CLV0625L-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Wireless Radios • Basestations • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 575 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -110 Harmonic Suppression (2nd) -10 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 675 MHz dBc/Hz -7 dBc 4.5 Vdc MHz/V 49 1 5 dBm 150 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) .5 MHz 85 °C Max Units Load Impedance 3 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) MINI-14S-L Min Typ 5 24 Vdc 30 mA Additional Notes Phase Noise @ 100 kHz offset (1 Hz BW, max.): -130 dBc/Hz LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV0625L-LF Rev B2 Tuning Curve, typ. FREQUENCY (MHz) 780 760 740 720 700 680 660 640 620 600 580 560 540 520 500 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 0.030 MIN. CUTBACK FROM LIVE PADS 3 2 1 0 532 561 586 610 634 658 682 706 730 754 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B