N S A M 23.1×17.2×16.2 Features Switching capacity up to 20A. PC board mounting. Suitable for automobile auxiliary. Ordering Information NSAM 2C S 15 1 2 3 12VDC 4 5 1 Part number：NSAM 2 Contact arrangement：2A:2A；2C:2C； 3 Enclosure：S: Sealed type；Z: Dust cover 4 Contact Current：7A,10A,15A,20A 5 Coil rated Voltage(V)：DC:3,5,6,9,12,18,24 Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation Electrical life Mechanical 2ADPSTNO 2CDPDT(B-M) AgSnO2 NO: 15A,20A/15VDC, 10A,15A/24VDC,125VAC ; NC: 10A,15A/15VDC,125VAC; 7A,10A/24VDC 300W 2000VA 30VDC 220VAC Max. Switching Current:20A አ50m Item 3.12 of IEC255-7 105 Item 3.30 of IEC255-7 107 Item 3.31 of IEC255-7 Coil Parameter Dash numbers Coil voltage VDC Coil resistance ±10% Pickup voltage VDC(max) (75%of rated voltage ) release voltage VDC(min) (5% of rated voltage) 56 3.75 0.25 Rated Max. 005-450 5 6.5 006-450 6 7.8 80 4.50 0.30 009-450 9 11.7 180 6.75 0.45 012-450 12 15.6 320 9.00 0.60 018-450 18 23.4 720 13.5 0.90 024-450 24 31.2 1280 18.0 1.20 Coil power consumption W Operate Time ms Release Time ms 0.45 10 5 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 123 www.dblectro.com NSAM Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil 100M min (at 500VDC) Item 7 of IEC255-5 50Hz 500V 50Hz 1000V Item 6 Item 6 Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 100m/s2 11ms 10~55Hz double amplitude 5N 2352 30.5s -30~80 85% (at 45) 15g of IEC255-5 of IEC255-5 IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 1.5mm IEC68-2-3Test Ca Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Dimensions (Unit: mm) Mounting (Bottom views) Dimensions 2C 2A Wiring diagram(Bottom views) mm 0.4 1.0 1.2 1.25 1.3 2.6 3.0 3.5 4.0 5.3 6.0 6.1 8.0 11 11.6 16.2 17.2 23.1 >àçÇá 0.016 0.039 0.047 0.049 0.051 0.102 0.118 0.138 0.157 0.209 0.236 0.240 0.315 0.433 0.457 0.638 0.677 0.909 NOTES 1).Dimensions are in millimeter. 2).Inch equivalents are given for general information only. Reference Data www.dblectro.com