E9335AA thru E9336AA Low Profile Surface Mount Single Phase Bridge Rectifiers Reverse Voltage 600~800V Output Current 3A Features • • • • • • • Low forward voltage drop Low leakage current Solder dip 260 °C, 10 s Ideal for automated placement Glass passivated standard bridge rectifiers Moisture sensitivity: level 1, per J-STD-020 Low profile，Typical Height 1.3mm Typical Applications case: E93 For use of general purpose AC to DC bridge rectification in power supply，charger，office appliance， home appliance and telecome device. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol E9335AA E9336AA Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average output rectified current VRRM VRMS VDC Io(AV) 600 800 V 420 560 V 600 800 V Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Rating for fusing(t<8.3ms) Operating junction and storage temperature range 3.0 A IFSM 80 A I2t TJ, TSTG 26.7 A2sec - 55 to + 150 °C Electrical Characteristics Parameter Maximum instantaneous forward voltage Test Conditions IF=1.5A, TA=25℃ (TA = 25 °C unless otherwise noted) Symbol E9335AA VF Maximum DC reverse TA=25℃ current at rated DC blocking TA=125℃ voltage IR Typical junction capacitance(1) CJ E9336AA 0.95 Unit Volts 5 µA 250 22.7 pF Thermal Characteristics Parameter Typical thermal resistance(2) Notes: www.goodark.com Symbol E9335AA E9336AA RθJA 24 RθJC 7.2 Unit ℃/W 1. Measured at 1.0MHz and applied reverse voltage of 4.0 D.C. 2. On glass epoxy PCB, mounted recommended copper pad areas 1/4 2015.12-Rev.A E9335AA thru E9336AA Low Profile Surface Mount Single Phase Bridge Rectifiers Reverse Voltage 600~800V Output Current 3A Ratings and Characteristics Curves Peak Forward Surge Current （A） Bridge Output Full Wave Rectified Current, （A） (TA = 25℃ unless otherwise noted) 3 2.5 2 1.5 1 0.5 0 0 80 70 60 50 40 30 20 10 0 1 25 50 75 100 125 150 Case temperature（℃） Figure 1.Output Rectifier Current Derating Curve 10 1 25℃ 85℃ 125℃ 150℃ 0.1 0.01 100000 10000 1000 100 10 1 0.1 0.01 0.001 Instantaneous Reverse Current (uA) Instantaneous Forward Current (A) 100 10 100 Number of Cycles at 60Hz Figure 2.Maximum Non-Repetitive Peak Forward Surge Current 25℃ 85℃ 125℃ 150℃ 0 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Instantaneous Forward Voltage (V) Figure 3. Typical Forward Characteristics Figure 4. Typical Reverse Characteristics Junction Capacitance (pF) 100 10 Tj=25℃ f=1.0MHZ Vsig=50mVp-p 1 0.10 1.00 10.00 Reverse Voltage (V) Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2015.12-Rev.A E9335AA thru E9336AA Low Profile Surface Mount Single Phase Bridge Rectifiers Reverse Voltage 600~800V Output Current 3A Package Outline Dimensions unit:mm Dim A B B1 C D D1 E E1 Min 1.15 12.75 12.75 0.20 3.20 10.72 12.15 12.15 Nom. 1.30 13.0 13.0 0.25 3.40 10.9 12.30 12.30 Max 1.45 13.25 13.25 0.40 3.60 11.12 12.45 12.45 Dim F1 F2 F3 H H1 K K1 Min 4.16 4.16 3.20 4.12 2 0.85 1.45 Nom. 4.36 4.36 3.40 4.42 2.15 1.0 1.7 Max 4.56 4.56 3.60 4.72 2.35 1.15 1.95 Soldering Footprint unit:mm www.goodark.com 3/4 2015.12-Rev.A E9335AA thru E9336AA Low Profile Surface Mount Single Phase Bridge Rectifiers Reverse Voltage 600~800V Output Current 3A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou GoodArk product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.12-Rev.A