HDSP-Ax11 Black Surface Seven Segment Displays Data Sheet HDSP-AX11/-AX13 Series, HDSP-FX11/-FX13 Series HDSP-GX11/-GX13 Series, HDSP-HX11/-HX13 Series HDSP-KX11/-KX13 Series Description These devices use industry standard size package and pinout. Available with black surface finish. All devices are available as either common anode or common cathode. Typical applications include appliances, channel indicators of TV, CATV converters, game machines, and point of sale terminals. Features • Black surface and color tinted epoxy • Industry standard size • Industry standard pinout • Choice of character size 7.6 mm (0.30 in.), 10 mm (0.40 in.), 14.2 mm (0.56 in.) • Choice of colors AlGaAs Red, High Efficiency Red (HER), Green, Orange • Excellent appearance Evenly lighted segments ± 50° Viewing angle • Design flexibility Common anode or common cathode Single and two digit • Categorized for luminous intensity Categorized for color: Green Use of like categories yields a uniform display • Excellent for long digit string multiplexing Devices Orange HDSP- AlGaAs Red HDSP- HER HDSP- Green HDSP- Description Package Drawing A411 A111 A211 A511 7.6 mm Common Anode Right Hand Decimal A A413 A113 A213 A513 7.6 mm Common Cathode Right Hand Decimal B F411 F111 F211 F511 10 mm Common Anode Right Hand Decimal C F413 F113 F213 F513 10 mm Common Cathode Right Hand Decimal D G411 G111 G211 G511 10 mm Two Digit Common Anode Right Hand Decimal E G413 G113 G213 G513 10 mm Two Digit Common Cathode Right Hand Decimal F H411 H111 H211 H511 14.2 mm Common Anode Right Hand Decimal G H413 H113 H213 H513 14.2 mm Common Cathode Right Hand Decimal H K411 K111 K211 K511 14.2 mm Two Digit Common Anode Right Hand Decimal I K413 K113 K213 K513 14.2 mm Two Digit Common Cathode Right Hand Decimal J Part Numbering System 5082 - X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] 1: Common Anode 3: Common Cathode Device Specific Configuration[1] Refer to Respective Datasheet Package[1] A: 7.6 mm (0.3 inch) Single Digit Seven Segment Display F: 10 mm (0.4 inch) Single Digit Seven Segment Display G: 10 mm (0.4 inch) Dual Digit Seven Segment Display H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display K: 14.2 mm (0.56 inch) Dual Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions (7.6 mm Series) Internal Circuit Diagram Package Dimensions (10 mm Series: Single) Internal Circuit Diagram 3 Package Dimensions (10 mm Series: Two Digit) 4 Internal Circuit Diagram Package Dimensions (14.2 mm Series: Single) Internal Circuit Diagram Package Dimensions (14.2 mm Series: Two Digit) Internal Circuit Diagram 2 DIGIT NO. 1 CATHODE 1 5 Absolute Maximum Ratings Description AlGaAs Red HDSP-X11X Series HER/Orange HDSP-X21X/X41X Series Green HDSP-X51X Series Units Average Power per Segment or DP 37 105 105 mW Peak Forward Current per Segment or DP 45 90[1] 90[3] mA DC Forward Current per Segment or DP 15[5] 30[2] 30[4] mA Operating Temperature Range –20 to +100 °C –40 to +100 Storage Temperature Range –55 to +100 °C Reverse Voltage per Segment or DP 3.0 V Wave Soldering Temperature for 3 Seconds (1.60 mm [0.063 in.] below Body) 250 °C Notes: 1. See Figure 5 to establish pulsed conditions. 2. Derate above 53°C at 0.45 mA/°C (see Figure 7). 3. See Figure 6 to establish pulsed conditions. 4. Derate above 39°C at 0.37 mA/°C (see Figure 7). 