IEC-2002 10/100/1000 Industrial Media Converter, SC MM 2KM, -40 to 75C Overview Safety Fault Detection High Reliability LevelOne IEC-2002 is an industrial Gigabit Ethernet media converter with a rugged aluminium case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes. Relay contact sends alert signal when the power failed or a port link disconnected, therefore the system operator can respond quickly. This relay contact can be easily configured with a simple DIP switch. Complies with NEMA (National Manufacturers Association) TS1 & TS2 Environmental certified for the Traffic Control Equipment that withstand extreme temperatures, operating voltage and humidity fluctuation, vibration and shock commonly experienced in severe outdoor environments. All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. Features - Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment - Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment - 1000Base-SX Multi-mode fiber for the link up to 2 kilometers - DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode - 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Full wire-speed forwarding rate - Alarms for power and port link failure by relay output - -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F) - IP30 aluminum case - Supports DIN-rail mounting installation Diagrams Unit: mm 135 50 110 er1 2 - Top w Po 3 Back er er Side + w Po w Po Front - + Buttom Specifications Technology Standards Environment IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab1000BASE-T, IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x Forward and Filtering Rate 1,488,100pps for 1000Mbps Power Voltage Input: 12 to 48VDC (Terminal Block); 12VDC (DC Jack) Power Consumption 7.68W, Max., 0.16A @ 48VDC Overload Current Protection Present Reverse Polarity Protection Present Operating Temperature -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) MTBF 53.10 years Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 EMI FCC Part 15, Class A EN61000-6-3 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 4KV Air: + / - 8KV - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 2.7GMHz; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line D.C. Power Ports: + / - 0.5KV; Line-to-earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/ Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) FED STD 101C Method 5007.1 (Free fall w/ package) -Tested with Cross Weight and Drop High standard table Mechanical Casing Aluminum case IP30 Dimensions 50mm (W) x 110mm (D) x 135mm (H) (1.97" (W) x 4.33" (D) x 5.31" (H)) Weight 0.8Kg (1.76lbs.) Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting Interface Ethernet Port 10/100/1000BASE-TX: 1 port Gigabit SFP: 1 port LED Indicators Per Unit: Power Status (Power1, Power2, Power3, Fault), LFPT Per Port: 10/100/1000TX: Link/Activity, Speed, Fullduplex/Collision Gigabit SFP: Link/Activity Relay Contact Relay contact rating with current 1A @ 30VDC, 0.5A @ 120VAC Order Information IEC-2002- 10/100/1000 Industrial Media Converter, SC MM 2KM, -40 to 75C Package Contents IEC-2002 Quick Installation Guide www.level1.com one world_one brand_one level_