Kingbright APT1608F3C 0706 1.6x0.8mm infrared emitting diode Datasheet

1.6x0.8mm INFRARED EMITTING DIODE
Part Number: APT1608F3C
Features
Description
z 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS.
F3 Made with Gallium Arsenide Infrared Emitting diodes.
z MECHANICALLY AND SPECTRALLY MATCHED TO
PHOTOTRANSISTOR.
z WATER CLEAR LENS.
z PACKAGE: 2000PCS / REEL .
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH3781
REV NO: V.2
DATE: JUN/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1203001654
Selection Guide
Part No.
APT1608F3C
Dice
Lens Type
F3 (GaAs)
Po (mW/sr) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
2θ1/2
0.4
1.2
120°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Radiant Intensity/ luminous flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Parameter
P/N
Symbol
Typ.
Max.
Units
Test Conditions
Forward Voltage [1]
F3
VF
1.2
1.6
V
IF=20mA
Reverse Current
F3
IR
10
uA
VR = 5V
Capacitance
F3
C
90
pF
VF=0V;f=1MHz
Peak Spectral Wavelength
F3
λP
940
nm
IF=20mA
Spectral Bandwidth
F3
Δλ1/2
50
nm
IF=20mA
Note:
1. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
F3
Units
Power dissipation
PT
80
mW
DC Forward Current
IF
50
mA
Peak Forward Current [1]
iFS
1.2
A
Reverse Voltage
VR
5
V
Operating Temperature
TA
-40 To +85
°C
TSTG
-40 To +85
°C
Storage Temperature
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH3781
REV NO: V.2
DATE: JUN/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1203001654
APT1608F3C
SPEC NO: DSAH3781
REV NO: V.2
DATE: JUN/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1203001654
APT1608F3C
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH3781
REV NO: V.2
DATE: JUN/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1203001654
PACKING & LABEL SPECIFICATIONS
APT1608F3C
SPEC NO: DSAH3781
REV NO: V.2
DATE: JUN/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1203001654
Similar pages