5. Derate above 91°C at 0.53 mA/°C (see Figure 1). Electrical/Optical Characteristics at TA = 25°C AlGaAs Red Device Series HDSPA11X Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2] (Digit Average) IV 315 600 F11X, G11X 330 H11X, K11X All Devices 400 Forward Voltage/Segment or DP VF Max. Units Test Conditions µcd IF = 1 mA 3600 IF = 5 mA 650 IF = 1 mA 3900 IF = 5 mA 700 IF = 1 mA 4200 IF = 5 mA 1.6 2.0 V 1.7 1.8 Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or A11X F11X, G11X H11X, K12X 6 DP[4] IF = 5 mA 22 IF = 20 mA Peak lPEAK 645 nm ld 637 nm 15 V VR 3.0 Temperature Coefficient of VF/Segment or DP ∆VF/°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RqJ-PIN 255 °C/W/ Seg. 320 400 IF = 1 mA IR = 100 µA Orange Device Series HDSPA41X F41X, G41X Parameter Symbol Luminous Intensity/Segment (Segment Average)[1,2] IV Min. Test Conditions mcd IF = 5 mA 1.0 IF = 5 mA 2.37 IF = 10 mA VF 2.0 Peak Wavelength lPEAK 600 nm ld 603 nm 30 V Reverse Voltage/Segment or F41X, G41X Units Forward Voltage/Segment or DP Dominant Wavelength[3] A41X Max. 0.70 H41X, K41X All Devices Typ. DP[4] VR 3.0 2.5 V Temperature Coefficient of VF/Segment or DP ∆VF/°C –2 mV/°C Thermal Resistance LED Junction-to-Pin RqJ-PIN 200 °C/W/ Seg. 320 H41X, K41X IF = 20 mA IR = 100 µA 345 High Efficiency Red Device Series HDSPA21X Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2] (Digit Average) IV 360 980 Max. Units Test Conditions µcd IF = 5 mA 5390 IF = 20 mA F21X, G21X 420 1200 IF = 5 mA H21X, K21X 900 2800 IF = 10 mA 3700 IF = 60 mA Peak: 1/6 Duty Factor All Devices Forward Voltage/Segment or DP VF 2.0 Peak Wavelength lPEAK 635 nm ld 626 nm 30 V Dominant Wavelength[3] Reverse Voltage/Segment or A21X F21X, G21X H21X, K21X 7 DP[4] VR 3.0 2.5 V Temperature Coefficient of VF/Segment or DP ∆VF/°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RqJ-PIN 200 °C/W/ Seg. 320 345 IF = 20 mA IR = 100 µA High Performance Green Device Series HDSPA51X Parameter Luminous Intensity/Segment[1,2] (Digit Average) Symbol Min. Typ. IV 860 3000 Max. Units Test Conditions µcd IF = 10 mA 6800 IF = 20 mA F51X, G51X 1030 3500 IF = 10 mA H51X, K51X 900 2500 IF = 10 mA 3100 IF = 60 mA Peak: 1/6 Duty Factor All Devices Forward Voltage/Segment or DP VF 2.1 Peak Wavelength lPEAK 566 Wavelength[3,5] ld 571 Reverse Voltage/Segment or DP[4] VR Temperature Coefficient of Dominant 3.0 2.5 V IF = 10 mA nm 577 nm 50 V ∆VF/°C -2 mV/°C RqJ-PIN 200 °C/W/ Seg. IR = 100 µA VF/Segment or DP A51X F51X, G51X H51X, K51X Thermal Resistance LED Junction-to-Pin 320 345 Notes: 1. Case temperature of device immediately prior to the intensity measurement is 25°C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. Green (HDSP-A51X/F51X/G51X/H512X/K51X) series displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 8 20 50.0 18 Rθ 16 J-A 20.0 = 770°C/W I F – FORWARD CURRENT PER SEGMENT – mA I F AVE. MAX – MAXIMUM AVERAGE FORWARD CURRENT PER SEGMENT – mA AlGaAs Red 14 12 10 8 6 4 10.0 5.0 2.0 1.0 0.5 0.1 2 0 20 30 40 50 60 70 80 0 90 100 110 120 0.5 1.0 1.5 2.0 2.5 V F – FORWARD VOLTAGE – V T A – AMBIENT TEMPERATURE – °C Figure 2. Forward current vs. forward voltage. Figure 1. Maximum allowable average or dc current vs. ambient temperature. 1.3 η PEAK– RELATIVE EFFICIENCY – NORMALIZED TO 1 AT 1 mA RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 1 mA) 20 10 5 2 1 0.5 0.2 1.1 1.0 0.9 0.5 mA 0.8 0.7 0.1 0.1 0.2 0.5 1 2 5 10 I F – FORWARD CURRENT PER SEGMENT – mA Figure 3. Relative luminous intensity vs. dc forward current. 