AIMTEC AM10EW-2424SC 10 watt dc-dc converter Datasheet

AM10EW-C Series
DC-DC CONVERTERS
10 watt dc-dc converters
•
POWER MODULES FOR PCB MOUNTING
•
4:1 WIDE INPUT RANGE
•
REGULATED OUTPUT
•
LOW RIPPLE & NOISE
•
REMOTE ON/OFF CONTROL ( OPTIONAL)
GENERAL DESCRIPTION
Our AM10EW-C series is a family of cost effective 10W single
output DC-DC converters. These converters are shielded on all
six sides and encapsulated with a nickel-coated copper with a
non-conductive base and dimensions of 50.8x25.4x10.5mm. The
high performance features of our AM10EW-C components
include short circuit protection with current limit auto recovery,
tight line regulation and a high efficiency operation coefficient up
to 83%. These wide range devices operate over 4:1 input voltage
range, providing a continuously stable output voltage.
Ten models operate from an input voltage range of 24 &
48VDC producing output voltages of 3,3, 5, 12, 15 &
24VDC. The normal operation is specified over the full
operating temperature range of -25°C to +71°C with no
derating required. Cooling is done by free air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
Filter
24VDC, 9~36VDC
48 VDC, 18~75VDC
p (Pi) Network
Isolation Specifications:
Rated voltage
Resistance
Capacitance
1500VDC
>1000 Mohms
1000pF
General Specifications:
Efficiency
Switching frequency
78% to 83%
300KHz, typ. 100% load
Environmental Specifications:
Operating temperature
-25°C …+71°C
Storage temperature
-55°C …+105°C
Case temperature
+95°C, max.
Humidity (non-condensing)
Up to 95%
Cooling
Free-air convection
Output Specifications:
Voltage accuracy
Ripple
Noise
Short circuit protection
Over current protection
±2%, max.
<0.2% Vout +20mVmax (Vp-p)
<0.5% Vout +50mVmax (Vp-p)
Current limit, auto-recovery
Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%, typ.
Load regulation (10-100%) ±1%, typ.
Temperature coefficient ±0.02%/°C, typ.
Physical Specifications:
Dimensions
50.8x25.4x10.5mm
2.0x1.0x0.413inches
Weight
32g
Case material
Nickel-Coated Copper with
Non-Conductive base,
six sides’ shielded
MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
76 Continued on next page
TO ORDER CALL 1-888-9-AIMTEC
AM10EW-C Series
OUTLINE DIMENSIONS
& PIN CONNECTIONS
Pin
Single
1
2
3
4
5
6
On/Off Control (Optional)
-V Input
+V Input
-V Output
No pin
+V Output
DERATING
DC-DC CONVERTERS
MECHANICAL DIMENSION (Top View)
BLOCK DIAGRAM
Single Output
MODELS
Single output
Models
AM10EW-2403SC
AM10EW-2405SC
AM10EW-2412SC
AM10EW-2415SC
AM10EW-2424SC
AM10EW-4803SC
AM10EW-4805SC
AM10EW-4812SC
AM10EW-4815SC
AM10EW-4824SC
Input Voltage
9VDC-36VDC
18VDC-75VDC
Ouput Voltage
3.3VDC
5VDC
12VDC
15VDC
24VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
Ouput Current max.
2000mA
2000mA
830mA
670mA
420mA
2000mA
2000mA
830mA
670mA
420mA
77
VISIT US AT WWW.AIMTEC.CA
Similar pages