PowerPlus DC • Optically Isolated MOSFET output • Ratings from 10A to 100A @ 48 VDC • AC or DC control • Relays are easily paralleled for higher-current applications • LED Status Indicator • Optional IP20 Cover • UL Recognized, CE and RoHS Compliant • PWM to 1K Hz PRODUCT SELECTION Control Voltage 4-32 VDC 90-140 VAC 10A 20A 40A 60A 80A 100A DC60D10 DC60A10 DC60D20 DC60A20 DC60D40 DC60A40 DC60D60 DC60A60 DC60D80 DC60D100 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage [Vdc] (2) Blocking Voltage Rated Load Current [Adc] (3) Minimum Load Current [mA] (4) Maximum Surge Current [Adc] (10ms) Maximum On-State Voltage Drop @ Rated Current [Vdc] Maximum Off-State Leakage Current @ Rated Voltage [mA] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum On-State Resistance @ Rated Current [RDS-ON][mOhms] Maximum PWM [Hz] (5) 10A 20A 40A 60A 80A 100A 1-48 VDC 60 10 2.5 78 0.33 0.1 2.1 33.4 1K 1-48 VDC 60 20 2.5 108 0.35 0.1 1.2 17.6 1K 1-48 VDC 60 40 2.5 163 0.62 0.1 1.1 15.6 900 1-48 VDC 60 60 2.5 200 0.62 0.1 0.8 10.4 900 7-48 VDC 60 80 2.5 258 0.75 0.1 0.7 9.4 700 7-48 VDC 60 100 2.5 326 0.59 0.1 0.53 5.9 700 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Input Current @ min Control Voltage [mA] Maximum Input Current @ max Control Voltage [mA] Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] DCxxDxx DCxxAxx 4-32 VDC 11 12 Current Regulated 0.075 0.32 90-140 VAC 11 13 Current Regulated 10 10 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (6) Ambient Storage Temperature Range Housing Material Weight (typical) (7) Encapsulation (8) Terminal Finish Recommended Terminal Screw Torque (6-32) [in lbs/Nm] Recommended Terminal Screw Torque (8-32) [in lbs/Nm] GENERAL NOTES 1) All parameters at 40°C and per section unless otherwise specified. 2) Maximum voltage is 60VDC 3) Heat sinking required, see derating curves. 4) Low current loads and high ambient temperature can affect turn-on time. 5) @ a minimum of 8VDC control. See PWM Derating Information page 3. 6) Maximum Ambient Operating Temperature for the AC control relays is 65°C. 7) Typical weight for the AC control relays is 2.99 oz/85g. 8) AC controlled relays contain thermal conductive epoxy. MECHANICAL SPECIFICATIONS Parameters 2500 Vrms 109 Ohm 10 pF -30 to 80°C -40 to 125 °C Valox 420 SEO Black, UL 94 V-0 2.65 oz (75g) Epoxy Free Electroless Nickel 10/1.1 20/2.2 WIRING DIAGRAM PWM DERATE INFORMATION AGENCY APPROVALS IEC 61000-4-2 Electrostatic Discharge Level 3, Criteria A IEC 61000-4-4 Electrically Fast Transients Level 3, Criteria A IEC 61000-4-5 Electrical Surges Level 3, Criteria A E116950 072312 THERMAL DERATE INFORMATION ANNEX - ENVIROMENTAL INFORMATION