9 1.2 20 0 5 10 20 30 40 50 I PEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. OPERATION IN THIS REGION REQUIRES TEMPERATURE DERATING OF I DC MAXIMUM 10 10 100 1000 DC OPERATION 100 OPERATION IN THIS REGION REQUIRES TEMPERATURE DERATING OF I DC MAXIMUM 10 z 0H 10 z 0H 30 Hz 1K Hz 3K z KH z KH 1 z H 0 10 z 0H 30 z 1H Hz 3K 10 1 I F PEAK RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE I DC MAX DERATED DC CURRENT 100 10 I F PEAK RATIO OF MAXIMUM OPERATING I DC MAX PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT HER, Green, Orange 1 10000 1 10 t P – PULSE DURATION – µs J-A = 770°C/W 40 35 30 HER / ORANGE 25 GREEN 20 15 10 5 0 20 30 40 50 60 70 80 100 80 60 40 HER / ORANGE 20 GREEN 0 0 90 100 110 120 1.0 T A – AMBIENT TEMPERATURE – °C 3.0 4.0 5.0 Figure 8. Forward current vs. forward voltage characteristics. 12 1.8 ηPEAK – RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 5 mA FOR HER, AND 10 mA FOR GREEN) ηPEAK – RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 5 mA FOR HER, AND TO 1 AT 10 mA FOR GREEN) 2.0 V F – FORWARD VOLTAGE – V Figure 7. Maximum allowable dc current vs. ambient temperature. 10 HER / ORANGE 8 6 4 GREEN 2 HER / ORANGE 1.6 1.4 GREEN 1.2 1.0 0.8 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT PER SEGMENT – mA Figure 9. Relative luminous intensity vs. dc forward current. 10 DC OPERATION 10000 Figure 6. Maximum tolerable peak current vs. pulse duration – Green. IF – FORWARD CURRENT PER SEGMENT – mA I DC MAX – MAXIMUM DC CURRENT PER SEGMENT – mA 50 Rθ 1000 t P – PULSE DURATION – µs Figure 5. Maximum tolerable peak current vs. pulse duration – HER, Orange. 45 100 0 20 40 60 80 100 I PEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 10. Relative efficiency (luminous intensity per unit current) vs. peak current. Intensity Bin Limits (mcd) AlGaAs Red Orange HDSP-A41X HDSP-A1xx IV Bin Category Min. Max. E 0.315 0.520 F 0.428 0.759 G 0.621 1.16 H 0.945 1.71 I 1.40 2.56 J 2.10 3.84 K 3.14 5.75 L 4.70 8.55 HDSP-F1xx/G1xx IV Bin Category Min. Max. D 0.391 0.650 E 0.532 0.923 F 0.755 1.39 G 1.13 2.08 H 1.70 3.14 HDSP-H1xx/K1xx IV Bin Category Min. Max. C 0.415 0.690 D 0.565 0.990 E 0.810 1.50 F 1.20 2.20 G 1.80 3.30 H 2.73 5.00 I 4.09 7.50 11 IV Bin Category Min Max A 0.284 0.433 B 0.354 0.541 C 0.443 0.677 D 0.554 0.846 E 0.692 1.057 F 0.856 1.322 G 1.082 1.652 H 1.352 2.066 I 1.692 2.581 J 2.114 3.227 K 2.641 4.034 L 3.300 5.042 M 4.127 6.303 N 5.157 7.878 IV Bin Category Min Max C 0.485 0.890 D 0.728 1.333 E 1.091 2.000 F 1.636 3.000 G 2.454 4.500 H 3.682 6.751 IV Bin Category Min Max B 0.77 1.17 C 0.95 1.45 D 1.19 1.82 E 1.49 2.27 F 1.85 2.89 G 2.32 3.54 H 2.90 4.43 HDSP-F41X/G41X HDSP-H41X/K41X Intensity Bin Limits (mcd), continued HER HDSP-A2xx IV Bin Category Min. Max. B 0.342 0.630 C 0.516 0.946 D 0.774 1.418 E 1.160 2.127 F 1.740 3.190 G 2.610 4.785 H 3.915 7.177 IV Bin Category Min. Max. C 0.485 0.890 D 0.728 1.333 E 1.091 2.000 F 1.636 3.000 G 2.454 4.500 H 3.682 6.751 IV Bin Category Min. Max. E 0.91 1.67 F 1.37 2.51 G 2.05 3.76 H 3.08 5.64 I 4.62 8.64 J 6.93 12.70 K 10.39 19.04 HDSP-F2xx/G2xx HDSP-H2xx/K2xx 12 Intensity Bin Limits (mcd), continued Green HDSP-A5xx IV Bin Category Min. Max. H 0.86 1.58 I 1.29 2.37 J 1.94 3.55 K 2.90 5.33 L 4.37 8.01 IV Bin Category Min. Max. H 1.54 2.82 I 2.31 4.23 J 3.46 6.34 K 5.18 9.50 L 7.78 14.26 IV Bin Category Min. Max. E 0.91 1.67 F 1.37 2.51 G 2.05 3.76 H 3.08 5.64 I 4.61 8.46 HDSP-F5xx/G5xx HDSP-H5xx/K5xx Color Categories Dominant Wavelength (nm) Color Bin Min. Max. Green 2 573.00 577.00 3 570.00 574.00 4 567.00 571.00 5 564.00 568.00 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representatives for further clarification/information. 13 Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning For information on soldering LEDs, please refer to Application Note 1029. Electrical/Optical For more information on electrical/optical characteristics, please see Application Note 1005. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. Obsoletes 5988-4433EN 5989-2795EN April 10, 2006