DSM10G
DSM10G
Ordering number : EN2794C
Diffused Junction Silicon Diode
1.0A Power Rectifier
Features
•
•
•
Facilitates automatic mounting and miniaturization in end products.
Peak reverse voltage : VRM=600V.
Average output current : IO=1.0A.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Peak Reverse Voltage
Symbol
VRM
Average Output Current
IO
Surge Forward Current
Junction Temperature
Storage Temperature
IFSM
Tj
Tstg
Conditions
Ratings
600
1.0
0.75
25
150
--55 to +150
50Hz sine wave, mounted on an alumina board
Load resistor, mounted on a PCB
50Hz sine wave, non-repetitive, 1 cycle peak value
Unit
V
A
A
A
°C
°C
Electrical Characteristics at Ta=25°C
Parameter
Forward Voltage
Reverse Current
Thermal Resistance
© 2011, SCILLC. All rights reserved.
Jan-2011, Rev. 0
Symbol
Conditions
VF
IR
θj-l
IF=1A
VR=VRM
Junction-Lead
Junction-Ambient Mounted on an alumina board
Mounted on a PCB
θj-a
www.onsemi.com
Rev.0 I Page
1 of 3 I www.onsemi.com
Ratings
min
typ
max
1.1
10
23
108
157
Unit
V
µA
°C/W
°C/W
°C/W
Publication Order Number:
DSM10G/D
DSM10G
Package Dimensions
unit : mm (typ)
1188
Cathode mark
2.5
1.5
0.1
1.2
1.2
0.2
0.9
2.0
5.0
IF -- VF
10
IFSM -- n
35
Surge Foward Current, IFSM -- A
7
3
1.0
7
5
25°C
50°
C
2
Ta=
1
Forward Current, IF -- A
5
3
2
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Forward Voltage, VF -- V
25
10
5
0
1.0
ID01204
1.0
Resistive, inductive load
Capacitive load
Mounted on an
almina board
Mounted on a PCB
0.6
0.4
0.2
0
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
z
15
1.2
0.8
50H
20
IO -- Ta
1.4
Average Output Current, IO -- A
1.6
30
160
ID01206
Rev.0 I Page 2 of 3 I www.onsemi.com
2
3
5
7
10
2
3
Number of Cycles at 50Hz, n
5
7 100
ID01205
DSM10G
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of
the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply
high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications
can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals," must be validated for each customer application by customer’s
technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party’s intellectual property rights which has resulted from the use of the technical information and
products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components
in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create
a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affi liates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affi rmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
% !" "& ' " "
!"# $%
& !'#'"# !!'((' ! ) * $%+ & !!'" "'- ) *
&
.
" & ./&++000
+ & (" #-! "-!
*& !'#'"# !!'((' # ) * $%+ ! !
& ,
.
" #$&www.onsemi.com
$%+ & ''##' !
Rev.0 I Page 3 of 3 I www.onsemi.com
* 2/ / 1 DSM10G/D