BYS10-25 thru BYS10-45 www.vishay.com Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • Low profile package • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Very low switching losses • High surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified DO-214AC (SMA) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications. PRIMARY CHARACTERISTICS IF(AV) 1.5 A VRRM 25 V to 45 V IFSM 40 A VF 0.50 V TJ max. 150 °C MECHANICAL DATA Case: DO-214AC (SMA) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) SYMBOL PARAMETER Device marking code Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current IF(AV) Peak forward surge current single half sine-wave superimposed on rated load Junction and storage temperature range Revision: 26-Mar-12 BYS10-35 BYS10-45 BYS 025 BYS 035 BYS 045 25 35 45 1.5 UNIT V A 40 8.3 ms 10 ms BYS10-25 IFSM TJ, TSTG A 30 - 65 to + 150 °C Document Number: 86013 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYS10-25 thru BYS10-45 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) TEST CONDITIONS PARAMETER Maximum instantaneous forward voltage (1) SYMBOL BYS10-35 VF 1.0 A Maximum DC reverse current (1) BYS10-25 TJ = 25 °C VRRM UNIT 500 IR TJ = 100 °C BYS10-45 mV 500 μA 10 mA Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) SYMBOL PARAMETER Maximum thermal resistance, junction to lead Maximum thermal resistance, junction to ambient BYS10-25 BYS10-35 RJL 25 RJA (1) 150 RJA (2) 125 RJA (3) 100 BYS10-45 UNIT °C/W °C/W Notes Mounted on epoxy-glass hard tissue (2) Mounted on epoxy-glass hard tissue, 50 mm2 35 μm Cu (3) Mounted on Al-oxide-ceramic (Al O ), 50 mm2 35 μm Cu 2 3 (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE BYS10-45-E3/TR 0.064 TR 1800 7" diameter plastic tape and reel BYS10-45-E3/TR3 0.064 TR3 7500 13" diameter plastic tape and reel BYS10-45HE3/TR (1) 0.064 TR 1800 7" diameter plastic tape and reel 0.064 TR3 7500 13" diameter plastic tape and reel BYS10-45HE3/TR3 (1) Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES 7 1000 BYS10-45 6 Reverse Current (mA) PR - Max. Reverse Power Dissipation (W) (TA = 25 C unless otherwise noted) 5 BYS10-35 4 RthJA = 25 K/W 3 BYS10-25 2 100 10 VR = VRRM 1 1 RthJA = 100 K/W 0.1 0 0 40 80 120 160 200 0 40 80 120 160 200 Junction Temperature (°C) Junction Temperature (°C) Fig. 1 - Max. Reverse Power Dissipation vs. Junction Temperature Fig. 2 - Max. Reverse Current vs. Junction Temperature Revision: 26-Mar-12 Document Number: 86013 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYS10-25 thru BYS10-45 www.vishay.com Vishay General Semiconductor 2.0 100 TJ = 150 °C Forward Current (A) Average Forward Current (A) VR = VRRM, Half Sine-Wave, RthJA = 25 K/W 1.6 1.2 BYS10-25 0.8 BYS10-35 10 1 TJ = 25 °C 0.1 0.4 BYS10-45 0.01 0 0 40 80 120 160 0 200 0.4 0.8 1.2 1.6 2.0 Ambient Temperature (°C) Forward Voltage (V) Fig. 3 - Max. Average Forward Current vs. Ambient Temperature Fig. 5 - Max. Forward Current vs. Forward Voltage 100 Transient Thermal Impedance (°C/W) Average Forward Current (A) 2.0 VR = 0 V, Half Sine-Wave 1.6 1.2 100 K/W RthJA = 25 K/W 125 K/W 0.8 150 K/W 0.4 0 0 40 80 120 1 0.1 0.01 200 160 10 0.1 Ambient Temperature (°C) 1 10 100 t - Heating Time (s) Fig. 4 - Max. Average Forward Current vs. Ambient Temperature Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.074 (1.88) MAX. 0.066 (1.68) MIN. 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Revision: 26-Mar-12 Document Number: 86013 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000