AZ696 10 AMP SUBMINIATURE POWER RELAY FEATURES • Miniature size: Form A version: 0.63" (16 mm) height, 1.10" (30 mm) length, 0.39" (10 mm) width • High sensitivity, 100 mW pickup • Dielectric strength 4000 Vrms • Isolation spacing greater than 8 mm • Approvals/Standards include: UL, VDE, IEC • 10 Amp switching capability • Epoxy sealed for automatic wave soldering and cleaning • UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement SPDT (1 Form C) SPST (1 Form A) Ratings Resistive load: SPST (1 Form B) Max. switched power: 300 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 150* VDC or 380 VAC UL Rating: 10 A at 30 VDC resistive 10 A at 250 VAC general use 1/4 HP 120 VAC 1/2 HP 250 VAC B 300 pilot duty *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Silver cadmium oxide or silver tin oxide Resistance < 30 milliohms initially (at rated current, voltage drop method) COIL Power At Pickup Voltage (typical) 100 mW Max. Continuous Dissipation 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient Temperature Rise 20°C (36°F) at nominal coil voltage Temperature Max. 110°C (230°F) NOTES Life Expectancy Mechanical Electrical Minimum operations 10 million 1 X 105 at 10 A 240 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 110°C (230°F) Vibration 0.062" DA at 10–55 Hz Shock 20 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 14 grams 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 04/15/05W AZ696 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.5 ORDER NUMBER Max Continuous VDC 12.0 Coil Resistance Ohms ± 10% 110 1 Form A (SPST-NO) AZ696–1A–5D 1 Form C (SPDT) AZ696–1C–5D AZ696–1C–6D 6 4.2 14.5 160 AZ696–1A–6D 9 6.3 22.0 360 AZ696–1A–9D AZ696–1C–9D 12 8.4 29.5 660 AZ696–1A–12D AZ696–1C–12D 18 12.6 44.0 1,500 AZ696–1A–18D AZ696–1C–18D 24 16.8 54.0 2,200 AZ696–1A–24D AZ696–1C–24D 48 33.6 102.0 8,000 AZ696–1A–48D AZ696–1C–48D * Substitute “1B” in place of “1A” for 1 Form B contact. ADD suffix “E” to “1A” or “1B” or “1C” for silver tin oxide contacts. Add Suffix “E” at the end of order number for sealed version. INTERNATIONAL APPROVALS Germany VDE 0435/09.72 at 8 Amps VDE 0631/12.83 at 8 Amps VDE 0700/1/2.81 at 8 Amps MECHANICAL DATA 1.10 (28) Coil Temperature Rise ˚C Coil Temperature Rise 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 .394 (10) 1.18 (30) .394 (10) .618 (15.7) .618 (15.7) .638 (16.2) .638 (16.2) .138 + .02 - 0 (3.5 + .5 - 0) .024 x .035 (0.6 x 0.9) .138 + .02 - 0 (3.5 + .5 - 0) .024 x .035 (0.6 x 0.9) .024 x .039 (0.6 x 1) .024 x .039 (0.6 x 1) 10A 0A 60% 80% 100% 120% 140% 160% 180% 200% 220% WIRING DIAGRAM PC BOARD LAYOUT Percent of Nominal Coil Voltage at 20˚C 2 x ∅ .051 (1.3) 1 Maximum Switching Capacity .122 (3.1) 10.0 9.0 8.0 7.0 6.0 5.0 2 x ∅.051 (1.3) DC Resistive Load 2 4 2 x ∅.059 (1.5) .748 (19) FORM A FORM B 3 1 FORM A .299 (7.6.) 1 .197 (5) 4 1 FORM C 2 3 5 4.0 .299 (7.6.) 3.0 AC Resistive Load .122 (3.1) 1.0 .9 .8 .7 .6 .5 .748 (19) FORM C .4 3 x ∅.059 (1.5) .126 (3.2) Viewed toward terminals 1 4 1 FORM B 2 5 .126 (3.2) Viewed toward terminals .3 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 1000 400 500 600 700 800 900 300 200 100 50 60 70 80 90 40 30 .1 20 .2 10 CURRENT 2.0 VOLTAGE 04/15/05W