3M™ Pak 100 4-Wall Header .100″ × .100″ Latch/Ejector, Straight and Right Angle 3000 Series • Military (with 3M's 3518 polarizing key) and centerbump polarization • Standard ejector latches • Mounting holes for securing header to board • RoHS* compliant • Optional polarizing posts • High temperature insulator suitable for “no lead” soldering operations • Suitable for reflow soldering using “paste in hole” techniques Date Modified: January 7, 2005 TS-0772-04 Sheet 1 of 4 Physical Insulator Material: Glass Filled Polyester (PCT) Flammability: UL 94V-0 Color: Black Contact Material: Copper Alloy Plating 100 µ″ [ 2.54 µm ] Nickel - Overall 30 µ″ [ 0.76 µm ] Gold 200 µ″ [ 5.08 µm ] Matte Tin e3 (per JESD97) Marking: 3M Logo, Part Identification Number and Orientation Triangle Underplating: Wiping Area: Solder Tails: Terminal Finish Indicator: Electrical Current Rating: 1 A Insulation Resistance: >1 × 109 Ω at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental -55°C to +105°C Process Rating: Maximum 260°C, single pass, (profile per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) Temperature Rating: UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ *RoHS = Directive 2002/95/EC, Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment. 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 100 4-Wall Header .100″ × .100″ Latch/Ejector, Straight and Right Angle -X202 Header with Short Ejector/Latch for 3M Sockets without Strain Relief .08 [2.0] 3000 Series -X302 Header with Long Ejector/Latch for 3M Sockets with Strain Relief .08 [2.0] .573 ± .010 [ 14.55 ] .424 ± .010 [ 10.77 ] 1.07 Ref [27.2] .97 Ref [24.6] .37 Ref [9.4] .46 Ref [11.7] 2X ø.100 [2.54] (See Note 2) .025 ± .002 Sq Typ [ 0.64 ] .24 [6.1] .28 [7.1] D .020 [0.51] .25 [6.4] .30 [7.6] .100 Ref [2.54] .12 [3.0] .112 ± .010 [2.84] CL .34 [8.3] .100 Ref [2.54] Position 1 B “Y” .0245 Typ Position 1 Orientation Triangle Section A-A (Straight) .025 ± .002 Sq Typ [ 0.64 ] .24 [6.1] .0245 Typ CL .30 [7.6] “Y” .112 ± .010 [2.84] .049 Ref [1.24] .100 Ref [2.54] .21 [5.3] Notch A (See Table 1 & Note1) Notch B (See Table 1) Notch C (See Table 1 & Note 1) .16 [4.1] A B .68 [17.3] .35 [8.9] .020 [0.51] A 2X ø .100 [2.54] (See Note 2) C B .197 [5.00] .20 [5.1] A Section B-B (Right Angle) TS-0772-04 Sheet 2 of 4 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 100 4-Wall Header .100″ × .100″ Latch/Ejector, Straight and Right Angle 3000 Series Table 1 Pin Quantity 3M Part Number 10 Dimensions Polarization Notches Provided A B C D 3793 1.26 [32.1] 1.105 [28.07] .865 [21.97] .71 [18.0] BC 14 3314 1.46 [37.2] 1.305 [33.15] 1.065 [27.05] .91 [23.1] BC 16 3408 1.56 [39.7] 1.405 [35.69] 1.165 [29.59] 1.01 [25.6] ABC 20 3428 1.76 [44.8] 1.605 [40.77] 1.365 [34.67] 1.21 [30.7] ABC 24 3627 1.96 [49.8] 1.805 [45.85] 1.565 [39.75] 1.41 [35.8] ABC 26 3429 2.06 [52.4] 1.905 [48.39] 1.665 [42.29] 1.51 [38.3] ABC 30 3440 2.26 [57.4] 2.105 [53.47] 1.865 [47.37] 1.71 43.43] ABC 34 3431 2.46 [62.6] 2.305 [58.55] 2.065 [52.45] 1.91 [48.5] ABC 40 3432 2.76 [70.2] 2.605 [66.17] 2.365 [60.07] 2.21 [56.1] ABC 50 3433 3.26 [82.9] 3.105 [78.87] 2.865 [72.77] 2.71 [68.8] ABC 60 3372 3.76 [95.6] 3.605 [91.57] 3.365 [85.47] 3.21 [81.5] ABC 3764 3.96 [100.7] 3.805 [96.65] 3.565 [90.55] 3.41 [86.6] ABC 64 ø.106 [2.69] .060 [1.52] ± .1 .00 .000 ± .01 ± .005 [ ] Dimensions for Reference only .41 (See Note 2) [10.4] Max to Edge of PCB .035 for Daisy Chain [0.89] Dia .035 [0.89] Dia "Y" CL Position 1 .029 [0.74] Position 1 .100 ± .003 [2.54] .100 ± .003 [2.54] .100 ± .003 [2.54] .352 [8.94] .100 ± .003 [2.54] .0 Inch ø.106 or ø.116 [2.95] [2.69] CL “Y” [mm] Tolerance Unless Noted or ø.116 [2.95] (See Note 2) .300 [7.62] Side to Side Stackability Inch .232 [5.89] B C Recommended Mounting Hole Pattern Recommended Mounting Hole Pattern (Right Angle) (Straight) Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518). 2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used. 3. .112 [2.84] tail length suitable for .062 [1.57] thick pc board. 4. Contact tails .0245 [0.622] crowned wire with .0075 [0.191] corner radii & .028 [.072] diagonal. 5. Contact your 3M sales representative for custom requirements. Ordering Information NXXXX-XX02RB 3M Part Number (See Table 1) Pin Configuration 5 = Right Angle 6 = Straight 3M Interconnect Solutions http://www.3M.com/interconnects/ Latch/Ejector System 2 = Short Roll Pin Latch/Ejectors (3M Part # N3505-2) 3 = Long Roll Pin Latch/Ejectors (3M Part # N3505-3) TS-0772-04 Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pak 100 4-Wall Header .100″ × .100″ Latch/Ejector, Straight and Right Angle, Accessories Polarizing Post Mounting Hardware 3341-5 (Installed from bottom of board) 3341-6 (Right angle product only) .321 [8.15] Part N um ber 3 2 0 1 -4 M a te ria l LCP C o lo r B la c k .100 Dia [2.54] .50 [12.7] .31 [7.9] 3000 Series Note: Insert Post into one mounting hardware hole on bottom of header. Set post to protrude .115″. Panhead Thread Cutting Screw: #4-24 X 5/16″ Type: USA Std BT, Federal BG Hex Head Bolt, Nut and Washer Bolt - #2-56 X 1/2″ 3341-5 & 6 Material - Stainless Steel Polarizing Keys Part N um ber M aterial N 3518 N ylon Breakaway Tab C olor B lack D im A 0.02 .09 [2.3] .34 Ref [8.6] A .15 [3.8] Note: #2216 B/A Scotchweld can be used to adhere keys. TS-0772-04 Sheet 4 of 4 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/esd Minimum 10% Post-consumer Fiber Printed in USA. © 3M 2005