-26.4 3.3 600 470 54 2B2405XES 21.6-26.4 5 400 470 64 2B2407XES 21.6-26.4 7.2 278 470 63 2B2409XES 21.6-26.4 9 222 470 64 2B2412XES 21.6-26.4 12 167 470 68 2B2415XES 21.6-26.4 15 134 470 68 2B2418XES 21.6-26.4 18 111 470 68 2B2424XES 21.6-26.4 24 83 470 70 ◆ ◆ Input/Output Isolation 1000 , 3000 or 6000VDC Pin compatible with multiple manufacturers MODEL SELECTION ① ② ③ ④ ⑤ 2B 24 05 X ES ①Product Series ③Output Voltage ⑤EXTEND SIP ②Input Voltage ④Fixed Input APPLICATIONS 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Microdc; refer to www.microdc.cn for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,nominal input voltage and at rated output load unless otherwise specified. 5. Microdc may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Microdc’s sandard Terms of Sale available at www.microdc.cn. Input/Output Isolation 3000VDC 2F0503XES 4.5-5.5 3.3 600 470 64 2F0505XES 4.5-5.5 5 400 470 66 2F0507XES 4.5-5.5 7.2 278 470 64 2F0509XES 4.5-5.5 9 222 470 66 2F0512XES 4.5-5.5 12 167 470 70 2F0515XES 4.5-5.5 15 134 470 70 2F0518XES 4.5-5.5 18 111 470 67 2F0524XES 4.5-5.5 24 83 470 68 2F1203XES 10.8-13.2 3.3 600 470 64 2F1205XES 10.8-13.2 5 400 470 66 2F1207XES 10.8-13.2 7.2 278 470 63 2F1209XES 10.8-13.2 9 222 470 66 2F1212XES 10.8-13.2 12 167 470 70 2F1215XES 10.8-13.2 15 134 470 70 2F1218XES 10.8-13.2 18 111 470 66 2F1224XES 10.8-13.2 24 83 470 68 2F2403XES 21.6-26.4 3.3 600 470 64 2F2405XES 21.6-26.4 5 400 470 64 2F2407XES 21.6-26.4 7.2 278 470 63 2F2409XES 21.6-26.4 9 222 470 64 2F2412XES 21.6-26.4 12 167 470 68 2F2415XES 21.6-26.4 15 134 470 68 2F2418XES 21.6-26.4 18 111 470 68 2F2424XES 21.6-26.4 24 83 470 70 Input/Output Isolation 6000VDC MICRODC R ESERVES THE COPYRIGHT http://www.microdc.cn 2H0503XES 4.5-5.5 3.3 600 470 53 2H0505XES 4.5-5.5 5 400 470 66 2H0507XES 4.5-5.5 7.2 278 470 64 2H0509XES 4.5-5.5 9 222 470 66 Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 3 2B-XES&2F-XES&2H-XES Series SELECTION GUIDE Order code Input Voltage (V) Output Voltage (V) Output Current max(MA) Capacitive load,max (μF) Efficiency (%) H0512XES 4.5-5.5 12 167 470 70 H0515XES 4.5-5.5 15 134 470 70 H0518XES 4.5-5.5 18 111 470 67 H0524XES 4.5-5.5 24 83 470 68 H1203XES 10.8-13.2 3.3 600 470 53 H1205XES 10.8-13.2 5 400 470 66 H1207XES 10.8-13.2 7.2 278 470 63 H1209XES 10.8-13.2 9 222 470 66 H1212XES 10.8-13.2 12 167 470 70 H1215XES 10.8-13.2 15 134 470 70 H1218XES 10.8-13.2 18 111 470 66 H1224XES 10.8-13.2 24 83 470 68 H2403XES 21.6-26.4 3.3 600 470 54 H2405XES 21.6-26.4 5 400 470 64 H2407XES 21.6-26.4 7.2 278 470 63 H2409XES 21.6-26.4 9 222 470 64 H2412XES 21.6-26.4 12 167 470 68 H2415XES 21.6-26.4 15 134 470 68 H2418XES 21.6-26.4 18 111 470 68 H2424XES 21.6-26.4 24 83 470 70 Input Specifications Parameters Voltage range Nominal Typical 5 4.5-5.5 12 10.8-13.2 24 21.6-25.4 Filter Maximum Units VDC Capacitor Turn on Transient process time 100 Start up time 300 Absolute Maximum Rating 5 Vin 0-7 12 Vin 0-15 24 Vin 0-28 Peak Input Voltage time ms ms VDC 100 ms Isolation Specifications Parameters Conditions Tested I/O voltage 3 sec Typical Rated 1000, 3000 or 6000 Units VDC Resistance > 1000 MOhm Capacitance 60 pF Output Specifications Parameters Conditions Voltage accuracy Typical ±2 Short Circuit protection Short Circuit restart Load voltage regulation (Single) Units % Continuous Auto-recovery Line voltage regulation (Single) Load voltage regulation (Single) Maximum ±0.5 % Load 0 – 100% ±0.5 % Load 0 – 100% ±1.5 % ±0.02 %/℃ 75 mV p-p 150 ms 3.3V output model Temperature coefficient Ripple & Noise Rising time http://www.microdc.cn At 20MHz Bandwidth Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 3 2B-XES&2F-XES&2H-XES Series General Specifications Parameters Conditions Typical Switching frequency 100% load 50 Operating temperature Full Load without Derating Maximum Units KHz Storage temperature -40 to +85 ℃ -40 to +125 ℃ Max Case temperature 90 Cooling ℃ Free air convection % Humidity 90 Case material % Plastic UL94-VO Weight 3.8 g Dimensions (L x W x H) 1.25 x 0.34 x 0.53 inches MTBF >1 500 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) 31.80 x 8.60 x 13.47 mm NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltageand at rated output load unless otherwise specified Pin Out Specifications Pin 1000VDC 3000 and 6000VDC 1 +V Input +V Input 2 N.C. -V Input 3 N.C. N.C. 9 N.C. N.C. 10 -V Output -V Output 11 +V Output +V Output 12 -V Input N.C. RoHS COMPLIANT INFORMATION Microdc Professional Power Module,Inc. Tel:0086-20-86000646 E-mail:[email protected] Website:http://www.microdc.cn This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. REACH COMPLIANT INFORMATION This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 3