SL Power DMX-504-1205 500 watts multiple output 48 vdc input, forced current sharing Datasheet

500 WATTS
MULTIPLE OUTPUT
48 VDC INPUT, FORCED CURRENT SHARING
DMX-500
Featuring:
• Forced current sharing for N +1
redundancy
• Identical output performance as
NMX-500 Series with 48 Vdc input
• Remote sense on outputs #1 and 2
• Dual converter design eliminates
interaction between logic and
auxiliary outputs
• Low ripple and noise on all outputs
• Input transient specification up to
75 V
• DC power good signal
• True remote inhibit
• Monotonic turn-on and turn-off
• Designed for use in telephone
network systems
STANDARD DMX SERIES
MODEL
PWR
DMX-503-0512
DMX-504-1205
DMX-504-1212
DMX-504-1224
DMX-504-1512
DMX-504-1524
500
500
500
500
500
500
OUTPUT #1
+5V
+5V
+5V
+5V
+5V
+5V
@
@
@
@
@
@
75A
75A
75A
75A
75A
75A
OUTPUT #2
OUTPUT #3
+12V @ 8/12A pk
+12V @ 8/12A pk
+12V @ 8/12A pk
+12V @ 8/12A pk
+15V @ 4A
+15V @ 4A
-12V @ 4A
-12V @ 4A
-12V @ 4A
-12V @ 4A
-15V @ 4A
-15V @ 4A
Designed to meet applicable Bellcore and
NEBS standards, the DMX Series 500-watt
power supplies require DC input. They are
DC “clones” of Condor’s popular NMX 500
Series of AC power factor corrected power
supplies. This gives you the ability to
operate existing systems from central
office power (–48 Vdc) simply by changing
power supplies.
DMX and NMX Series power supplies
are directly interchangeable, without
compromising performance and without
making any mechanical changes for
mounting or cooling. DMX and NMX Series
power supplies can also be operated in
redundant configurations to achieve AC
operation with battery backup capability.
OUTPUT #4
5.2V @ 5A
12V @ 5A
24V @ 3A
12V @ 5A
24V @ 3A
SEE
00T
5
X
NMR AC INEPNUT
FO UIVAL
EQ
Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com
500 WATTS
9.65”x 5”x 2.10”
DMX-500
Dimensions:
DMX-500
DMX-500 with Option F
3.7 lbs - 1.7 kgs
3.9 lbs - 1.8 kgs
Inches
Millimeters
SPECIFICATIONS: ALL MODELS
INPUT
DC Input: 40-60 Vdc range. Internally fused for 25 A.
Efficiency: 75% typical.
OUTPUT
Adjustability: Outputs #1 and 2 user adjustable ±5% minimum. Output #3 tracks #2; initial
accuracy ±4%. Output #4 user adjustable ±5% minimum.
Line & Load Reg: Outputs #1, 2, and 4 hold ±1% over DC input range and 0 to 100% load
change. Output #3 requires 20% minimum load on outputs #2 and 3 to hold ±4%.
Ripple & Noise: Less than 1% p-p or 100 mV, whichever is greater.
Remote Sense (Outputs #1 and 2): Compensates for 250 mV total line drop. Open sense lead
protection. (See Redundancy, below.)
Temperature Coefficient (Outputs #1, 2, and 4): 0.02% per degree C.
Stability: 0.1% over 8 hours after 30 minutes warm-up.
Transient Response (Outputs #1, 2, and 4): Output voltage returns to within 1% in less than
500 µs for a 50% load change. Peak transient does not exceed 5%.
Overload Protection: All outputs are protected against overload and short circuit. Automatic
recovery upon removal of fault.
Overvoltage Protection (Outputs #1 and 2): Protects load against power supply induced overvoltage. Trip point is factory set so that output voltage cannot exceed 136% of nominal.
Peak Output Current: Dual current ratings define continuous and peak currents. The peak current shown can be delivered for a maximum period of 30 seconds.
Remote Inhibit: Contact closure to the negative sense line or a TTL level “0” turns off DC
outputs.
Redundancy: External OR-ing diodes and forced current sharing on output #1 provide “N+1”
capability. Remote sense (+S) compensates for additional 0.6 V diode voltage drop.
When the current sharing terminal is connected among units, current sharing remains
within 10% of the unit’s full output current rating.
DC Power Good: Provides a TTL “1” open collector when output #1 is above 4.6 V nominal.
Reverse Voltage: Protected against reverse voltage up to supply current rating.
ENVIRONMENTAL
Thermal Protection: Shuts down power supply if overheated. Automatic recovery.
Temperature Range: 0° to 50°C at full ratings.
Safety Agencies: Most models are approved to UL1950; CSA 22.2 #234; IEC 950 and TÜV
EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive).
Conducted RFI: Meets FCC Part 15, Subpart J, Class A; EN55022 Class B; CISPR 22 Class B.
Cooling: 30 CFM required to achieve full ratings.
Output Isolation: Isolated from ground 50 Vdc.
DC INPUT
FUNCTION
TB1- (– )
TB1- ( + )
TB1- ( )
48 Vdc
-48 VDC Input
-48 VDC Return
Safety Ground
DC OUTPUT
FUNCTION
Output #1
Output #2
Output #3
Output #4
LOCATION
Terminal marked +V
Terminal marked -V
J1-5, 10
J1-4, 9
J1-3, 8
J1-4, 9
J1-2, 7
J1-1, 6
Consult factory for other available options.
NOTES
Main Output
Rtn (Common)
CONNECTOR
Bus bars
#8-32 screws
Rtn (Common)
Rtn (Common)
(+) Floating
Output
(–) Floating
Output
AMP #770743-1
mates with connector
#770580-1 with
sockets #171639-1
STATUS AND CONTROL
FUNCTION
Remote Sense
DC Power Good
Inhibit
LOCATION
J2-2
J2-1
J2-8
J2-7
J2-3
J2-5
OPTIONS:
Option “F”, Fan/Cover Assembly: Cover with integral ball-bearing fan provides proper cooling to achieve full ratings at 50°C ambient temperature. 2.10” dimension increases to 3.31”.
Option “V”, Fan/Cover Assembly: Low profile, end venting cover with integral ball-bearing fan.
2.10” dimension increases to 2.50”, and 9.65” dimension increases to 11”.
CONNECTOR
Barrier strip
#6-32 screws
3/8” centers
Current Share
Aux. Fan Voltage
(Not available with
“V” or “F” options)
J2-6
J3-1
J3-2
NOTES
Output #1 Sense
Output #1 Sense Rtn
Output #2 Sense
Output #2 Sense Rtn
Reference to Common
Reference to Common
when #1 Sense Rtn
is terminated.
+12V @ 0.5A Output
Rtn (Common)
CONNECTOR
AMP MTA type
#640456-8 pin
header (locking)
AMP MTA type
#640456-2 pin
header (locking)
Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com
Similar pages